Вовед
This manual provides essential information for the safe and proper assembly, use, and maintenance of your Graco Benton 4-in-1 Convertible Crib and Changer. Please read all instructions carefully before assembly and retain this manual for future reference. This product is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed with headboard.

Image: The Graco Benton 4-in-1 Convertible Crib and Changer in black, showcasing its crib and attached changing table configuration.
Информации за безбедност
Your child's safety is paramount. Always follow these guidelines:
- Прочитајте ги сите упатства: Ensure you understand all assembly and usage instructions before using the product.
- Редовна инспекција: Periodically check all screws, bolts, and fasteners to ensure they are tight and secure. Do not use the crib if any parts are missing, damaged, or broken.
- Mattress Safety: Use only a mattress that is at least 27 1/4 inches (69 cm) by 51 5/8 inches (131 cm) with a thickness not exceeding 6 inches (15 cm). The mattress must fit snugly without gaps.
- Child Height Limit: Discontinue use of the crib when your child begins to climb out or reaches 35 inches (89 cm) in height.
- Changing Table Safety: Always use the safety strap provided with the changing pad. Never leave a child unattended on the changing table.
- Опасност од гушење: Keep small parts, plastic bags, and packaging materials away from children.
- Сертификати: This product is GREENGUARD Gold Certified, screened for over 10,000 chemicals and VOCs, and JPMA Certified, meeting or exceeding all applicable safety standards.

Image: The Graco Benton Crib and Changer with a GREENGUARD Gold Certified badge, indicating low chemical emissions.
Список на компоненти
Before assembly, ensure all components are present. Refer to the detailed parts list in your product packaging for specific hardware. Key components include:
- Crib side rails (front, back, left, right)
- Crib mattress support base
- Changing table frame
- Changing pad with safety strap
- Drawer components (3 drawers)
- Shelf components (2 open shelves)
- Hardware pack (screws, bolts, barrel nuts, Allen wrench)

Image: A diagram illustrating the key features of the crib and changer, including the adjustable mattress support, attached changing table, drawers, and shelves.
Поставување
Assembly is required. Follow the step-by-step instructions provided in the separate assembly guide included with your product. A general overview of the setup process is as follows:
- Отпакувајте ги компонентите: Внимателно отстранете ги сите делови од пакувањето и проверете ги според списокот на компоненти.
- Составете ја рамката за креветчето: Прикачете ги страничните шини на таблата за глава и подножјето на креветот користејќи го приложениот хардвер.
- Инсталација на потпора за душек: Secure the mattress support base at the desired height. There are three adjustable height options.
- Assemble Changing Table: Construct the changing table frame, including the drawers and open shelves.
- Attach Changing Table: Securely attach the assembled changing table to the crib frame.
- Install Changing Pad: Place the water-resistant changing pad on the changing table and secure it with the safety strap.
For detailed visual instructions, please refer to the assembly diagrams in your product's dedicated assembly manual.
Упатства за работа
Crib Use
Place your child in the crib on their back. Ensure the mattress is firm and fits snugly. Adjust the mattress support base to the appropriate height for your child's developmental stage. The highest position is for infants, and lower positions are for older babies who can sit or stand.
Changing Table Use
Always use the changing pad with the safety strap. Place your child on the changing pad and secure the safety strap around them. Keep all necessary changing supplies within reach but away from the child. Never leave your child unattended on the changing table.

Image: A close-up of the attached changing table, showing the water-resistant changing pad and the integrated safety strap.
Конверзии
The Graco Benton 4-in-1 Crib and Changer converts to a toddler bed, daybed, and full-size bed. Conversion kits and mattresses are sold separately.
- Кревет за мало дете: Remove the front crib rail and install the Graco Toddler Guardrail (sold separately).
- Детска постела: Remove the front crib rail. No guardrail is used for the daybed configuration.
- Full-Size Bed: Remove all crib rails and the changing table. Attach the headboard to a Graco Full-Size Conversion Kit (sold separately) and a standard full-size mattress.

Image: A visual representation of the four conversion stages: crib, toddler bed, daybed, and full-size bed with headboard.
Одржување
To maintain the quality and safety of your Graco Benton Crib and Changer:
- Чистење: Избришете ги површините со рекламаamp крпа. Избегнувајте абразивни средства за чистење или силни хемикалии кои би можеле да ја оштетат завршната обработка или материјалите.
- Складирање: If storing the product, do so in a dry, temperature-controlled environment to prevent warping or damage.
- Хардвер: Periodically check all hardware for tightness. Loose hardware can lead to instability and safety hazards.
Решавање проблеми
If you encounter issues with your Graco Benton Crib and Changer, consider the following:
- Неиздржлива структура: Ensure all bolts and screws are fully tightened. Re-check assembly steps to confirm correct part placement.
- Фиоките не се лизгаат непречено: Verify that the Euro drawer glides are correctly installed and free from obstructions. Ensure drawers are not overloaded.
- Difficulty with Conversions: Refer to the specific conversion instructions provided with the optional conversion kits. Ensure all necessary parts are acquired.
- Делови што недостасуваат: If any parts are missing upon unboxing, contact customer support immediately. Do not attempt to substitute parts.
Спецификации
| Карактеристика | Детал |
|---|---|
| Број на модел | 04586-64Б |
| Боја | Црното |
| Димензии на производот (Д x Ш x В) | 73.2" x 29.8" x 41.7" |
| Тежина на ставката | 98 фунти |
| Материјал | Борово дрво, инженерско дрво и дрвени композити |
| Maximum Child Height (Crib Stage) | 35 инчи (89 см) |
| Maximum Weight (Toddler/Daybed) | 50 фунти |
| Сертификати | GREENGUARD златен сертифициран, JPMA сертифициран |
| UPC | 081877503177 |

Image: A diagram illustrating the overall dimensions of the Graco Benton Crib and Changer.
Официјално видео за производот
Video: An official video from Storkcraft, the manufacturer of Graco products, highlighting the brand's commitment to supporting parents and providing safe, reliable baby products. This video showcases various Graco products and the design philosophy behind them.
Гаранција и поддршка
Кабриолетот креветче Graco Benton 4-во-1 со менувач е поддржан од 1-годишна ограничена гаранција против производствени дефекти. Ве молиме зачувајте го доказот за купување за гаранциски барања.
For customer support, missing parts, or further assistance, please contact Storkcraft Customer Service:
- Webсајт: Посетете го Storkcraft Brand Store за контакт информации и често поставувани прашања.
- Телефон: Refer to the contact details provided in your product packaging or on the official Storkcraft webсајт.
When contacting support, please have your model number (04586-64B) and date of purchase readily available.




