1. Вовед
The HELIX M SIX is a highly versatile 6-channel Class D amplifier designed for various car audio applications, including 3-way, 2-way, or small subwoofer setups. Despite its compact dimensions, it delivers robust power and features a comprehensive set of adjustments for optimal sound performance. This manual provides essential information for the proper installation, operation, and maintenance of your M SIX ampживописен.
2. Карактеристики
- Highly compact Class D amplifier with high output power of 100 Watts RMS at 4 and 2 Ohms.
- Start-Stop capability, ensuring functionality even with supply voltage drops down to 6V.
- Six-channel RCA input for flexible signal routing.
- Integrated active crossover with adjustable high-pass, low-pass, band-pass, and subsonic filters.
- 'Input Mode' switch for channels E & F, allowing flexible distribution of input signals.
- SMD (Surface Mounted Device) technology for minimal space requirements and maximum reliability.
- Exclusive, very compact design with an illuminated HELIX logo and low heat generation due to high efficiency.
3. Поставување и инсталација
Правилната инсталација е клучна за перформансите и долготрајноста на вашиот ampлифир. Препорачливо е инсталацијата да ја изврши квалификуван професионалец.
3.1 Упатства за безбедност
- Исклучете ја батеријата на возилото пред да започнете со каква било монтажна работа.
- Осигурајте се дека сите жици се правилно поставени и обезбедени за да спречите оштетување или краток спој.
- Use appropriate gauge power and ground cables.
- Инсталирајте го amplifier in a dry, well-ventilated location, away from direct sunlight or excessive heat.
3.2 Ampлафич Надview
The HELIX M SIX amplifier features a sleek, compact design. The top panel displays the HELIX logo and model name. The input and control connections are located on one end, while the power and speaker output connections are on the opposite end.
3.3 Input and Control Connections
The input side of the amplifier houses the RCA inputs for channels A through F, along with various controls for input level and crossover settings. The 'Input Mode' switch for channels E & F is also located here.
3.4 Power and Speaker Output Connections
The opposite end of the amplifier provides terminals for power input (+12V, REM, GND) and speaker outputs for all six channels. Ensure correct polarity and secure connections for all speaker wires.
4. Работа и контроли
4.1 Прилагодување на нивото на влезот
Adjust the 'INPUT LEVEL' controls for each channel pair (A/B, C/D, E/F) to match the output voltage of your head unit. Start with the level set to minimum and gradually increase until a clean, undistorted sound is achieved at high volume levels from your head unit.
4.2 Поставки за кросовер
The M SIX features an integrated active crossover with adjustable filters for precise sound tuning:
- Високопропусен филтер (HPF): Allows frequencies above the set point to pass through. Adjustable from 15 Hz to 4,000 Hz.
- Нископропусен филтер (LPF): Allows frequencies below the set point to pass through. Adjustable from 40 Hz to 4,000 Hz.
- Band-Pass Filter: Achieved by combining HPF and LPF settings, allowing a specific range of frequencies to pass. Adjustable from 15 Hz to 4,000 Hz.
- Субсоничен филтер: A high-pass filter specifically for subwoofers, typically set below the audible range to protect the speaker from damaging low frequencies. Adjustable from 15 Hz to 4,000 Hz.
The slope for high-pass and low-pass filters is 12 dB/Octave.
4.3 Input Mode Switch (Channels E & F)
The 'Input Mode' switch for channels E & F allows flexible signal distribution. Refer to the amplifier's control panel (Figure 2) for specific settings and their functions, which typically include options like stereo, summed, or full-range input for these channels.
5. Технички спецификации
| RMS Power (≤ 1% THD+N) @ 4 Ohm | 6 х 100 вати |
| RMS Power (≤ 1% THD+N) @ 2 Ohm | 6 х 100 вати |
| Bridged Power @ 4 Ohm | 3 х 200 вати |
| Max. Power per Channel* | Up to 130 Watts RMS @ 4 / 2 Ohm |
| Ampпожива технологија | Класа Д |
| Влезови | 6 x RCA, 1 x Remote In |
| Чувствителност на влезот RCA | 0.5 - 6 волти |
| RCA влезна импеданса | 20 kOhm |
| Излези | 6 x Излез на звучник |
| Фреквентен одговор | 10 Hz - 30,000 Hz |
| Филтер со висок премин | 15 Hz - 4,000 Hz adjustable |
| Нископропусен филтер | 40 Hz - 4,000 Hz adjustable |
| Band-Pas филтер | 15 Hz - 4,000 Hz adjustable |
| Subsonic Filter / HPF | 15 Hz - 4,000 Hz adjustable |
| Slope High- / Low-Pass | 12 dB/окт. |
| Signal-to-Noise Ratio (Analog Input) | 98 dB (А-пондерирана) |
| Вкупно хармонично изобличување (THD) | 0.05 % |
| DampИнг Фактор | 100 |
| Оперативен волtage | 10.5 - 16 Volts (max. 5 sec. down to 6 Volts) |
| Неактивна потрошувачка на струја | 1,550 mA |
| Опсег на работна температура | -40°C до +70°C |
| Осигурувач | 2 x 35 A Maxi Blade Fuse (FK3) |
| Потрошувачка на енергија | DC 12 V Δ 80 A max. |
| Димензии (В x Ш x Д) | 50 x 320 x 154 mm |
* In typical multi-channel applications (2- / 3-way system + Rear + Subwoofer)
6. Одржување
The HELIX M SIX amplifier is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure optimal performance:
- Чистење: Периодично чистете го ampИзбришете ја надворешноста на ладилникот со мека, сува крпа. Избегнувајте употреба на јаки хемикалии или абразивни средства за чистење.
- Вентилација: Обезбедете дека на amplifier's cooling fins are free from dust and debris to maintain proper heat dissipation. Do not obstruct airflow around the unit.
- Врски: Повремено проверувајте ги сите приклучоци за напојување, заземјување, далечинско управување и звучници за да се осигурате дека се безбедни и без корозија.
7 Смена на проблеми
If you experience issues with your HELIX M SIX amplifier, consult the following common troubleshooting steps:
- Без моќност: Check the main fuse in the vehicle's power line and the fuses on the amplifier itself. Verify all power and ground connections are secure. Ensure the remote turn-on wire is receiving +12V when the head unit is on.
- Нема звук: Check all RCA input cables for proper connection and integrity. Verify speaker wire connections and ensure no shorts exist. Confirm the head unit is sending an audio signal.
- Искривен звук: Reduce the input level gain on the amplifier. Check for proper crossover settings. Ensure speaker impedance matches the amplifier's capabilities. Inspect speaker wires for damage or shorts.
- Protection Mode (PROTECT LED on): This indicates an internal fault, overheating, or a short circuit in the speaker wiring. Turn off the system, check speaker wiring for shorts, allow the amplifier to cool down, and then restart. If the issue persists, seek professional assistance.
8. Содржина на пакетот
The HELIX M SIX ampПакетот за лагер вклучува:
- 1 x HELIX M SIX Ampживописен
- 1 x Mounting Material (screws, etc.)
- 1 x Упатство за употреба (овој документ)
9. Гаранција и поддршка
HELIX products are covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official HELIX website for detailed warranty terms and conditions. For technical support or service inquiries, contact your authorized HELIX dealer or the HELIX customer service department.
