KERUI J008

KERUI J008 Wireless Outdoor Strobe Siren

Упатство за употреба

1. Производот завршиview

The KERUI J008 is a wireless outdoor strobe siren designed to enhance the security of your premises. It features an intelligent microprocessor, a high-decibel siren, and a high-brightness LED flash light to provide an effective deterrent and alert system. This siren can operate as a standalone on-site alarm or integrate with other wireless accessories like remote controls, magnetic door contacts, and PIR detectors.

When integrated into an alarm system and armed, the J008 activates with both sound and light upon detection of a triggered sensor. Its robust design makes it suitable for outdoor installation, offering reliable performance in various environments.

KERUI J008 Wireless Outdoor Strobe Siren front view

Слика 1: Предна страна view of the KERUI J008 Wireless Outdoor Strobe Siren.

2. Информации за безбедност

3. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

4. Поставување и инсталација

4.1 Идентификација на компоненти

Назад view of KERUI J008 siren with labeled components

Слика 2: Назад view of the J008 siren showing the power adapter interface, ON/OFF switch, SET button, 300mAh backup battery, and siren speaker.

4.2 Power Connection and Battery Installation

  1. Ensure the Power ON/OFF switch is in the OFF position.
  2. If not already installed, insert the 3 CR123A batteries into the designated battery compartment. Ensure correct polarity.
  3. Connect the EU power adapter to the Power Adapter Interface on the back of the siren.
  4. Plug the power adapter into a suitable 110-240V AC power outlet.
  5. Switch the Power ON/OFF switch to the ON position. The siren will perform a self-test, and the LED indicator may flash.

The built-in Ni-MH rechargeable battery will automatically charge when the siren is connected to mains power and will provide backup power during power failures.

4.3 Монтирање на сирената

The J008 siren is designed for wall mounting, suitable for both indoor and outdoor environments.

KERUI J008 siren mounted indoors and outdoors, and system diagram

Слика 3: Прamples of indoor and outdoor mounting, and a diagram illustrating the alarm system flow: sensor triggers, signal sent to control panel, control panel activates siren.

  1. Choose a suitable location for mounting. For outdoor use, select a spot that provides good visibility for the strobe light and allows the siren sound to be heard effectively, while also being protected from direct heavy rain if possible.
  2. Use the siren's back plate as a template to mark the drilling points on the wall.
  3. Дупчете дупки и вметнете ѕидни приклучоци доколку е потребно.
  4. Secure the siren to the wall using appropriate screws.
  5. Ensure the siren is firmly attached and the power cable is routed safely.

4.4 Pairing with Wireless Accessories

The J008 siren is compatible with standard PT2262 encoding and millions of group detectors and remote controls. To pair a new accessory (e.g., remote control, door sensor, PIR detector):

  1. Притиснете го ПОСТАВЕТЕ button on the back of the siren. The siren will enter pairing mode, indicated by a specific light or sound cue (refer to specific accessory manual for exact cues).
  2. Within a few seconds, trigger the accessory you wish to pair (e.g., press a button on the remote control, open a door with a door sensor, or trigger a PIR detector).
  3. The siren will emit a confirmation sound or flash to indicate successful pairing.
  4. Repeat for all additional accessories.
  5. Exit pairing mode by pressing the ПОСТАВЕТЕ button again or waiting for a timeout.

5. Упатства за работа

5.1 Вооружување и разоружување

The J008 siren is typically armed and disarmed via a paired remote control or a connected alarm control panel.

5.2 Активирање на аларм

When the system is armed and a paired detector (e.g., door sensor, motion detector) is triggered, the J008 siren will activate:

The alarm will continue for a preset duration or until the system is disarmed.

KERUI J008 siren flashing and sounding, with icons for 110dB sound, outdoor/indoor use, and backup battery

Figure 4: The J008 siren in active alarm state, highlighting its 110dB sound output, suitability for both indoor and outdoor use, and backup battery feature.

6. Одржување

6.1 Грижа за батерии

6.2 Чистење

Clean the exterior of the siren with a soft, damp крпа. Не користете абразивни средства за чистење или растворувачи. Осигурајте се дека влагата не влегува во уредот.

7 Смена на проблеми

Проблем Можна причина Решение
Siren does not power on. No power from adapter; ON/OFF switch is off; backup battery depleted. Check power adapter connection and outlet. Ensure ON/OFF switch is in the ON position. Allow time for backup battery to charge or replace CR123A batteries.
Siren does not sound when a sensor is triggered. System is not armed; sensor not paired; sensor malfunction; siren not receiving signal. Ensure the system is armed. Verify the sensor is correctly paired with the siren/control panel. Check sensor battery. Ensure siren is within range of the control panel/sensor.
Лажни аларми. Sensor sensitivity too high; environmental factors (e.g., pets, wind); interference. Adjust sensor sensitivity if applicable. Reposition sensors to avoid environmental triggers. Check for sources of wireless interference.
Cannot pair new accessories. Siren not in pairing mode; accessory not compatible; accessory not triggered correctly. Ensure the siren is in pairing mode (press SET button). Verify accessory compatibility (PT2262 encoding). Trigger the accessory promptly after entering pairing mode.

8. Спецификации

Модел: J008
Бренд: КЕРУИ
Фреквенција на пренос: 433 MHz
Ниво на звук: 110 dB (+3dB or -3dB)
Работна моќност: 110-240V AC
Резервна батерија: Built-in Ni-MH rechargeable battery (300mAh)
Дополнителни батерии: 3 x CR123A (вклучен)
Контролен метод: Далечински управувач
Тип на монтирање: Монтирање на ѕид
Димензии (Д x Ш x В): 20.1 x 11.2 x 7 cm
Тежина: 420 грама
Компатибилност: PT2262 encoding (Resistance 1.5M-4.7M), millions of group detectors (Resistance 150K-470K)
Боја: Бело
Dimensions of KERUI J008 siren: 20.09cm height, 11.2cm width, 7cm depth

Figure 5: Detailed dimensions of the KERUI J008 siren.

9. Гаранција и поддршка

Specific warranty information for the KERUI J008 Wireless Outdoor Strobe Siren is not provided in the product details. Please refer to your purchase documentation or contact the retailer/manufacturer directly for warranty terms and customer support.

For technical assistance or further inquiries, please visit the official KERUI webсајт или контактирајте со нивниот оддел за услуги на клиентите.

Поврзани документи - J008

Предview KR-SJ1 Solar-Powered Wireless Outdoor Siren - Technical Specifications and Operation
Detailed technical specifications, features, and operating instructions for the KR-SJ1 solar-powered wireless outdoor siren. Learn about its installation, pairing with alarm systems, and standalone operation.
Предview Упатство за користење на систем за аларм против кражба Kerui W193
Упатство за корисникот за алармниот систем против кражба Kerui W193, со детали за инсталацијата, поставувањето и работењето на безбедносниот систем.
Предview Упатство за работа на KERUI WIFI безжичен алармен систем
Упатства за работа на безжичниот алармен систем KERUI WIFI, детали за поставување, карактеристики на перформансите, објаснувања на функциите, мрежно поврзување на домаќинот преку апликацијата Tuya Smart и управување со додатоците.
Предview Упатство за користење на безжичен инфрацрвен детектор за отпорност на домашни миленици KERUI M116-2E
Упатство за корисникот за безжичниот инфрацрвен детектор за отпорност на домашни миленици KERUI M116-2E. Карактеристиките вклучуваат отпорност на домашни миленици, прилагодливо растојание за детекција, RF алармен сигнал и лесна инсталација. Дознајте повеќе за инсталацијата, работењето и техничките спецификации.
Предview KERUI Smart WiFi систем за аларм со звучници: Упатство за работа и карактеристики
Сеопфатни упатства за работа на KERUI Smart WiFi звучничкиот алармен систем, со детали за неговиот преглед, карактеристиките на перформансите, објаснувањата на функциите, мрежното поврзување со домаќинот, преземањето апликации, поставувањето додатоци и техничките спецификации.
Предview Самостоен алармен систем со сирена KERUI: Упатство за работа и карактеристики
Дознајте повеќе за самостојниот систем за аларм со сирена KERUI. Ова упатство опфаќа опис на производот, како да активирате додатоци, да додавате/ресетирате уреди и технички параметри за овој безжичен безбедносен систем.