RYOBI P739 1 GAL. 120 PSI Portable 18V ONE+ Horizontal Air Compressor

Вовед

Thank you for choosing the RYOBI P739 1 Gallon 120 PSI Portable 18V ONE+ Horizontal Air Compressor. This versatile and compact air compressor is designed for a variety of inflation tasks, from vehicle tires to recreational inflatables, and can also power small pneumatic tools. Its cordless design, powered by the RYOBI ONE+ 18V battery system, offers exceptional portability and convenience for both indoor and outdoor projects.

Слика 1: Севкупно view of the RYOBI P739 Air Compressor.

Информации за безбедност

Always read and understand the entire instruction manual before operating the air compressor. Failure to follow all instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.

• Заштита на очите: Always wear ANSI Z87.1 compliant eye protection with side shields when operating or performing maintenance on the compressor.
• Заштита на слухот: Носете заштита за слух за време на работата за да спречите оштетување на слухот.
• Вентилација: Operate the compressor in a well-ventilated area. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Електрична безбедност: Проверете дали изворот на енергија одговара на јачината на звукотtage requirements of the compressor. Avoid using extension cords if possible; if necessary, use only appropriate gauge and length.
• Олеснување на притисокот: Never exceed the maximum pressure rating of any tool or accessory. Always relieve air pressure from the tank before servicing or storing the compressor.
• Испуштање на резервоарот: Редовно исцедете ја влагата од резервоарот за воздух за да спречите корозија и да обезбедите безбедно работење.
• Деца и минувачи: Држете ги децата и случајните минувачи подалеку од операционата област.

Содржина на пакетот

The RYOBI P739 Air Compressor package includes:

• RYOBI P739 1 Gallon 120 PSI Portable 18V ONE+ Horizontal Air Compressor
• Сопственик прирачник
• Inflation Accessories (various nozzles and needles)

Забелешка: Батеријата и полначот се продаваат одделно.

Спецификации

Figure 2: Product dimensions of the RYOBI P739 Air Compressor.

Поставување

1. Инсталирајте ја батеријата: Ensure your RYOBI ONE+ 18V battery is fully charged. Slide the battery into the battery port on the compressor until it clicks securely into place.


Figure 3: Inserting the 18V ONE+ battery into the compressor.

2. Поврзете го цревото за воздух: The compressor features both high-pressure and low-pressure inflation/deflation ports. For high-pressure tasks like tires, connect the appropriate chuck to the high-pressure outlet. For low-pressure tasks like inflatables, attach the large diameter hose to the low-pressure port.


Figure 4: Labeled components including high-pressure and low-pressure ports.

3. Вклучување: Press the power button on the control panel to turn on the compressor. The digital display will illuminate.

Упатства за работа

Општа операција

The control panel features a digital display, mode selection, and +/- buttons for adjusting pressure settings. The compressor has an automatic shut-off feature once the set pressure is reached.

High-Pressure Inflation (Tires)

1. Поставете го саканиот притисок: Use the +/- buttons on the control panel to set the target PSI (Pounds per Square Inch) for your tire. Refer to your vehicle's owner's manual or tire sidewall for recommended pressure.
2. Connect Chuck: Securely attach the high-pressure chuck to the tire valve stem. Ensure a tight seal to prevent air leakage.
3. Започнете со инфлација: Press the START/STOP button to begin inflation. The compressor will automatically stop once the preset PSI is reached.
4. Исклучете го: Once inflation is complete, disconnect the chuck from the valve stem.

Figure 5: Inflating a car tire using the high-pressure hose.

Low-Pressure Inflation/Deflation (Inflatables)

1. Attach Large Hose: Connect the large diameter hose to the low-pressure inflation/deflation port. Select the appropriate nozzle for your inflatable item.
2. Надувување/издувување: For inflation, connect the hose to the item and press the START/STOP button. For deflation, connect the hose to the item and select the deflation mode (if available, or reverse the hose connection if applicable to the specific model).
3. Монитор: Monitor the inflation/deflation process visually. This mode does not have an automatic shut-off based on pressure.

Одржување

• Резервоар за исцедување на воздух: Regularly drain moisture from the air tank using the 1/4 turn tank drain valve located at the bottom of the tank. This prevents rust and extends the life of the compressor.
• Филтер за чист воздух: Periodically inspect and clean the air filter to ensure optimal performance. Refer to the manual for specific cleaning instructions.
• Правилно складирање: Store the compressor in a clean, dry area away from extreme temperatures. Disconnect the battery when not in use for extended periods.

Решавање проблеми

Гаранција и поддршка

For warranty information, technical support, or to order replacement parts, please refer to the warranty card included with your product or visit the official RYOBI webлокација. Чувајте ја сметката за купување како доказ за какви било гаранциски побарувања.