Orbit 94884 Pocket Star Ultra 4 Station Automatic Indoor Sprinkler Timer

Вовед

The Orbit 94884 Pocket Star Ultra 4 Station Automatic Indoor Sprinkler Timer is designed to provide efficient and automated control over your irrigation system. This timer features an intuitive Easy-Set Logic programming interface, a large, easy-to-read LCD display, and a convenient dial for quick adjustments. It supports up to 4 stations, allowing for flexible watering schedules tailored to your landscape needs.

Главните карактеристики вклучуваат:

• Simple toolless 'push-in' terminals for easy wire connections.
• Large, clear LCD display, control dial, and user-friendly buttons.
• Flexible watering times from 1 to 240 minutes per station.
• Up to 8 start times per day for comprehensive scheduling.
• Integrated budgeting feature for water conservation.

Слика 1: Предна страна view of the Orbit 94884 Pocket Star Ultra Sprinkler Timer, showing the LCD display, control buttons, and programming dial.

Информации за безбедност

Please read and understand all safety instructions before installing or operating the sprinkler timer. Failure to follow these instructions may result in electric shock, fire, or property damage.

• This timer is designed for само за внатрешна употреба. Do not install it outdoors or in areas exposed to rain or direct moisture.
• Осигурајте се дека напојувањето е исклучено пред да вршите какво било поврзување или одржување.
• All electrical connections must comply with local codes and regulations. If unsure, consult a qualified electrician.
• Do not attempt to repair or modify the timer. Refer all servicing to qualified personnel.
• Keep the timer away from children and pets.

Поставување

1. Mounting the Timer

1. Choose a suitable indoor location near a standard electrical outlet, protected from direct sunlight and extreme temperatures.
2. Use the two keyhole slots on the back of the timer as a template to mark the mounting screw locations on the wall.
3. Install two screws (not included) into the wall, leaving approximately 1/8 inch (3 mm) of the screw head exposed.
4. Hang the timer on the screws, then slide it down to secure it.

2. Поврзување на вентилите за прскање

The Orbit 94884 features convenient toolless 'push-in' terminals for easy and secure wire connections. Ensure power is disconnected before wiring.

Слика 2: Внатрешно view of the Orbit 94884 Sprinkler Timer showing the wiring terminals for sprinkler valves, common wire, and sensor.

1. Locate the wiring compartment at the bottom of the timer.
2. Each sprinkler valve has two wires. Connect one wire from each valve to the common (COM) terminal. The common terminal is typically labeled and may be a different color (e.g., white or blue).
3. Connect the remaining wire from each valve to its corresponding station terminal (1, 2, 3, 4). For example, connect the wire for Zone 1 to terminal 1, Zone 2 to terminal 2, and so on.
4. If you have a pump start relay or master valve, connect one wire from it to the "PUMP" or "MV" terminal (if available, otherwise use a standard station terminal if configured as such). Connect the other wire to the common (COM) terminal.
5. To insert a wire, simply push it firmly into the designated terminal opening until it clicks into place. To remove, press the small tab next to the terminal and pull the wire out.

3. Поврзување на енергија

Plug the timer's power cord into a standard 230V AC electrical outlet. The LCD display should illuminate, indicating power is supplied.

Упатства за работа

The Orbit 94884 uses an Easy-Set Logic dial and intuitive buttons for programming.

1. Setting Current Time and Date

1. Свртете го бирачот на ДАТУМ/ЧАСОВНИК.
2. Користете го + и - копчиња за да ја поставите тековната година, потоа притиснете ENTER.
3. Repeat for month, day, hour, and minute. Ensure AM/PM is correct.
4. Свртете го бирачот на АВТОМАТСКИ кога ќе заврши.

2. Setting Start Times

The timer allows up to 8 start times per program (A or B).

1. Свртете го бирачот на ВРЕМЕ НА ПОЧЕТОК.
2. The display will show "1st START". Use + и - to set the desired start time. Press ENTER.
3. Continue setting additional start times (2nd, 3rd, etc.) as needed. To clear a start time, use + or - until "OFF" appears, then press ENTER.
4. Свртете го бирачот на АВТОМАТСКИ кога ќе заврши.

3. Setting Run Times (Station Durations)

This sets how long each station will water when activated.

1. Свртете го бирачот на ВРЕМЕ ВРЕМЕ.
2. The display will show "STATION 1". Use + и - to set the watering duration (1-240 minutes). Press ENTER.
3. Притиснете го СРЕЛКА ДЕСНО button to move to the next station (STATION 2, 3, 4) and set its run time.
4. Свртете го бирачот на АВТОМАТСКИ кога ќе заврши.

4. Setting How Often to Water (Watering Days)

You can choose specific days of the week or an interval schedule.

1. Свртете го бирачот на КОЛКУ ЧЕСТО.
2. Користете го СРЕЛКА ДЕСНО or СРЕЛКА НАЛЕВО buttons to select the desired watering days.
   • To select specific days: The day of the week will flash. Press ENTER to select or deselect the day. Move to the next day using the СРЕЛКА ДЕСНО копче.
   • To select interval watering: Continue pressing СРЕЛКА ДЕСНО until "INTERVAL" appears. Use + и - за да го поставите интервалот (на пр., на секои 2 дена).
3. Свртете го бирачот на АВТОМАТСКИ кога ќе заврши.

5. Рачно работење

За рачно наводнување на една или на сите станици:

1. Притиснете го ПРИРАЧНИК копче.
2. Користете го СРЕЛКА ДЕСНО or СРЕЛКА НАЛЕВО buttons to select the desired station to water, or select "ALL" to water all stations sequentially.
3. Притиснете ENTER to start manual watering. The display will show the remaining time.
4. За да го запрете рачното наводнување, притиснете ЈАСНО or turn the dial to ИСКЛУЧЕНО а потоа назад на АВТОМАТСКИ.

6. Одложување на дождот

To temporarily suspend watering for a period due to rain or other reasons:

1. Притиснете го ОДЛОЖУВАЊЕ НА ДОЖДОТ копче.
2. Користете го + и - buttons to select the number of days for the delay (24, 48, or 72 hours).
3. The timer will automatically resume its schedule after the delay period expires. To cancel the rain delay, press ОДЛОЖУВАЊЕ НА ДОЖДОТ повторно.

7. Seasonal Adjust / Budgeting

This feature allows you to adjust all station run times by a percentage without reprogramming each station individually.

1. Свртете го бирачот на БУЏЕТ.
2. Користете го + и - buttons to set the desired percentage (e.g., 50% for half the watering time, 120% for 20% more).
3. Свртете го бирачот на АВТОМАТСКИ кога ќе заврши.

Одржување

• Чистење: Wipe the timer's exterior with a soft, damp крпа. Не користете абразивни средства за чистење или растворувачи.
• Моќностtage: The timer has a built-in memory to retain programming during power outages. However, the clock may need to be reset if the outage е продолжено.
• Зимување: As this is an indoor timer, specific winterization for the unit itself is not required. However, ensure that any connected outdoor irrigation components (valves, pipes) are properly drained and winterized according to their respective manuals to prevent freeze damage.

Решавање проблеми

Спецификации

Гаранција и поддршка

Orbit products are manufactured to high quality standards and are backed by a limited warranty. For specific warranty details, terms, and conditions, please refer to the warranty card included with your product or visit the official Orbit webсајт.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Orbit customer support. Contact information can typically be found on the product packaging or the manufacturer's official webсајт:

Visit Orbit Support Webсајт