Вовед
The RCF F-10XR is a versatile 10-channel professional mixing console designed for a wide range of audio applications, from live sound to studio recording. It features high-quality preamplifiers, a comprehensive EQ section, built-in 24-bit multi-effects, and a USB audio interface for direct recording and playback. This manual provides detailed instructions for setting up, operating, and maintaining your F-10XR mixer to ensure optimal performance and longevity.
Информации за безбедност
- Напојување: Користете го само наведениот адаптер за напојување. Осигурајте се дека јачината на звукотtage matches your local power supply. Disconnect power before cleaning or servicing.
- Вентилација: Не ги блокирајте отворите за вентилација. Обезбедете соодветен проток на воздух околу уредот за да спречите прегревање.
- Влага: Do not expose the unit to rain, moisture, or excessive humidity. Keep liquids away from the mixer.
- Поставување: Place the mixer on a stable, flat surface. Avoid placing it near heat sources or in direct sunlight.
- Сервисирање: Не обидувајте се сами да го сервисирате уредот. За сите сервисирања обратете се на квалификуван персонал.
- Заштита на слухот: Prolonged exposure to high volume levels can cause permanent hearing damage. Use caution when setting output levels.
Поставување
Follow these steps to set up your RCF F-10XR mixer:
- Отпакување: Carefully remove the mixer from its packaging and inspect it for any signs of damage.
- Поврзување за напојување: Connect the provided power adapter to the mixer's power input and then to a suitable electrical outlet. Ensure the mixer's power switch is in the OFF position before connecting.
- Влезни врски:
- Микрофони: Connect microphones to the XLR (MIC IN) inputs on channels 1-4. For condenser microphones requiring phantom power, ensure the +48V switch is engaged (see Operating Instructions).
- Уреди на линиско ниво: Connect instruments or other line-level devices to the 1/4" TRS (LINE IN) inputs on channels 1-4, or to the stereo 1/4" TRS (MONO/STEREO) inputs on channels 5/6, 7/8, and 9/10. Channels 7/8 and 9/10 also feature RCA inputs for stereo line-level sources.
- Излезни врски:
- Главни резултати: Connect your main PA system or recording interface to the MAIN OUTPUT R and L XLR or 1/4" TRS jacks.
- Контролна соба: Connect studio monitors to the CTRL ROOM OUTPUT 1/4" TRS jacks.
- Слушалки: Connect headphones to the PHONES OUTPUT 1/4" TRS jack.
- AUX излез: Use the AUX OUTPUT 1/4" TRS jack for sending a monitor mix or external effects.
- USB конекција: For stereo recording and playback, connect a USB cable from the mixer's USB port to your computer or compatible iOS device (with appropriate adapter).
Слика 1: Во текот наview of the RCF F-10XR mixer's top panel, highlighting the various input and output connections, along with the main control sections for each channel, effects, and master outputs. The image clearly shows the MIC IN, LINE IN, STEREO LINE INPUTs, MAIN OUTPUT, CTRL ROOM OUTPUT, PHONES OUTPUT, and AUX OUTPUT sections, as well as the individual channel strips with GAIN, EQ, AUX/FX, PAN/BAL, and LEVEL controls. The PRO DSP FX section and the main mix fader are also visible.
Упатства за работа
Input Channels (1-4)
- MIC IN / LINE IN: XLR inputs for microphones and 1/4" TRS inputs for line-level signals.
- ДОБИВКА: Adjusts the input sensitivity for the connected microphone or line source. Set this to achieve a healthy signal level without clipping (indicated by the PEAK LED).
- COMP (Channels 1 & 2 only): Single-knob compressor for dynamic range control. Turn clockwise to increase compression.
- EQ (висок, среден, низок): 3-band equalizer for shaping the tone of the input signal.
- EQ HIGH (10 kHz): Ги прилагодува високите фреквенции.
- EQ MID (1250 Hz): Ги прилагодува фреквенциите во средниот опсег.
- EQ LOW (100 Hz): Ги прилагодува бас фреквенциите.
- AUX/FX POST: Sends a portion of the channel signal to the internal effects processor or external AUX output. This is a post-fader send, meaning its level is affected by the channel fader.
- ПАН: Adjusts the stereo position of the channel signal in the main mix (left to right).
- НИВО: The main fader for controlling the output level of the individual channel to the main mix.
- PEAK LED: Illuminates when the input signal is too high, indicating potential clipping. Reduce the GAIN control if this LED lights up frequently.
Stereo Channels (5/6, 7/8, 9/10)
- STEREO INPUT: 1/4" TRS inputs for channels 5/6, 7/8, 9/10. Channels 7/8 and 9/10 also include RCA inputs.
- ДОБИВКА: Adjusts the input sensitivity for the stereo line source.
- EQ (High, Low): 2-band equalizer for shaping the tone of the stereo input signal.
- AUX/FX POST: Sends a portion of the channel signal to the internal effects processor or external AUX output.
- BAL (Биланс): Adjusts the balance between the left and right signals of the stereo channel.
- НИВО: The main fader for controlling the output level of the stereo channel to the main mix.
- PEAK LED: Illuminates when the input signal is too high.
Phantom Power (+48V)
The F-10XR provides +48V phantom power for condenser microphones on channels 1-4. Engage the PHANTOM POWER +48V CH1/4 switch to activate. Ensure all condenser microphones are connected before engaging phantom power, and disconnect them after disengaging to prevent damage.
PRO DSP FX (Internal Effects)
The mixer includes a 24-bit internal effects processor with 16 studio-quality presets. To use the effects:
- Изберете ефект: Завртете го ROTATE TO SEL knob to choose one of the 16 effects. The selected effect number will be displayed.
PRO DSP FX Presets бр. Ефект бр. Ефект 01 Мала сала 09 Аналогно одложување 02 Голема сала 10 Рефрен Глагол 03 Мала соба 11 Стерео рефрен 04 Светла соба 12 Флангер 05 Тенка плоча 13 Phaser 06 Плоча 14 Gated Reverb 07 Spring Reverb 15 Flanger Verb 08 Одложување со повеќекратни допири 16 Вокално ехо - Apply Effect: Користете го AUX/FX POST knobs on individual channels to send signal to the effects processor.
- FX MASTER: Го контролира вкупното ниво на ефектите испратени до главниот микс.
- ВРАЌАЊЕ во девизен курс: Controls the level of the processed effect signal returning to the main mix.
- FX MUTE: Го исклучува излезот на ефектите.
Снимање и репродукција преку USB
The F-10XR features a built-in USB audio interface for stereo recording and playback with a computer or compatible iOS device.
- Снимање: Connect the mixer to your computer via USB. The mixer will appear as an audio input device. Select it in your Digital Audio Workstation (DAW) software to record the stereo main mix.
- Репродукција: Audio played from your computer can be routed back to the mixer via USB. The IN USB IN 9/10 switch routes the USB playback to stereo channel 9/10, allowing you to mix it with other inputs.
Излезен дел
- MAIN MIX: The master fader controls the overall output level of the main stereo mix.
- OUTPUT LEVEL Meter: LED meters display the output level of the main mix. Aim for levels that are strong but do not consistently peak into the red.
- НИВО НА КОНТРОЛА НА СОБАТА: Adjusts the volume for the Control Room outputs.
- ТЕЛЕФОНИ НИВО: Adjusts the volume for the Headphones output.
- ПРЕКВУЧУВАЧ ЗА НОГЕ: Input for an optional footswitch to control certain functions (e.g., FX Mute).
Одржување
- Чистење: Use a soft, dry cloth to clean the mixer's surface. Do not use abrasive cleaners, solvents, or waxes.
- Прашина: Regularly remove dust from the ventilation openings using a soft brush or compressed air.
- Knobs and Faders: Avoid applying excessive force to knobs and faders. If they become stiff or noisy, consult a qualified technician.
- Складирање: Кога не го користите подолго време, чувајте го миксерот на ладно и суво место, подалеку од директна сончева светлина и екстремни температури.
Решавање проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Нема излез на звук | Power off; cables disconnected; master fader down; channel fader down; incorrect input/output routing. | Check power, all cable connections, MAIN MIX fader, individual channel LEVEL faders, and correct input/output selection. |
| Искривен звук | Input GAIN too high; output levels too high; faulty cable. | Reduce input GAIN (ensure PEAK LED does not light up); lower MAIN MIX or channel LEVEL faders; try a different cable. |
| Без фантомска моќност | +48V switch not engaged; faulty microphone or cable. | Engage the PHANTOM POWER +48V CH1/4 switch; test with a different microphone or cable. |
| Ефектите не функционираат | FX MASTER or FX RETURN down; AUX/FX POST on channel down; FX MUTE engaged. | Increase FX MASTER and FX RETURN levels; increase AUX/FX POST on desired channels; disengage FX MUTE. |
| Проблеми со снимање/репродукција преку USB | Incorrect USB connection; driver issues (Windows); incorrect audio settings in DAW. | Ensure USB cable is securely connected; check computer's audio device settings; verify DAW input/output selection. |
Спецификации
| Карактеристика | Детал |
|---|---|
| Број на модел | F10XR |
| Број на канали | 10 |
| Влезови за микрофон | 4 (XLR, with +48V Phantom Power) |
| Линиски влезови | 2 Mono (1/4" TRS), 4 Stereo (1/4" TRS, 7/8 & 9/10 also RCA) |
| EQ (Mono Channels) | 3-band (High, Mid, Low) |
| EQ (Stereo Channels) | 2-band (High, Low) |
| Компресори | 2 (Single-knob, on channels 1 & 2) |
| Internal Effects | PRO DSP FX with 16 presets (24-bit) |
| USB аудио интерфејс | Stereo Recording and Playback (USB 2.0 Type B) |
| Главни излези | 1 Stereo (XLR + TRS) |
| Излез на контролна соба | Yes (TRS) |
| Излез за слушалки | Yes (TRS) |
| Излез AUX | 1 (TRS) |
| Тежина на ставката | 8.25 фунти (3.75 килограми) |
| Димензии на производот | 10.83 x 11.57 x 3.23 инчи |
| Извор на енергија | Електричен со кабел |
Гаранција и поддршка
For detailed warranty information, please refer to the warranty card included with your purchase or visit the official RCF website. For technical support, product registration, or service inquiries, please contact RCF customer support directly through their official channels.
Официјален претставник на RCF Webсајт: www.rcf.it
