1. Вовед и повеќеview
The Laserliner CoatingTest-Master 082.150A is a precision instrument designed for non-destructive measurement of coating thicknesses on various metal surfaces. It utilizes both magnetic induction and eddy current principles to accurately determine the thickness of non-metallic layers.
This device is capable of measuring non-magnetic coatings such as paint and zinc on steel, as well as insulating coatings like paint and anodized layers on non-ferrous metals. It features automatic identification of the base material (ferrous/ferromagnetic or non-ferrous/non-ferromagnetic), an internal memory for 400 measured values, and options for one-point and two-point calibration. Data transfer and evaluation are facilitated via a USB interface. The illuminated display provides Min/Max/Avg readings for comprehensive analysis.
Figure 1: Laserliner CoatingTest-Master 082.150A device.
2. Содржина на пакетот
По отварањето на пакувањето, проверете дали се вклучени сите од следниве ставки:
- Laserliner CoatingTest-Master 082.150A device
- Заштитна торбичка за носење
- USB кабел за пренос на податоци
- Calibration foils/plates (for one-point and two-point calibration)
- Упатство за употреба (овој документ)
- Software CD (for data evaluation)
- Батерии (ако се вклучени)
Figure 2: Contents of the CoatingTest-Master package.
3. Поставување
3.1 Инсталација на батерија
The CoatingTest-Master requires batteries for operation. Locate the battery compartment on the back of the device. Insert the specified battery type (e.g., AAA batteries) ensuring correct polarity as indicated inside the compartment. Close the battery cover securely.
3.2 Вклучување/исклучување
Притиснете и задржете го Моќ копче (обично означено со симбол за вклучување) ⏻) to turn the device on. The display will illuminate. To turn off the device, press and hold the Моќ button again until the display shuts down.
4. Упатства за работа
4.1 Основно мерење
To perform a basic coating thickness measurement:
- Проверете дали уредот е вклучен.
- Place the small measuring head firmly and perpendicularly onto the surface to be measured. The device will automatically detect the base material (ferrous or non-ferrous).
- The coating thickness reading will be displayed on the screen in micrometers (µm).
- Lift the measuring head from the surface to prepare for the next measurement.
Figure 3: The device features a small measuring head for pinpoint accuracy.
4.2 Калибрација
For accurate measurements, especially when measuring different types of coatings or base materials, calibration is essential. The CoatingTest-Master supports one-point and two-point calibration.
4.2.1 Калибрација во една точка
This method uses a single known thickness to adjust the device. Refer to the on-screen prompts or specific manual section for detailed steps on using the provided calibration foils.
4.2.2 Калибрација во две точки
This method uses two known thicknesses (e.g., zero and a specific thickness) for more precise calibration across a range. Follow the device's on-screen instructions for this procedure.
4.3 Управување со податоци
The device has an internal memory for up to 400 measured values. Use the navigation buttons to review stored data. To transfer data to a computer, connect the device via the provided USB cable and use the accompanying software for evaluation.
4.4 Функции на екранот
The illuminated display shows the current measurement, and can also cycle through Minimum (Min), Maximum (Max), and Average (Avg) values of a series of measurements. Consult the device's on-screen menu for accessing these display modes.
5. Одржување
Proper maintenance ensures the longevity and accuracy of your CoatingTest-Master.
- Чистење: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the measuring head is kept clean and free of debris.
- Складирање: When not in use, store the device in its protective carrying case in a dry, dust-free environment, away from extreme temperatures and direct sunlight.
- Замена на батерија: Replace batteries promptly when the low battery indicator appears on the display to avoid interruption of measurements and potential data loss.
6 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Уредот не се вклучува. | Мртви или неправилно инсталирани батерии. | Проверете го поларитетот на батериите; заменете ги батериите. |
| Неточни читања. | Device not calibrated; dirty measuring head; incorrect measurement technique. | Perform calibration; clean measuring head; ensure proper contact with surface. |
| USB data transfer failure. | Incorrect cable connection; software not installed or running; driver issues. | Ensure secure USB connection; install/reinstall software and drivers; try a different USB port. |
7. Спецификации
| Карактеристика | Детал |
|---|---|
| Принцип на мерење | Magnetic Induction (FE) / Eddy Current (NFe) |
| Measuring Range (FE) | 0 - 1250 µm |
| Accuracy (FE) | 0–850 µm: ±(3% + 1 µm); 850–1250 µm: ±5% |
| Measuring Range (NFe) | 0 - 1250 µm |
| Accuracy (NFe) | 0–850 µm: ±(3% + 1 µm); 850–1250 µm: ±5% |
| Base Material Identification | Automatic (Ferrous / Non-Ferrous) |
| Меморија | 400 измерени вредности |
| Калибрација | One-point and Two-point |
| Интерфејс | USB |
| Приказ | Illuminated, Min/Max/Avg display |
8. Гаранција и поддршка
Laserliner products are manufactured with high quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Laserliner webлокација. Чувајте ја сметката за купување како доказ за какви било гаранциски побарувања.
For further assistance, you may contact Laserliner customer service through their official channels. Contact details are typically available on the manufacturer's webлокацијата или во пакувањето на производот.