Automatic Mini Double Station Mug Heat Press Transfer Machine User Manual

1. Вовед

This manual provides essential instructions for the safe and efficient operation of your Automatic Mini Double Station Mug Heat Press Transfer Machine. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance.

This machine is designed for sublimation printing on various mug sizes, featuring a double station design for increased efficiency.

2. Инструкции за безбедност

• Секогаш работете со машината на стабилна, отпорна на топлина површина.
• Keep hands clear of heating elements during operation to prevent burns.
• Обезбедете соодветна вентилација во работната површина.
• Не ја изложувајте машината на вода или прекумерна влага.
• Исклучете ја машината од штекер кога не е во употреба или пред чистење/одржување.
• Не обидувајте се сами да ја модифицирате или поправате машината. Контактирајте квалификуван персонал за сервис.
• Држете ги децата и домашните миленици подалеку од машината што работи.

3. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• 1x Double Mug Heat Press Machine
• 1x Англиски упатство за употреба (овој документ)
• 2x 11oz Heating Pads (pre-installed or included separately)

Доколку недостасуваат или се оштетени некои предмети, ве молиме контактирајте ја службата за корисници.

4. Поставување

1. Отпакување: Carefully remove the heat press machine from its packaging. Retain packaging for future storage or transport.
2. Поставување: Place the machine on a flat, stable, and heat-resistant surface. Ensure there is adequate space around the machine for ventilation and safe operation.
3. Поврзување за напојување: Ensure the machine's power switch is in the OFF position. Plug the machine into a standard 110V AC power outlet.
4. Првична проверка: Before first use, inspect the heating pads and control panel for any visible damage.

Слика 1: Предна страна view of the Double Mug Heat Press Machine. This image shows the overall design with two mug stations and the central control panel.

5. Упатства за работа

5.1 Контролната табла е завршенаview

Figure 2: Close-up of the LCD control panel. The panel features an LCD display for temperature and time, along with buttons for timing, temperature adjustment, and mode selection for left and right stations.

The machine features an LCD control panel for setting temperature and time. It allows for independent control of each mug station.

5.2 Основни чекори за работа

1. Вклучување: Turn on the main power switch. The LCD display will illuminate.
2. Поставете температура: Use the temperature adjustment buttons (often indicated by '+' and '-' or specific temperature setting buttons) to set the desired transfer temperature. The recommended transfer temperature is 180°C (356°F).
3. Поставете време: Use the timing adjustment buttons to set the desired transfer time. The recommended transfer time is 90 seconds.
4. Загрејте: Allow the machine to preheat until it reaches the set temperature. The display will show the current temperature.
5. Подгответе шолја: Wrap your sublimation print around the mug, securing it with heat-resistant tape. Ensure the print is flat against the mug surface.
6. Insert Mug: Carefully place the prepared mug into the heating pad of one or both stations. Ensure the mug is centered and the heating pad fully encompasses the printed area.
7. Применете притисок: Затворете го clamp handle to apply even pressure to the mug. The machine is designed to accommodate various mug sizes (6OZ, 9OZ, 11OZ, 12OZ, 17OZ) with appropriate heating pads.
8. Започни пренос: Press the start button (often labeled 'Timing' or 'Start') for the respective station. The timer will begin counting down.
9. Remove Mug: Once the timer reaches zero, carefully open the clamp handle and remove the hot mug using heat-resistant gloves.
10. Олади: Place the mug on a heat-resistant surface to cool. Once cool, carefully remove the sublimation paper.

Figure 3: A mug correctly positioned within the heating element of the heat press machine, ready for the sublimation process.

5.3 Workflow Diagram

Figure 4: A visual representation of the sublimation printing process, from designing and printing the image to pressing it onto the mug and the final result.

5.4 Replacing Heating Pads

The heating pads are replaceable to accommodate different mug sizes. The machine includes two 11oz heating pads. For other sizes, contact customer support.

Слика 5: Детален view of the heating element, showing its construction and how it secures the mug for heat transfer.

1. Исклучување и исклучување: Ensure the machine is turned off and unplugged from the power source. Allow the heating pads to cool completely.
2. Олабавете ги прицврстувачите: Locate the fasteners securing the heating pad to the machine frame. Loosen or remove them as required.
3. Disconnect Pad: Carefully disconnect the electrical connector for the heating pad.
4. Отстранете ја старата подлога: Slide out the old heating pad.
5. Инсталирајте нова подлога: Insert the new heating pad, ensuring it is correctly aligned.
6. Поврзете се и осигурајте се: Reconnect the electrical connector and secure the heating pad with the fasteners.
7. Тест: Plug in the machine and perform a test run to ensure the new heating pad functions correctly.

6. Одржување

• Чистење: After each use, ensure the machine is cool and unplugged. Wipe down the exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Heating Pad Care: Inspect heating pads regularly for wear or damage. Replace if necessary to ensure consistent heat transfer.
• Складирање: Чувајте ја машината во сува средина без прашина кога не ја користите.

7 Смена на проблеми

8. Спецификации

9. Гаранција и поддршка

No specific warranty information is provided with this product. For technical support, replacement parts (such as different sized heating pads), or any operational questions, please refer to the seller or manufacturer's contact information provided at the point of purchase.