StarTech.com RKCONS1901

StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

Модел: RKCONS1901 | Бренд: StarTech.com

1. Вовед

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. Што има во кутијата

  • KVM конзола
  • 6 ft [1.8 m] KVM cable
  • М5 навртки за кафез
  • М5 завртки

3. Поставување и инсталација

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 Монтирање на решетка

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

  1. Slide the KVM console into the desired 1U rack space.
  2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
StarTech.com RKCONS1901 KVM Console in closed position, ready for rack mounting.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 Кабли за поврзување

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

  1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
  2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
  3. Connect the power cable to the KVM console and a power outlet.
Заден дел view of the StarTech.com RKCONS1901 KVM Console showing VGA, USB, and power ports.

Слика 2: Заден дел view of the KVM Console with connection ports.

3.3 Видео референца за инсталација

For a visual guide on the installation process, refer to the following video:

Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.

4. Упатства за работа

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

  1. To open the console, pull the handle to slide the drawer out of the rack.
  2. Lift the LCD panel to an upright position.
  3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
StarTech.com RKCONS1901 KVM Console in open position, showing the 19-inch LCD monitor, keyboard, and touchpad.

Figure 3: KVM Console in open position, ready for use.

4.2 Користење на тастатурата и тачпедот

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 Навигација на менито на екранот

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.

5. Одржување

To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:

  • Чистење: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
  • Вентилација: Ensure proper airflow around the console. Do not block ventilation openings.
  • Управување со кабли: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
  • Еколошки услови: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6 Смена на проблеми

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

  • Нема приказ: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
  • Тастатурата/глушецот не реагираат: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
  • Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
  • Incorrect Display Resolution: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. Спецификации

КарактеристикаСпецификација
Број на моделRKCONS1901
БрендStarTech.com
Висина на решетката1U
Големина на приказ19 инчи
Тип на дисплејActive Matrix TFT LCD
Макс резолуција1280x1024
Тастатура99-key full keyboard with numeric keypad
Уред за покажувањеПодлога за допир
Интерфејс за видеоVGA
USB поддршкаДа
Работна температура0 to 40 Degrees Celsius
MTBF50,000 часа
Димензии на производот (ДxШxВ)21 x 19 x 1.7 инчи
Тежина на ставката26.8 фунти

8. Гаранција и поддршка

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com webлокација или директно контактирајте ја нивната служба за корисници. Зачувајте ја сметката за купување за гаранциски барања.

Поврзани документи - RKCONS1901

Предview StarTech.com 4/8/16 портен 1U VGA USB KVM прекинувач за монтирање на решетка со OSD - Упатство за користење
Детално упатство за корисникот за StarTech.com 4/8/16 портен 1U VGA USB KVM прекинувач со OSD (модели SV431DUSBU, SV831DUSBU, SV1631DUSBU). Дознајте повеќе за инсталацијата, работата, карактеристиките на OSD, спецификациите и техничката поддршка.
Предview StarTech.com 8-портен KVM прекинувач за монтирање на рачки - 4K 60Hz Упатство за користење
Упатство за корисникот за 8-портен KVM прекинувач за монтирање на Rack на StarTech.com R8AD122-KVM-SWITCH / R8AH202-KVM-SWITCH. Обезбедува детални упатства за инсталација, поврзување на конзоли и компјутери и користење на команди со кратенки за 4K 60Hz работа.
Предview StarTech.com 4/8/16 портен 1U USB VGA KVM прекинувач за монтирање на решетка со OSD упатство за користење
Ова упатство за користење дава детални информации за StarTech.com 4/8/16 портен 1U USB VGA KVM прекинувач за монтирање на решетка со OSD, вклучувајќи инсталација, работа, спецификации и техничка поддршка.
Предview StarTech.com SV441DUSBI / SV841DUSBI 4/8-Port Enhanced Digital USB KVM Switch Over IP with File Упатство за корисникот за пренос
User manual for the StarTech.com SV441DUSBI and SV841DUSBI 4/8-Port Enhanced Digital USB KVM Switch Over IP with File Transfer. Learn about installation, configuration, operation, remote management, and troubleshooting.
Предview StarTech.com SV231DVIUDDM & SV431DVIUDDM: 2 & 4 Port DVI USB KVM Switch User Manual
User manual for StarTech.com SV231DVIUDDM (2-port) and SV431DVIUDDM (4-port) DVI USB KVM Switches with DDM. Covers installation, operation, specifications, hot-key functions, technical support, and warranty information.
Предview StarTech.com ADJSHELFHD/ADJSHELFHDV 1U Adjustable High Load Fixed Rackmount Shelf - Installation and Specifications
Learn how to install and use the StarTech.com ADJSHELFHD and ADJSHELFHDV 1U adjustable high load fixed rackmount shelves. This guide covers installation steps, included accessories, and technical specifications for these durable server rack shelves.