1. Вовед
The GameMax Mirage 120mm PC Cooling Fan is designed to provide efficient cooling for computer components while offering customizable RGB lighting. This fan features a dual-ring Rainbow LED design, a hydraulic bearing for quiet operation, and a 7-blade fan structure. It is compatible with 5V addressable 3-pin Aura Sync systems, allowing for synchronized lighting effects with compatible motherboards or controllers.
Слика 1.1: напред view of the GameMax Mirage fan with active Rainbow LED lighting.
2. Информации за безбедност
- Пред инсталација или одржување, проверете дали вашиот компјутерски систем е исклучен од струја и исклучен од штекерот.
- Handle components with care to avoid damage from static electricity. Consider using an anti-static wrist strap.
- Do not force connectors. Ensure correct orientation before plugging in cables.
- Држете го вентилаторот подалеку од течности и прекумерна влага.
- Do not attempt to disassemble the fan unit beyond what is described in this manual.
3. Содржина на пакетот
Проверете дали сите артикли се присутни во вашиот пакет:
- 1 x GameMax Mirage 120mm PC Cooling Fan
- 4 x завртки за монтирање
Image 3.1: Retail packaging for the GameMax Mirage fan.
4. Поставување и инсталација
Follow these steps to install your GameMax Mirage 120mm PC Cooling Fan:
- Подгответе го вашиот систем: Power off your computer and unplug it from the power outlet. Open your computer case to access the fan mounting locations.
- Монтирајте го вентилаторот: Position the fan in your desired location (e.g., case front, rear, top, or radiator). Ensure the airflow direction is correct for your cooling setup. Use the four included mounting screws to secure the fan to the chassis or radiator. The fan features rubber pads on the corners to help reduce vibration.
- Connect Fan Power: Locate the 3-pin power connector on the fan cable. Connect this cable to an available 3-pin fan header on your motherboard or a fan controller.
- Connect RGB Lighting: Locate the 5V addressable 3-pin Aura connector on the fan cable. Connect this to a compatible 5V ARGB header on your motherboard (often labeled 'VDG' or 'ARGB') or an external RGB controller/hub. Warning: Do not connect this to a 12V RGB header, as it will damage the LEDs.
Image 4.1: The 3-pin power connector (top) and 5V addressable 3-pin Aura connector (bottom).
The fan cables are braided for improved aesthetics and durability, helping to keep your build neat and tidy.
5. Упатства за работа
Once installed, the GameMax Mirage fan operates as follows:
- Контрола на брзината на вентилаторот: The fan speed is controlled via the 3-pin power connector. If connected to a motherboard fan header, the speed can typically be adjusted through your motherboard's BIOS/UEFI settings or dedicated software.
- Контрола на RGB осветлување: The Rainbow LED lighting is controlled via the 5V addressable 3-pin Aura connector.
- If connected to a compatible motherboard (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync), you can use the motherboard's software to customize lighting effects, colors, and synchronization with other ARGB components.
- If connected to an external RGB hub/controller, refer to the instructions provided with your specific hub/controller for lighting customization options.
Слика 5.1: Под агол view of the GameMax Mirage fan showcasing its dual-ring Rainbow LED lighting.
6. Одржување
Regular maintenance helps ensure optimal performance and longevity of your cooling fan:
- Чистење прашина: Periodically inspect the fan blades and frame for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the fan is powered off and unplugged before cleaning.
- Инспекција на кабел: Occasionally check the power and RGB cables for any signs of wear or damage.
7 Смена на проблеми
- Вентилаторот не се врти:
- Ensure the 3-pin power connector is securely plugged into a functional fan header on the motherboard or controller.
- Check motherboard BIOS/UEFI settings to ensure the fan header is enabled and configured correctly.
- LEDs Not Lighting Up or Incorrect Colors:
- Verify the 5V addressable 3-pin Aura connector is securely connected to a compatible 5V ARGB header (not 12V RGB).
- Ensure your motherboard's RGB software or external controller is properly installed and configured.
- If using a splitter or hub, ensure it is powered and functioning correctly.
- Прекумерна бучава:
- Проверете дали има кабли или пречки што им пречат на перките на вентилаторот.
- Ensure the fan is securely mounted and the rubber pads are properly seated to absorb vibrations.
- Dust accumulation can cause imbalance and noise; clean the fan as described in the Maintenance section.
8. Спецификации
| Карактеристика | Спецификација |
|---|---|
| Модел | MIRAGEWHITE FINS |
| Големина на вентилаторот | 120 mm x 120 mm x 25 mm (0.98 x 4.72 x 4.72 инчи) |
| Тип на лежиште | Хидраулично лежиште |
| Сечила за навивачи | 7 Сечила |
| Тип на LED | Addressable Rainbow LED (Dual-Ring) |
| Конектор за напојување на вентилаторот | 3-Пински |
| RGB конектор | 5V Addressable 3-Pin Aura Connector |
| Оперативен волtage | 5 Volts (for RGB) / 12 Volts (for fan motor, typical for 3-pin) |
| Оценет Ватtage | 3 вати |
| Максимална брзина на ротација | 1800 вртежи во минута |
| Ниво на бучава | Приближно 25 dB(A) |
| Материјал | Rubber (for vibration dampening) |
Слика 8.1: Назад view of the GameMax Mirage fan, displaying the product label with model and electrical specifications.
9. Гаранција и поддршка
За информации за гаранцијата и техничка поддршка, ве молиме погледнете го официјалниот GAMEMAX webлокација или контактирајте го вашиот продавач. Зачувајте го доказот за купување за гаранциски барања.