1. Вовед
Thank you for choosing the lightmaXX Vega 3-Way PRO Beam/WASH/FX Moving Head Scanner. This versatile lighting fixture is designed for professional stage, event, and club applications, offering dynamic beam, wash, and special effect capabilities. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
2. Инструкции за безбедност
Please read and understand all safety instructions before installing or operating this device. Failure to comply with these instructions may result in electric shock, fire, or personal injury.
- Овој уред е само за професионална употреба.
- Обезбедете ја јачината на напојувањетоtage одговара на томtage наведено на единицата.
- Секогаш поврзувајте го уредот со заземјен штекер.
- Disconnect from mains power before any service, cleaning, or maintenance.
- Не го вклучувајте уредот ако кабелот за напојување е оштетен.
- Избегнувајте директно изложување на очите на изворот на светлина.
- Ensure adequate ventilation around the unit to prevent overheating. Maintain a minimum distance of 0.5 meters from flammable materials.
- Mount the device securely using appropriate clampи безбедносни кабли.
- Не го отворајте куќиштето; внатре нема делови што може да ги сервисира корисникот. За секое сервисирање обратете се на квалификуван персонал.
- Keep the device away from rain, moisture, and extreme temperatures.
3. Производот завршиview
The lightmaXX Vega 3-Way PRO is a hybrid moving head fixture designed to deliver powerful and versatile lighting effects. It combines beam, wash, and special effect functionalities in one compact unit.
Слика 3.1: Предна страна view of the lightmaXX Vega 3-Way PRO, displaying red light output.
Слика 3.2: Предна страна view of the lightmaXX Vega 3-Way PRO with lights off, showing the lens array.
3.1 Контролна табла и врски
The rear of the unit features the control panel and various input/output connections for power and DMX control.
Figure 3.3: Close-up of the control panel and connection ports.
Слика 3.4: Заден дел view of the lightmaXX Vega 3-Way PRO, showing DMX In/Out, Power In/Out, and fuse.
- DMX ВЛЕЗ/ИЗЛЕЗ: 3-pin XLR connectors for DMX signal input and output.
- ВЛЕЗ/ИЗВЛЕЧУВАЊЕ: PowerCon compatible connectors for mains power input and daisy-chaining power to other units.
- Осигурување: Fuse holder for circuit protection.
- ВКЛУЧЕН/ИСКЛУЧЕН прекинувач: Главен прекинувач за напојување на единицата.
- Прикажи: LCD screen for menu navigation and settings.
- Контролни копчиња: UP, DOWN, ESC, ENTER for navigating the menu and adjusting settings.
- DMX/Run Indicators: LEDs indicating DMX signal presence and auto-run mode.
4. Поставување
4.1 Монтирање
The lightmaXX Vega 3-Way PRO can be mounted in various orientations (floor, truss, wall) using appropriate mounting hardware (not included). Always ensure the mounting surface or truss is capable of supporting the weight of the fixture and any additional equipment.
- Use a safety cable (not included) attached to the designated safety point on the fixture to prevent accidental drops.
- Ensure the fixture is securely fastened and balanced.
- Allow sufficient space around the fixture for ventilation and movement.
4.2 Поврзување за напојување
Connect the provided power cable to the POWER IN connector on the fixture and then to a suitable grounded power outlet. The unit supports daisy-chaining power to other fixtures using the POWER OUT connector, but ensure the total current draw does not exceed the circuit breaker's rating.
4.3 DMX поврзување
To control the fixture via DMX, connect a DMX controller to the DMX IN port using a 3-pin XLR cable. If connecting multiple DMX fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next. The last fixture in the chain should have a DMX terminator connected to its DMX OUT port to prevent signal reflection.
5. Работење
5.1 Навигација на контролната табла
Use the control buttons to navigate the menu and adjust settings:
- ГОРЕ ДОЛУ: Scroll through menu options or increase/decrease values.
- Внесете: Изберете опција или потврдете поставка.
- ESC: Go back to the previous menu or cancel an action.
5.2 Поставување DMX адреса
To control the fixture with a DMX controller, you must set a unique DMX start address for each unit. Refer to the DMX channel chart in your DMX controller's manual for channel assignments.
- Притиснете ENTER за да пристапите до главното мени.
- Navigate to the 'DMX Address' or 'Address Set' option using ГОРЕ/ДОЛУ.
- Притиснете ENTER да изберете.
- Користете ГОРЕ/ДОЛУ to set the desired DMX start address.
- Притиснете ENTER to confirm and save the address.
5.3 Работни режими
The lightmaXX Vega 3-Way PRO typically offers several operating modes:
- DMX режим: Full control over all functions via a DMX controller.
- Режим на автоматско извршување: Pre-programmed internal light shows that run automatically. Select 'Auto Run' from the menu and choose a program.
- Звучен активен режим: The fixture reacts to sound via its built-in microphone. Select 'Sound Active' from the menu.
- Режим Master/Slave: Link multiple units together. Set one unit as 'Master' and others as 'Slave'. The slave units will mirror the master's actions.
6. Одржување
Regular maintenance ensures the longevity and optimal performance of your lightmaXX Vega 3-Way PRO.
- Чистење: Periodically clean the lenses and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and cool before cleaning.
- Вентилација: Keep ventilation openings clear of dust and debris. Use compressed air to gently clear vents if necessary.
- Замена на осигурувачи: If the unit does not power on, check the fuse. Disconnect power, unscrew the fuse holder, and replace with a fuse of the exact same type and rating (refer to specifications).
- Инспекција: Редовно проверувајте ги каблите за напојување, DMX каблите и монтажниот хардвер за какви било знаци на абење или оштетување. Веднаш заменете ги оштетените компоненти.
7 Смена на проблеми
If you encounter issues with your lightmaXX Vega 3-Way PRO, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Нема моќ | No mains power; Blown fuse; Damaged power cable | Check power outlet; Replace fuse; Replace power cable |
| Нема контрола на DMX | Incorrect DMX address; Faulty DMX cable; No DMX signal; Missing terminator | Verify DMX address; Check/replace DMX cables; Ensure DMX controller is active; Add DMX terminator to last fixture |
| Fixture not moving/responding | DMX issue; Internal error; Motor blockage | Check DMX connection/address; Power cycle the unit; Ensure no physical obstructions |
| Прегревање | Blocked ventilation; Insufficient airflow | Clear vents; Ensure proper spacing for airflow |
If the problem persists after attempting these solutions, please contact lightmaXX customer support or your authorized dealer.
8. Спецификации
| Карактеристика | Спецификација |
|---|---|
| Модел | Vega 3-Way PRO Beam/WASH/FX |
| Референца на производителот | LIG0014819-000 |
| Потрошувачка на енергија | 240 вати |
| Димензии (Д x Ш x В) | 43.5 x 36.5 x 33 cm |
| Тежина | 11.1 килограми |
| Поврзување | DMX (3-pin XLR), PowerCon compatible (In/Out), USB (for service/firmware) |
| Технологија на оптички сензор | CMOS |
| Резолуција | 600 (units not specified, likely for internal sensor) |
9. Гаранција и поддршка
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your authorized lightmaXX dealer. If you require technical assistance or have questions not covered in this manual, please contact lightmaXX customer support or your retailer for further guidance.
