1. Вовед
The ATEN VE8950T is a 4K HDMI Over IP Transmitter designed for extending 4K audio/video signals over a standard Gigabit Ethernet network. This device delivers visually lossless 4K AV signals with low latency, making it suitable for long-distance transmission in various professional environments. Its design focuses on ease of setup and operation, providing a scalable and flexible solution for multi-display 4K signal distribution.
The VE8950T offers an economical digital signage solution, addressing common challenges in AV over IP system implementation. Key benefits include limitless scalability, flexible deployment, simplified IP setup without the need for additional server PCs or software, and support for daisy-chaining to extend reach efficiently.
2. Клучни карактеристики
- 4K HDMI Over IP Extender: Functions as a transmitter for extending HDMI signals over an IP network.
- Висококвалитетен видео пренос: Supports visually lossless video up to 4K at 60 Hz (4:2:0) and 4K at 30 Hz (4:4:4).
- Напредна видео компресија: Utilizes ATEN's advanced video lossless compression technology for stunning video quality.
- EDID Expert Technology: Automatically selects optimal EDID settings for smooth power-up, high-quality display, and best video resolution across various screens.
- Flexible AV Connections: Extends AV connections from simple point-to-point to complex multi-point to multi-point setups via LAN, without distance limitations.
3. Опис на хардверот
3.1. Преден панел
Слика 1: Front Panel of the ATEN VE8950T Transmitter.
- HDMI ВО: Се поврзува со HDMI изворниот уред.
- АУДИО ВО: 3.5 милиметарски приклучок за аналоген аудио влез.
- IR: 3.5mm jack for IR receiver connection.
- РС-232: Serial port for control and configuration.
- USB: USB Type B port for connecting to a computer or other USB host device.
3.2. Заден панел
Слика 2: Rear Panel of the ATEN VE8950T Transmitter.
- LAN: RJ-45 Ethernet port for network connection.
- DC5V: Power input jack for the 5V DC power adapter.
3.3. Топ панел
Слика 3: Top Panel of the ATEN VE8950T Transmitter.
- ID NUMBER Display: Three-digit LED display showing the device's ID.
- +/- Копчиња: Used to adjust the device ID or navigate menu options.
- ЛИНК LED: Indicates network link status.
- LED напојување: Покажува статус на моќност.
4. Поставување и инсталација
Follow these steps to set up your ATEN VE8950T Transmitter:
- Уреди за исклучување: Ensure all devices, including the HDMI source, display, and the VE8950T, are powered off before making any connections.
- Поврзете HDMI извор: Use an HDMI cable to connect your HDMI source device (e.g., Blu-ray player, PC) to the HDMI ВО port on the VE8950T Transmitter.
- Мрежна конекција: Connect an Ethernet cable from your Gigabit network switch to the LAN port on the VE8950T Transmitter. Ensure the network switch supports Gigabit speeds.
- Поврзување за напојување: Поврзете го испорачаниот адаптер за напојување од 5V DC со DC5V port on the VE8950T Transmitter, then plug the adapter into a power outlet.
- Вклучување: Power on the VE8950T Transmitter. The МОЌ LED should illuminate.
- Configure ID (Optional): If using multiple transmitters and receivers, configure the unique ID for each transmitter using the +/- buttons on the top panel. This ID must match the ID set on the corresponding receiver(s).
- Connect Receiver (Sold Separately): For a complete system, connect a compatible ATEN VE8950R Receiver (sold separately) to your display and the same network.
- Power On Source and Display: Power on your HDMI source device and the display.
For advanced configurations, including web GUI management and video wall setups, refer to the comprehensive user manual available on the ATEN webсајт.
5. Операција
Once the VE8950T Transmitter and its corresponding receiver(s) are properly connected and powered on, the system will automatically begin transmitting the HDMI signal over the IP network.
- Пренос на сигнал: The HDMI video and audio from the source connected to the VE8950T will be extended to the display connected to the receiver.
- Индикатори за статусот: Внимавајте на ЛИНК и МОЌ LEDs on the top panel. The POWER LED should be solid, and the LINK LED should indicate active network connection and data transmission.
- Web GUI Management: The VE8950T supports management via a web-based Graphical User Interface (GUI). Access the web GUI by entering the device's IP address into a web browser on a computer connected to the same network. The web GUI allows for advanced configuration, monitoring, and control, including video wall setup and firmware updates.
- Контрола RS-232: The RS-232 port can be used for serial control from a control system. Refer to the detailed product manual for RS-232 command protocols.
- IR контрола: If an IR receiver is connected, you can extend IR remote control signals from the display location back to the source device.
6. Одржување
To ensure optimal performance and longevity of your ATEN VE8950T Transmitter, follow these maintenance guidelines:
- Чистење: Користете мека, сува крпа за чистење на уредот. Не користете течни или аеросолни средства за чистење.
- Вентилација: Обезбедете соодветна вентилација околу уредот за да спречите прегревање. Не блокирајте ги отворите за вентилација.
- Животна средина: Operate the device within the specified temperature and humidity ranges. Avoid exposing it to direct sunlight, excessive dust, or moisture.
- Ажурирања на фирмверот: Периодично проверувајте го ATEN website for firmware updates. Keeping the firmware up-to-date can improve performance, add new features, and resolve potential issues.
- Управување со кабли: Осигурајте се дека сите кабли се безбедно поврзани и правилно насочени за да спречите случајно исклучување или оштетување.
7 Смена на проблеми
If you encounter issues with your ATEN VE8950T Transmitter, refer to the following troubleshooting tips:
| Проблем | Можна причина | Решение |
|---|---|---|
| Нема видео излез на екранот. |
|
|
| Лош квалитет на видео или треперење. |
|
|
| Не може да се пристапи Web GUI. |
|
|
If the problem persists, please contact ATEN technical support for further assistance.
8. Спецификации
| Број на модел | VE8950T |
| Технологија за поврзување | HDMI, Ethernet (IP) |
| Видео кодирање | H.265 |
| Макс. Резолуција | 4K (3840 x 2160) @ 60Hz (4:2:0), 4K (3840 x 2160) @ 30Hz (4:4:4) |
| Режим за излез на звук | Стерео, Опкружувачки звук |
| Сараунд звук | 5.1 Конфигурација на каналот |
| Вкупно HDMI порти | 1 (Влез) |
| Контролен метод | Remote (IR), RS-232, Web GUI |
| Димензии на производот | 9.5 x 6.5 x 6.3 инчи |
| Тежина на ставката | 10.14 фунти |
9. Гаранција и поддршка
ATEN is committed to providing high-quality products and excellent customer service. For support regarding your VE8950T Transmitter, please refer to the following:
- Техничка поддршка: ATEN offers free technical support. For assistance, please contact ATEN's support team. They aim to respond to customer inquiries within 4 hours.
- Гарантен сервис: Information regarding standard warranty coverage and extended warranty service packages can be found on the official ATEN webсајт или со контактирање на службата за корисници.
- Услуга RMA: ATEN provides localized repair centers for Return Merchandise Authorization (RMA) services.
- Онлајн ресурси: Visit the official ATEN website for product documentation, FAQs, driver downloads, and firmware updates.
For the most current and detailed warranty information, please visit the ATEN Official Store или нивните корпоративни webсајт.
