1. Вовед
This manual provides essential instructions for the proper setup, operation, and maintenance of your ARREGUI Premier 16501-S1 Electronic Combination Lock Safe. Please read this document thoroughly before using the safe to ensure correct functionality and security. Keep this manual for future reference.
Слика 1.1: напред view of the ARREGUI Premier 16501-S1 Electronic Combination Lock Safe, showcasing the keypad and locking mechanism.
2. Информации за безбедност
- Клучеви за итни случаи: Never store the emergency keys inside the safe. Keep them in a secure, separate location known only to trusted individuals.
- Закотвување: While not mandatory, anchoring the safe to a wall or floor is highly recommended to prevent unauthorized removal and enhance security.
- Тип на батерија: Use only 4 AA 1.5V alkaline batteries. Do not mix old and new batteries or different battery types.
- Еколошки услови: Avoid exposing the safe to extreme temperatures, high humidity, or direct water contact, as it is not water-resistant.
3. Содржина на пакетот
При распакување, проверете дали се вклучени сите од следниве елементи:
- ARREGUI Premier 16501-S1 Safe Unit
- Упатство за употреба (овој документ)
- 2 клучеви за итни случаи
- Mounting Material (screws for anchoring)
4. Поставување
4.1. Инсталација на батерија
- Locate the battery compartment, typically found on the inside of the safe door.
- Отворете го капакот на батеријата.
- Insert 4 new AA 1.5V alkaline batteries, ensuring correct polarity (+/-).
- Добро затворете го капакот на батеријата.
The keypad should briefly illuminate, indicating successful battery installation.
4.2. Initial Code Setting
The specific procedure for setting the initial code may vary slightly. Please refer to the detailed instructions provided in the physical manual included with your safe. Generally, the process involves:
- With the safe door open, locate the red or green reset button on the inside of the door, near the hinge or battery compartment.
- Press the reset button. The keypad will typically beep and/or an indicator light will illuminate.
- Within a few seconds, enter your desired 3 to 8 digit code on the keypad.
- Confirm the code by pressing the 'E' or '#' button. The safe should confirm the new code with a beep or light.
- Тестирајте го новиот код со отворена врата пред да ја затворите.
4.3. Закотвување на сефот
Anchoring the safe provides additional security against theft. The ARREGUI Premier 16501-S1 is equipped with pre-drilled holes for this purpose.
- Hole Configuration: This model features 2 pre-drilled holes on the base and 2 on the rear wall, each with a 9 mm diameter.
- Површина за монтирање: Choose a sturdy surface such as a concrete wall, solid wood, or a robust cabinet.
- Постапка:
- Поставете го сефот на посакуваната локација.
- Mark the drilling points through the pre-drilled holes on the mounting surface.
- Move the safe and drill pilot holes into the marked points using an appropriate drill bit for your surface.
- Reposition the safe and secure it using the provided mounting screws. Ensure all screws are tightened firmly.
Image 4.1: The ARREGUI safe securely installed within a cabinet, demonstrating a common anchoring scenario.
5. Ракување со сефот
5.1. Opening with Electronic Code
- Enter your programmed 3 to 8 digit code on the keypad.
- Press the 'E' or '#' button to confirm.
- If the code is correct, the safe will emit a confirmation sound, and the door will unlock.
- Свртете го копчето во насока на стрелките на часовникот за да ја отворите вратата.
Важно: After 3 consecutive incorrect code entries, the safe will temporarily lock, preventing further attempts for a short period. Wait for the lockout period to expire before trying again.
5.2. Changing the User Code
To change your existing user code:
- Open the safe door using your current code.
- Locate and press the reset button on the inside of the door.
- Enter your new 3 to 8 digit code on the keypad.
- Confirm the new code by pressing the 'E' or '#' button.
- Verify the new code with the door open before closing it.
5.3. Using the Emergency Key
The emergency key provides access to the safe in situations such as forgotten codes, depleted batteries, or keypad malfunction.
- Locate the emergency keyhole, typically concealed behind a small cover or the ARREGUI logo on the keypad panel.
- Внимателно отстранете го капакот.
- Insert one of the provided emergency keys into the keyhole.
- Turn the key to unlock the safe.
- Свртете го копчето за да ја отворите вратата.
- Remember to replace the cover after use.
Слика 5.1: Крупен план view of the safe's electronic keypad with an emergency key inserted into its designated slot, ready for manual override.
6. Одржување
6.1. Замена на батеријата
The safe's keypad features a red LED light that indicates when battery replacement is necessary. When this light illuminates during operation, replace the batteries promptly to avoid being locked out.
- Отворете ја вратата на сефот.
- Locate and open the battery compartment.
- Отстранете ги старите батерии и фрлете ги одговорно.
- Insert 4 new AA 1.5V alkaline batteries, observing correct polarity.
- Затворете ја преградата за батерии.
6.2. Општа нега
- Исчистете ја надворешноста на сефот со мека, дamp крпа. Избегнувајте абразивни средства за чистење или растворувачи.
- Do not lubricate the electronic lock mechanism.
- Regularly check the mounting screws for tightness if the safe is anchored.
7 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Сефот не се отвара со код. | Внесен е неточен код. Батериите се ниски или потрошени. Неисправност на тастатурата. | Внимателно внесете го кодот повторно. Replace batteries (see Section 6.1). Use the emergency key (see Section 5.3). |
| Red LED light illuminates during operation. | Ниска моќност на батеријата. | Replace all 4 AA batteries immediately (see Section 6.1). |
| Safe is temporarily locked. | Премногу неточни записи за код. | Wait for the lockout period to expire (typically a few minutes) before attempting to enter the code again. |
| Вратата не се затвора правилно. | Obstruction in the door frame. Bolts not fully retracted. | Check for any items blocking the door. Ensure the knob is fully turned to retract bolts before closing. |
8. Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | АРЕГУИ |
| Број на модел | Premier 16501-S1 |
| Надворешни димензии (В x Ш x Д) | 20 x 31 x 20 см (7.87"Д x 12.2"Ш x 7.87"В) |
| Внатрешни димензии (В x Ш x Д) | 19.5 x 30.5 x 14.5 см (приближно) |
| Капацитет | 9 литри |
| Материјал | Легуриран челик |
| Дебелина на вратата | 3 мм |
| Дебелина на телото | 1.5 мм |
| Тип на заклучување | Електронска комбинација за заклучување |
| Завртки | 2 solid nickel-plated steel bolts, 16 mm diameter each |
| Должина на кодот | 3 до 8 цифри |
| Извор на енергија | 4 x AA 1.5V алкални батерии (не се вклучени) |
| Пристап за итни случаи | 2 клучеви за итни случаи |
| Тип на монтирање | Wall Mount / Floor Mount (pre-drilled holes) |
| Тежина на ставката | 4.35 кг (9.57 фунти) |
| Боја | Darkgray |
| Отпорност на вода | Не е водоотпорен |
Image 8.1: Diagram illustrating the safe's construction details, including 3 mm door thickness, 1.5 mm body thickness, and 16 mm diameter locking bolts.
Image 8.2: Visual representation of the safe's external dimensions (20x31x20 cm) and internal storage space (19.5x30.5x14.5 cm), along with its 9-liter volume and 5 kg weight.
9. Гаранција и поддршка
9.1. Информации за гаранцијата
Specific warranty terms and conditions for the ARREGUI Premier 16501-S1 safe may vary by region and retailer. Please consult your purchase documentation or contact the retailer where you purchased the product for detailed warranty information.
9.2. Поддршка за корисници
For technical assistance, spare parts, or further inquiries, please contact ARREGUI customer support through their official webстраницата или информациите за контакт дадени со пакувањето на вашиот производ.
