1. Вовед
Thank you for choosing the DXQ FL-40 High Pressure Diaphragm Pump. This manual provides essential information for the proper installation, operation, and maintenance of your pump. Please read it thoroughly before use to ensure safe and efficient performance.
Figure 1: DXQ FL-40 High Pressure Diaphragm Pump
Клучни карактеристики:
- Издржлив материјал: Constructed from high-strength cast iron with powder coating, ensuring waterproof and rust-resistant properties for long-term use.
- Powerful Automatic Pressure Pump: A fully automatic self-priming pump with a maximum flow rate of 17 L/min and an inlet PSI set to Max 40PSI (2.76Bar). Operates on 12V AC power.
- Безбедносна заштита: Features built-in thermal protection and automatic pressure protection. Designed for long service life with quiet operation and no leakage.
- Брза инсталација: Compact size, lightweight design, and stable performance facilitate instant assembly.
- Разновидни апликации: Suitable for various uses including food and beverage filling, liquid transfer, clean machine requirements, road work, and cooling systems.
Figure 2: Wide range of applications for the FL-40 pump
2. Инструкции за безбедност
Always observe the following safety precautions to prevent injury or damage to the pump.
- Осигурајте се дека напојувањето се совпаѓа со јачината на звукот на пумпата.tage барања (12V).
- Do not operate the pump with damaged wiring or connections.
- Avoid running the pump dry for extended periods, as this can cause damage.
- Ensure proper ventilation around the pump during operation.
- Do not use the pump for flammable liquids or in explosive atmospheres.
- Држете ги рацете и широката облека подалеку од подвижните делови.
- Disconnect power before performing any maintenance or troubleshooting.
- The pump features built-in thermal protection to prevent overheating. If the pump stops unexpectedly, allow it to cool down before restarting.
Figure 3: Thermal Protection feature of the pump
3. Вклучени компоненти
The DXQ FL-40 High Pressure Diaphragm Pump package typically includes the following components:
- 1 x Diaphragm Water Pump
- 1 x Филтер
- 3 x Fittings (various types for connection)
Figure 4: Included filter and fittings
Figure 5: Key components and connections of the pump
4. Поставување и инсталација
Follow these steps for quick and proper installation of your diaphragm pump:
- Монтирање: Securely mount the pump in a dry, well-ventilated area using the stable bracket. Ensure it is on a flat, stable surface to minimize vibration.
- Влезна врска: Connect the water inlet hose to the designated inlet port (often labeled 'Inlet' or indicated by an arrow pointing towards the pump). It is recommended to install the included filter on the inlet line to prevent debris from entering the pump.
- Приклучок за излез: Connect the water outlet hose to the designated outlet port (often labeled 'Outlet' or indicated by an arrow pointing away from the pump).
- Електрична врска: Connect the pump's power wires to a 12V DC power source. Ensure correct polarity (red wire to positive, black wire to negative). It is advisable to install an inline fuse for protection.
- Prime the Pump (if necessary): While this is a self-priming pump, ensuring the inlet line is filled with water before the first use can aid in faster priming.
- Проверете дали има протекување: After all connections are made, slowly introduce water into the system and check for any leaks at the fittings. Tighten connections as needed.
Figure 6: Fast assembly and water flow direction
5. Операција
Once installed, operating the DXQ FL-40 pump is straightforward:
- Стартување на пумпата: Ensure all connections are secure and the power source is ready. Apply 12V DC power to the pump. The pump will begin to operate and self-prime.
- Автоматско работење: The pump is designed to automatically turn on when water is demanded (e.g., a faucet is opened) and turn off when the demand stops and pressure builds up in the system.
- Проток и притисок: The pump delivers a maximum flow of 17 L/min and maintains pressure up to 40 PSI.
- Следење: Periodically check the pump for unusual noises, vibrations, or leaks during operation.
6. Одржување
Редовното одржување обезбедува долготрајност и оптимални перформанси на вашата пумпа:
- Чистење на филтерот: Regularly inspect and clean the inlet filter to prevent clogging and maintain optimal flow. Disconnect power, remove the filter housing, clean the mesh screen, and reassemble.
Figure 7: The included metal filter for debris prevention
- Проверка на врската: Periodically check all hose and electrical connections for tightness and signs of wear.
- Зимување (ако е применливо): If the pump is used in an environment where temperatures drop below freezing, ensure it is drained completely or protected with RV antifreeze to prevent damage from freezing water.
- Општо чистење: Одржувајте ја надворешноста на пумпата чиста и без нечистотија и остатоци.
7 Смена на проблеми
Погледнете ја табелата подолу за вообичаени проблеми и нивни решенија:
| Проблем | Можна причина | Решение |
|---|---|---|
| Пумпата не работи | No power; Loose wiring; Blown fuse; Motor fault | Check power supply; Secure connections; Replace fuse; Contact support |
| Низок проток или притисок | Clogged inlet filter; Kinked or restricted hose; Air in system; Low voltage | Clean filter; Straighten hose; Bleed air from system; Check power supply |
| Пумпата работи постојано | Leak in system; Pressure switch malfunction; Open faucet | Check for leaks and repair; Contact support for pressure switch; Close all faucets |
| Пумпата е бучна | Air in system; Loose mounting; Debris in pump | Bleed air; Secure mounting; Disconnect power and inspect pump (if safe) |
| Истекува вода од пумпата | Loose fittings; Damaged seals/diaphragm | Tighten fittings; Contact support for seal replacement |
8. Технички спецификации
Detailed specifications for the DXQ FL-40 Diaphragm Pump:
| Спецификација | Вредност |
|---|---|
| Производител | BananaB (DXQ) |
| Број на модел | FL-40GMB12V000001 |
| Димензии на производот | 36 x 12 x 10 см (приближно 14.2 x 4.7 x 3.9 инчи) |
| Тежина | 2.4 кг (приближно 5.3 фунти) |
| Боја | Црното |
| Стил | Дијафрагма |
| Материјал | Леано железо |
| Извор на енергија | 12V DC |
| Voltage | 12 волти |
| Максимална стапка на проток | 17 литри во минута |
| Максимален притисок | 40 PSI (2.76 Бар) |
| Максимална висина на подигнување | 2 метри |
| Вклучени батерии? | бр |
| Потребни се батерии? | бр |
Figure 8: Pump dimensions
Figure 9: Durable Cast Iron Material
9. Информации за гаранцијата
For specific warranty terms and conditions, please refer to the product packaging or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.
10. Поддршка за корисници
If you encounter any issues not covered in this manual or require further assistance, please contact the seller or manufacturer through the platform where you purchased the product. Provide your model number and a detailed description of the issue for faster service.
