1. Вовед
This manual provides essential information for the safe and effective use of ELEGOO ABS-Like 3D Printer Resin. This photopolymer resin is designed for 3D printing with 385-410nm UV LCD/DLP/MSLA printers, offering high precision, low shrinkage, and enhanced tenacity for detailed and durable prints.
2. Безбедносни мерки на претпазливост
Always prioritize safety when handling resin. Read all instructions before use.
- Добро протресете пред употреба: Ensure the resin is thoroughly mixed before pouring to achieve consistent print quality.
- Препорачана температура: Use the resin in an environment with a temperature between 20°C and 25°C (68°F - 77°F) for optimal performance.
- Носете заштитна опрема: Секогаш носете ракавици и маска за да избегнете директен контакт со кожата и вдишување на испарувања.
- Складирање: Keep the resin away from children, dust, and direct sunlight. Store in a cool, dry, and well-ventilated area.
- Итен контакт: In case of direct skin contact, wash immediately with plenty of water. If irritation persists or if ingested, seek medical attention.
3. Карактеристики на производот
ELEGOO ABS-Like Photopolymer Resin offers a balance of strength, flexibility, and precision, making it suitable for a wide range of 3D printing applications.
- High Precision & Low Shrinkage: Features low volume and linear shrinkage, ensuring smooth surface finishes, fine textures, and accurate dimensions.
- Less Brittleness & Higher Tenacity: Possesses mechanical properties similar to ABS plastic, including high impact resistance, good strength, and increased tenacity, reducing fracture or deformation.
- Good Fluidity & Low Viscosity: Rapid solidification and smooth flowback prevent