Aerocool Cylon RGB Midi-Tower PC Case - ACCM-PV10012.11 User Manual

1. Во текотview

The Aerocool Cylon RGB Midi-Tower PC Case, model ACCM-PV10012.11, is designed to house computer components, offering both functionality and aesthetic appeal. It features a side window panel for showcasing internal hardware and an RGB LED illumination strip on the front panel for customizable lighting effects. This case supports ATX motherboards and provides ample space for various components, including multiple storage drives and cooling solutions.

Слика 1: Предна страна view of the Aerocool Cylon RGB Midi-Tower PC Case, highlighting its distinctive RGB LED strip.

2. Содржина на пакетот

Ве молиме проверете дали сите артикли се присутни во пакетот:

• Aerocool Cylon RGB Midi-Tower PC Case (ACCM-PV10012.11)
• Кутија со додатоци (содржи завртки, држачи, врвки за кабел итн.)
• Упатство за употреба (овој документ)

3. Информации за безбедност

Read and understand all safety instructions before installing or operating the PC case. Failure to do so may result in injury or damage to the product.

• Секогаш исклучувајте го напојувањето од ѕидниот штекер пред да вршите каква било инсталација или одржување.
• Handle all components with care to prevent damage.
• Avoid touching electronic components directly; use anti-static precautions if possible.
• Чувајте ги малите делови и додатоците подалеку од дофат на деца.
• Обезбедете соодветна вентилација околу куќиштето за да спречите прегревање.

4. Поставување и инсталација

4.1 Подготовка на случајот

Before installing components, remove the side panels to access the interior of the case.

1. Поставете го куќиштето на рамна, стабилна површина.
2. Locate the thumbscrews on the rear of the case securing the side panel.
3. Unscrew the thumbscrews and carefully slide the side panel backward, then lift it off. Repeat for the other side panel if necessary.

Figure 2: Left image shows the side panel attached, right image shows the side panel removed for access.

4.2 Инсталација на матична плоча

The Aerocool Cylon case supports ATX motherboards.

1. Install the I/O shield that came with your motherboard into the opening at the rear of the case.
2. Ensure motherboard standoffs are correctly aligned with your motherboard's screw holes. Install any missing standoffs from the accessory box.
3. Внимателно поставете ја матичната плоча на држачите, порамнувајќи ги дупките за завртките.
4. Прицврстете ја матичната плоча со соодветните завртки од кутијата со додатоци.

4.3 Drive Installation (2.5" / 3.5")

The case provides bays for 2.5-inch and 3.5-inch drives.

1. Locate the drive bays within the case. Refer to the case diagram for specific locations.
2. For 3.5-inch HDDs, slide the drive into the designated tray or bay and secure it with screws.
3. For 2.5-inch SSDs, mount the drive onto the designated bracket or tray and secure it with screws.

4.4 Инсталација на единицата за напојување (PSU).

The PSU is typically mounted at the bottom rear of the case.

1. Slide the PSU into its designated compartment from the rear of the case.
2. Align the PSU's screw holes with those on the case.
3. Secure the PSU with the provided screws.

4.5 Инсталација на картичка за проширување (GPU)

Install your graphics card or other expansion cards into the PCIe slots.

1. Remove the necessary PCI-E slot covers from the rear of the case corresponding to your expansion card's size.
2. Carefully insert the expansion card into the appropriate PCI-E slot on the motherboard until it clicks into place.
3. Secure the expansion card with screws.

Слика 3: Заден дел view of the PC case, showing the expansion slots and I/O area.

4.6 Fan / Liquid Cooling Radiator Installation

The Aerocool Cylon case supports various cooling configurations.

• Заден дел: 1 x 120mm fan (pre-installed or optional).
• Врв: Supports 2 x 120mm fans or 1 x 240mm radiator.
• Долу: Supports 2 x 120mm fans.

1. Mount fans or radiators to their respective positions using the appropriate screws.
2. Connect fan power cables to the motherboard or a fan controller.

Figure 4: An interior shot of the case, illustrating potential fan and liquid cooling radiator placements.

4.7 Управување со кабли

Effective cable management improves airflow and aesthetics.

• Route cables through the cutouts and behind the motherboard tray.
• Use cable ties (included in the accessory box) to bundle and secure cables.

4.8 Connecting Front Panel I/O

Connect the front panel cables to the corresponding headers on your motherboard.

• USB 3.0: Поврзете го USB 3.0 кабелот со USB 3.0 конекторот на матичната плоча.
• USB 2.0: Connect the USB 2.0 cables (x2) to the motherboard's USB 2.0 headers.
• HD аудио: Поврзете го HD аудио кабелот со аудио конекторот на матичната плоча.
• Напојување/Ресетирање/LED диоди: Connect the small individual cables (Power SW, Reset SW, HDD LED, Power LED) to the motherboard's front panel headers according to your motherboard manual.

5. Ракување со куќиштето на компјутерот

Once all components are installed and connected, reattach the side panels and power on your system.

• Вклучување: Press the power button located on the top I/O panel of the case.
• Контрола на RGB осветлување: The front panel RGB LED illumination can be controlled via a dedicated button on the top I/O panel or through compatible motherboard software, depending on your setup. Refer to your motherboard manual for software control options.

6. Одржување

Редовното одржување помага да се обезбедат оптимални перформанси и долготрајност на куќиштето и компонентите на вашиот компјутер.

• Чистење на филтерот за прашина: The case features dust filters (e.g., on the top and bottom). Regularly remove and clean these filters to prevent dust buildup and maintain good airflow. Use compressed air or a soft brush.
• Општо чистење: Користете мека, гamp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For the transparent side panel, use a microfiber cloth to prevent scratches.

7 Смена на проблеми

Доколку наидете на проблеми, разгледајте ги следниве вообичаени чекори за решавање проблеми:

• Без моќност: Ensure the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position. Verify all power cables to the motherboard and components are securely seated.
• Вентилаторите не се вртат: Check that all fan cables are correctly connected to the motherboard or fan controller. Ensure the system is receiving power.
• RGB не работи: Confirm RGB cables are properly connected. If using motherboard software, ensure it is installed and configured correctly.
• Лабави врски: Recheck all internal connections (power, data, front panel I/O) to ensure they are firmly seated.

8. Спецификации

9. Информации за гаранцијата

The Aerocool Cylon RGB Midi-Tower PC Case is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official AeroCool website for detailed warranty terms and conditions, including coverage period and claim procedures.

10. Поддршка

For further assistance, technical support, or to download the latest drivers and software, please visit the official AeroCool webсајт:

Webсајт: www.aerocool.io

You may also contact AeroCool customer service through the contact information provided on their webсајт.