1. Вовед
Thank you for choosing the Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Инструкции за безбедност
- Електрична безбедност: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
- Употреба на отворено: This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and against splashing water from any direction. It is designed for outdoor use only.
- Тип на сијалица: Use only R7s halogen bulbs with a maximum wattage of 150W. Exceeding the maximum wattage can cause overheating and damage to the fixture or create a fire hazard.
- Ракување: Do not touch the halogen bulb with bare hands during installation or replacement, as oils from your skin can cause premature failure. Use a clean cloth or gloves.
- Монтирање: Уверете се дека површината за монтирање е структурно цврста и може да ја издржи тежината на арматурата.
3. Содржина на пакетот
Проверете дали сите компоненти се присутни и неоштетени:
- Brilliant Tanko 96162/06 Outdoor Wall Light Unit with Motion Sensor
- Монтажни материјали (завртки, ѕидни приклучоци)
- Упатство за употреба (овој документ)
Note: R7s bulb is typically not included and must be purchased separately.
4. Поставување и инсталација
Пред да започнете: Осигурајте се дека напојувањето до просторијата за инсталација е исклучено кај главниот прекинувач.
- Подгответе ја површината за монтирање: Choose a suitable wall location for the fixture. Mark the drilling points for the mounting bracket.
- Монтирајте го држачот: Drill holes at the marked points and insert the wall plugs. Secure the mounting bracket to the wall using the provided screws.
- Жици: Connect the electrical supply wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. Secure all connections tightly.
- Инсталирајте ја сијалицата: Carefully insert an R7s halogen bulb (max 150W) into the bulb holder. Avoid touching the glass part of the bulb with bare hands.
- Прикачете го прицврстувачот: Secure the main light unit to the mounted bracket. Ensure it is firmly attached and sealed against the wall to maintain its IP44 rating.
- Adjust Sensor and Light Head: The motion sensor and light head are adjustable. Position them to cover the desired detection area and illumination direction.
Figure 4.1: Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This image shows the complete fixture, including the main light housing and the adjustable motion sensor unit mounted below it.
Слика 4.2: Одблиску view of the R7s bulb socket within the Brilliant Tanko fixture. This illustrates where the R7s halogen bulb should be inserted.
5. Упатства за работа
Once installed and power is restored, the Brilliant Tanko 96162/06 will operate as follows:
- Откривање на движење: The integrated motion sensor detects movement within its adjustable range. When motion is detected, the light will automatically turn on.
- Времетраење на светлината: The light will remain on for a set period after motion is detected. This duration is typically adjustable via controls on the sensor unit (refer to specific markings on your sensor for adjustment dials for 'TIME' and 'LUX' settings, if present).
- Ambient Light Sensor (LUX): The sensor also includes an ambient light sensor. This prevents the light from activating during daylight hours, saving energy. The sensitivity of this sensor can often be adjusted to determine at what level of darkness the motion sensor becomes active.
6. Одржување
- Чистење: За чистење на апаратот, проверете дали струјата е исклучена. Избришете со мека,amp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or sensor.
- Замена на сијалицата: Always disconnect power before replacing the bulb. Allow the old bulb to cool completely. Carefully remove the old R7s bulb and insert a new R7s bulb (max 150W), avoiding direct contact with the glass.
- Инспекција: Периодично проверувајте го апаратот за какви било знаци на оштетување, лабави врски или абење. Доколку се пронајдат какви било проблеми, исклучете го напојувањето и консултирајте се со квалификуван електричар.
7 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Светлото не се вклучува. | No power supply. Blown bulb. Faulty wiring. Ambient light too high. | Check circuit breaker. Replace bulb. Verify wiring connections (consult electrician). Adjust LUX setting on sensor. |
| Светлината останува постојано вклучена. | Continuous motion detected. Sensor faulty. Wiring error. | Adjust sensor angle/sensitivity. Check for obstructions. Consult electrician. |
| Светлото се пали случајно. | Sensor too sensitive. Environmental factors (wind, animals). | Reduce sensor sensitivity. Re-position sensor to avoid unwanted triggers. |
| Светлината трепери. | Loose bulb. Incorrect bulb type. Power fluctuations. | Ensure bulb is seated correctly. Verify R7s 150W bulb. Consult electrician for power issues. |
8. Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | Брилијантно |
| Број на модел | 96162/06 |
| Димензии на производот (Д x Ш x В) | 14 x 21 x 22 cm |
| Тежина на ставката | 521 грама |
| Оценка за IP | IP44 |
| Стил | Модерен |
| Боја | Црното |
| Материјал | Метал, стакло |
| Број на светилки | 1 |
| Voltage | 230 волти |
| Специфична употреба | Употреба само на отворено |
| Посебни карактеристики | Adjustable (sensor/light head) |
| Тип на капа | R7 -тите |
| Макс Ватtage | 150 W |
| Извор на енергија | Electrical Cable (Wired) |
| Тип на инсталација | Монтирање на ѕид |
| Етикета за енергија | A+ to E (for compatible bulbs) |
Figure 8.1: Energy label for the Brilliant Tanko 96162/06, indicating compatibility with bulbs from energy classes A++ to E.
9. Гаранција и поддршка
Information regarding specific warranty terms and spare parts availability for the Brilliant Tanko 96162/06 is not provided in the product data. For warranty claims, technical support, or inquiries about spare parts, please contact the retailer where you purchased the product or the manufacturer directly. Always have your proof of purchase and model number (96162/06) available when contacting support.
