1. Вовед
This manual provides essential information for the proper installation, operation, and maintenance of your Ohlins HD 772 OHL STX 36 Blackline shock absorbers. To ensure optimal performance and safety, please read this manual thoroughly before attempting any procedures. Keep this manual for future reference.
2. Информации за безбедност
Working with motorcycle suspension components requires specialized knowledge and tools. Improper installation or adjustment can lead to serious injury or damage to your motorcycle. It is strongly recommended that installation and major adjustments be performed by a qualified motorcycle technician.
- Секогаш носете соодветна лична заштитна опрема.
- Ensure the motorcycle is securely supported before beginning any work.
- Refer to your motorcycle's service manual for specific torque specifications and procedures.
- Do not attempt to disassemble the shock absorber. It contains high-pressure gas.
3. Содржина на пакетот
Verify that all components are present and undamaged upon unpacking. The package should contain:
- Two (2) Ohlins HD 772 OHL STX 36 Blackline Shock Absorbers
- Упатство за употреба (овој документ)
This image displays a pair of Ohlins HD 772 OHL STX 36 Blackline shock absorbers, featuring black springs and bodies, designed for motorcycle suspension.
4. Инсталација (Поставување)
Следниве чекори даваат општо надview of the installation process. Always consult your motorcycle's specific service manual for detailed instructions and torque specifications.
- Подгответе го мотоциклот: Secure the motorcycle on a stand so that the rear wheel is off the ground and the swingarm can move freely.
- Remove Original Shocks: Carefully remove the original shock absorbers, noting the orientation of all components.
- Install Ohlins Shocks: Position the Ohlins HD 772 OHL STX 36 Blackline shock absorbers with the correct orientation. Ensure all bushings and spacers are correctly seated.
- Безбедни сврзувачки елементи: Install all bolts and nuts. Tighten to the torque specifications provided in your motorcycle's service manual. Do not overtighten.
- Првични прилагодувања: Perform initial preload adjustments as described in the 'Operation (Adjustment)' section.
- Конечни проверки: Before riding, ensure all fasteners are tight, and there is no interference with other motorcycle components.
Се препорачува професионална инсталација: Due to the critical nature of suspension components, professional installation by an authorized Ohlins service center or a qualified motorcycle mechanic is highly recommended.
5. Operation (Adjustment)
The Ohlins HD 772 OHL STX 36 Blackline shock absorbers are designed for performance and adjustability. The primary adjustment available on this model is spring preload.
5.1 Spring Preload Adjustment
Spring preload affects the ride height and initial compression of the spring. Adjusting preload changes the sag of the motorcycle, which is crucial for proper handling and comfort.
- To Increase Preload: Turn the preload adjuster ring clockwise. This will compress the spring further, increasing ride height and reducing sag.
- To Decrease Preload: Turn the preload adjuster ring counter-clockwise. This will decompress the spring, decreasing ride height and increasing sag.
Важно: Always adjust both shock absorbers equally. Make small adjustments and test the motorcycle's handling. Refer to an Ohlins service manual or consult a professional for detailed sag measurement and adjustment procedures.
6. Одржување
Regular maintenance ensures the longevity and consistent performance of your Ohlins shock absorbers.
- Чистење: Keep the shock absorbers clean from dirt, dust, and road grime. Use mild soap and water, then rinse thoroughly. Avoid high-pressure washers directly on seals.
- Инспекција: Periodically inspect the shock absorbers for any signs of leakage, damage to the body or springs, or wear on the bushings.
- Проверка на прицврстувачите: Regularly check that all mounting bolts are tightened to the correct torque specifications.
- Интервали на сервисирање: Ohlins shock absorbers require periodic servicing (e.g., oil change, seal replacement) by an authorized service center. Consult an Ohlins dealer for recommended service intervals based on your riding conditions.
7 Смена на проблеми
This section addresses common issues you might encounter. For complex problems, contact an authorized Ohlins service center.
| Проблем | Можна причина | Решение |
|---|---|---|
| Excessive Sag / Low Ride Height | Insufficient spring preload. | Increase spring preload (turn adjuster clockwise). |
| Грубо возење / Премногу круто | Excessive spring preload. | Decrease spring preload (turn adjuster counter-clockwise). |
| Истекување на масло | Оштетени заптивки или внатрешни компоненти. | Stop riding immediately. Contact an authorized Ohlins service center for inspection and repair. |
| Невообичаени звуци | Loose mounting bolts, worn bushings, or internal damage. | Check all mounting bolts for proper torque. Inspect bushings for wear. If noise persists, seek professional inspection. |
8. Спецификации
Key specifications for the Ohlins HD 772 OHL STX 36 Blackline shock absorbers:
- Бренд: Олинс
- Модел: HD 772
- Стил: Performance, Blackline
- Тип на сервис на возилото: Мотоцикл
- Позиција на автодел: Заден дел
- Надворешна завршница: Црното
- Материјал: Aluminum, Titanium
- Тежина на ставката: Приближно 7.7 фунти (по пар)
9. Гаранција и поддршка
For information regarding warranty coverage, technical support, or authorized service centers, please refer to the official Ohlins website or contact your local Ohlins dealer. Keep your proof of purchase for warranty claims.