Производот завршиview
The Apera Instruments 3M KCL Storage Solution is specifically formulated with high-purity chemicals to maintain and extend the operational lifespan of pH and ORP electrodes. This solution is essential for proper electrode care, preventing sensitivity and accuracy degradation that can occur when electrodes are stored dry.
Главните карактеристики вклучуваат:
- Designed for conditioning and extending the life of your probes.
- Made with reagent grade chemicals to ensure optimal performance of your pH probes.
- Double-sealed packaging to ensure freshness and prevent leakage.
- Expiration date clearly specified on the bottle for proper inventory management.
Поставување и подготовка
Before storing your pH or ORP electrode, ensure it is thoroughly cleaned according to your electrode's specific cleaning instructions. This removes any contaminants that could affect the electrode's performance or the storage solution's integrity.
Слика: A white plastic bottle containing Apera Instruments 3M KCL Storage Solution. The label on the bottle is primarily in German, indicating "Elektrolyt Lösung" (Electrolyte Solution) and "Kaliumchlorid 3mol/l" (Potassium Chloride 3mol/l), with a volume of "250 ml". The Apera Instruments logo is visible at the top of the label. The bottle has a black ribbed screw cap.
Упатства за работа
Routine Electrode Storage
To maintain optimal performance and extend the life of your pH or ORP electrode, it is highly recommended to store the electrode in Apera Instruments 3M KCL Storage Solution when not in use. This prevents the electrode's sensitive glass bulb and reference junction from drying out.
- Ensure the electrode is clean.
- Отстранете го заштитното капаче од електродата.
- Fill the electrode's storage cap or a small container with a sufficient amount of 3M KCL storage solution to fully immerse the electrode's sensing bulb and reference junction.
- Place the electrode into the solution, ensuring the sensing part is completely submerged.
- Secure the electrode in the solution to prevent spillage and evaporation.
Restoring Dry or Sluggish Electrodes
If your pH or ORP electrode has been stored dry, or if it exhibits sluggish response or unstable readings, its sensitivity and accuracy may be temporarily compromised. The 3M KCL storage solution can help restore its performance.
- Темелно исчистете ја електродата.
- Immerse the electrode's sensing bulb and reference junction in Apera Instruments 3M KCL Storage Solution.
- Allow the electrode to soak in the solution for a minimum of 1 hour, or preferably overnight, to rehydrate the glass membrane and re-establish the reference junction potential.
- After soaking, rinse the electrode with distilled water and perform a calibration before use.
Maintenance and Storage of Solution
To ensure the longevity and effectiveness of your Apera Instruments 3M KCL Storage Solution, follow these guidelines:
- Температура на складирање: Store the solution between 5°C and 30°C (41°F and 86°F). Avoid extreme temperatures.
- Запечатување: Always keep the container tightly closed when not in use to prevent evaporation and contamination. The double-sealed packaging helps maintain freshness.
- Датум на истекување: Refer to the expiration date printed on the bottle. Do not use the solution past its expiration date, as its chemical properties may degrade, affecting its effectiveness.
- Контаминација: Avoid introducing foreign substances into the solution. If the solution appears cloudy or discolored, it may be contaminated and should be replaced.
Решавање проблеми
This section addresses common issues related to electrode performance and how the storage solution can help.
| Проблем | Можна причина | Решение |
|---|---|---|
| Electrode shows unstable readings or slow response. | Electrode membrane is dry or dehydrated. | Soak the electrode in Apera Instruments 3M KCL Storage Solution for at least 1 hour, or overnight. Ensure the sensing bulb is fully submerged. |
| Electrode requires frequent calibration. | Improper storage leading to degradation of electrode performance. | Always store the electrode in 3M KCL storage solution when not in use. If performance has degraded, try reconditioning by soaking. |
| Solution appears cloudy or contaminated. | Exposure to contaminants or expired solution. | Discard the contaminated or expired solution and replace with fresh Apera Instruments 3M KCL Storage Solution. |
Спецификации
| Атрибут | Детал |
|---|---|
| Име на производ | 3M KCL Storage Soaking Solution |
| Број на модел | AI1107 |
| Бренд | Апера Инструменти |
| Волумен на ставка | 8 унци течност (приближно 236 мл) |
| KCL Concentration | 3M (3 mol/L) |
| Формулар за ставка | Течност |
| Информации за пакетот | Шише |
| Димензии на производот | 6.3 x 1.97 x 2.36 инчи |
| Тежина на ставката | 9 унци |
| Земја на потекло | САД |
Информации за гаранцијата
Specific warranty details for the Apera Instruments 3M KCL Storage Soaking Solution are not provided in this manual. For comprehensive warranty information, please refer to the official Apera Instruments webвеб-страница или директно контактирајте ја нивната корисничка поддршка.
Поддршка и контакт
For further assistance, technical support, or to download batch certificates for your solution, please visit the official Apera Instruments webсајт:
(Note: The image indicates a German website for certificates: aperainst.de/chargenzertifikate/. Please refer to your region's specific support channels.)
