FIBARO FGDW-002-1 Door/Window Sensor 2 with Temperature Sensor User Manual

1. Вовед

The FIBARO Door/Window Sensor 2 (model FGDW-002-1) is a battery-powered Z-Wave Plus reed sensor designed to monitor the opening and closing status of doors, windows, gates, and garage doors. It also features an integrated temperature sensor, allowing for environmental monitoring. This device enhances smart home capabilities by enabling automatic light control, access control, and property protection systems. Its installation can contribute to increased safety and comfort within a home, and assist in managing energy consumption by detecting open windows or doors.

The sensor is compatible with various Z-Wave smart hubs, including Home Center 2 and Lite, SmartThings, Samsung Connect, Verizon SmartHUB, Homeseer, and Nexia.

2. Производот завршиview

The FIBARO Door/Window Sensor 2 consists of two main components: the sensor unit and a magnet. These components are designed to be mounted on a door or window frame and its moving part, respectively. When the magnet moves away from the sensor unit, it detects an open state.

Слика 2.1: FIBARO Door/Window Sensor 2 packaging, showing the main sensor unit and the smaller magnet component.

Слика 2.2: The FIBARO Door/Window Sensor 2 installed on a window frame, demonstrating its compact and discreet design.

Слика 2.3: The FIBARO Door/Window Sensor 2 on a window, with a smartphone displaying a 'Tamper Detected' notification, indicating enhanced security.

Слика 2.4: The FIBARO Door/Window Sensor 2 installed on a garage door, with a smartphone displaying a 'Garage door is still open!' notification, highlighting its utility for various entry points.

Слика 2.5: A wall-mounted tablet displaying smart home data, potentially including information from the FIBARO Door/Window Sensor 2, such as temperature or open/close status.

Слика 2.6: A smartphone displaying the FIBARO application interface, used for monitoring and controlling smart home devices, including the Door/Window Sensor 2.

Слика 2.7: The FIBARO Home Intelligence logo, representing the brand's smart home ecosystem.

Слика 2.8: An image illustrating the compatibility of FIBARO devices with various Z-Wave hubs, including Fibaro, Hubitat, Stratis, Zipato, Z-Box, HomeSeer, Smart Home, eedomus, ezlo, and SmartThings | Aeotec.

Видеа со производи

3. Поставување и инсталација

Before installation, ensure you have the following included components:

• FIBARO Door/Window Sensor 2 unit
• Magnet component
• 1x CR123A battery (pre-installed or included separately)
• Лента за монтирање
• Упатство за употреба

3.1. Инсталација на батерија

The sensor requires one CR123A battery. If not pre-installed, open the sensor casing and insert the battery, observing correct polarity. Close the casing безбедно.

3.2. Монтирање на сензорот

The FIBARO Door/Window Sensor 2 is designed for easy mounting using the provided adhesive tape. Choose a clean, dry, and flat surface on your door or window frame.

1. Clean the surface where the sensor and magnet will be mounted.
2. Attach the main sensor unit to the fixed part of the door or window frame.
3. Attach the smaller magnet component to the moving part of the door or window, ensuring it aligns with the sensor unit when the door/window is closed. The gap between the sensor and magnet should be minimal for reliable detection.
4. Press firmly for several seconds to ensure proper adhesion.

3.3. Спарување со Z-Wave Hub

To integrate the sensor into your smart home system, it must be paired with a compatible Z-Wave hub. Refer to your specific Z-Wave hub's instructions for adding new devices. Generally, the process involves:

1. Place your Z-Wave hub in inclusion (pairing) mode.
2. Activate the sensor's pairing mode (often by pressing a button on the sensor or removing/reinserting the battery). Consult the sensor's quick start guide for exact steps.
3. Confirm successful pairing through your Z-Wave hub's interface.

Compatible hubs include SmartThings, Samsung Connect, Verizon SmartHUB, Homeseer, Nexia, and Fibaro HC2/HCL.

4. Упатства за работа

Once installed and paired, the FIBARO Door/Window Sensor 2 provides real-time status updates to your Z-Wave hub.

4.1. Monitoring Open/Close Status

The sensor detects when a door, window, or other monitored entry point is opened or closed. This information is transmitted to your Z-Wave hub and can be viewed via your smart home app. You can configure notifications to alert you when a specific entry point changes status.

4.2. Мерење на температурата

The integrated temperature sensor reports the ambient temperature of its location. This data can be used for various smart home automations, such as adjusting thermostats or triggering alerts if temperatures fall outside a desired range.

4.3. Тamper Откривање

The sensor includes a built-in tamper sensor. If the sensor casing is opened or removed from its mounting surface, an alert can be sent to your Z-Wave hub, providing an additional layer of security.

4.4. Scene Activation

Through your Z-Wave hub, you can create automated scenes based on the sensor's status. For exampле:

• Turn on lights when a door opens.
• Adjust heating/cooling when a window is left open.
• Trigger an alarm if a door or window opens while the security system is armed.

5. Одржување

5.1. Замена на батеријата

The FIBARO Door/Window Sensor 2 is powered by a CR123A battery, which typically lasts up to 24 months. When the battery level is low, your Z-Wave hub should report this status. To replace the battery:

1. Carefully detach the sensor unit from its mounting surface.
2. Отворете го сензорот casing.
3. Отстранете ја старата батерија CR123A.
4. Вметнете нова батерија CR123A, внимавајќи на правилниот поларитет.
5. Затворете го вasing and reattach the sensor to its mounting surface.

Забелешка: Фрлете ги искористените батерии според локалните прописи.

6 Смена на проблеми

If you encounter issues with your FIBARO Door/Window Sensor 2, consider the following common solutions:

• Sensor not reporting status:
  • Check the battery level in your Z-Wave app. Replace the battery if low.
  • Ensure the sensor and magnet are properly aligned and within close proximity when the door/window is closed.
  • Verify the sensor is still paired with your Z-Wave hub. If not, attempt to re-pair it.
  • Check the distance between the sensor and the Z-Wave hub. Z-Wave signals can be affected by obstacles.
• Лепилото не држи:
  • Ensure the mounting surface was clean and dry before application.
  • For rough or uneven surfaces, or if the original adhesive fails, use a stronger double-sided tape or consider alternative mounting methods if available.
• Flaky tamper прекинувач:
  • Ensure the sensor casing is closed correctly and the internal tamper button is fully depressed.
  • Ако проблемот продолжи, контактирајте ја поддршката.
• Sensor not working with specific hub (e.g., Nexia):
  • While the product is generally compatible with many Z-Wave hubs, specific integrations can vary. Ensure your hub's firmware is up to date.
  • Perform a factory reset on the sensor (refer to the sensor's specific manual for the reset procedure, which often involves holding tamper buttons while inserting the battery). Then attempt re-pairing.
  • Consult the support resources for your specific Z-Wave hub or FIBARO for detailed compatibility and integration guides.

7. Спецификации

8. Гаранција и поддршка

8.1. Информации за гаранцијата

The FIBARO Door/Window Sensor 2 comes with a 1-year warranty. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation provided with your product or visit the official FIBARO webсајт.

8.2. Поддршка за корисници

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact FIBARO customer support. Contact details can typically be found on the FIBARO official webлокацијата или во пакувањето на производот.