Tasmor 32.8ft 5050 RGB LED Strip Lights User Manual

1. Вовед

Thank you for choosing Tasmor 32.8ft 5050 RGB LED Strip Lights. This product is designed to provide dynamic and customizable lighting for various indoor and outdoor settings. Featuring 16 color options, music synchronization, and remote control functionality, these LED strips offer versatile illumination. Please read this manual thoroughly before installation and use to ensure proper operation and safety.

2. Содржина на пакетот

Проверете дали сите компоненти се присутни во вашето пакување:

• 2 x 16.4ft (5m) LED Strip Lights (Total 32.8ft / 10m)
• 1 x далечински управувач
• 1 x Set of Adapters (Power Adapter and IR Receiver)
• 1 x Упатство за употреба

Слика 2.1: Ставката завршиview. This image displays the complete contents of the Tasmor LED Strip Lights package, including two rolls of 16.4ft LED strips, the remote control, the power adapter, and the IR receiver.

3. Информации за безбедност

• Уверете се дека напојувањето е исклучено пред инсталацијата или одржувањето.
• Use only the provided power adapter. Using an incompatible adapter may damage the product or pose a safety risk.
• Do not connect the LED strips directly to mains voltage without the adapter.
• Avoid bending the LED strips sharply, as this can damage the circuit board or LEDs.
• While the LED strips are IP65 waterproof, the power adapter and IR receiver are not. Ensure these components are protected from water exposure, especially during outdoor use.
• The LED strips generate low heat and are safe to touch.
• Да се ​​чува подалеку од дофат на деца.

4. Поставување и инсталација

Следете ги овие чекори за правилна инсталација:

1. Подгответе ја површината: Clean and dry the surface where you intend to install the LED strips. Ensure it is smooth and free of dust or grease for optimal adhesion.
2. Мерење и сечење (опционално): If necessary, measure the desired length for your installation. The LED strips can be cut at designated marks (usually indicated by a copper pad and scissor icon). Cut only along these marks to avoid damaging the circuit.
3. Нанесете ја лентата: Peel off the protective backing from the adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm contact along its entire length. For enhanced adhesion, especially on textured or uneven surfaces, consider using additional mounting clips or double-sided tape.
4. Поврзување на компоненти: Connect the LED strips to the IR receiver, and then connect the IR receiver to the power adapter. Ensure all connections are secure. The product supports parallel connection for two strips.

Слика 4.1: Product Presentation. This image illustrates key features of the LED strip, including its cuttable design, self-adhesive backing, IP65 waterproof rating, and the use of SMD 5050 LED bulbs.

Слика 4.2: Parallel Connection. This diagram shows how to connect two LED strip rolls to a single IR receiver and power adapter for extended coverage.

5. Вклучување: Plug the power adapter into a standard electrical outlet. The LED strips should illuminate.

5. Упатства за работа

Control your LED strip lights using the included remote control.

Слика 5.1: Remote Control. This image details the layout and functions of the RGB controller, including 16 level brightness adjustment, 4 timing settings, 4 music modes, and 3/7 color jump/fade modes.

5.1 Функции на далечинскиот управувач

• Вклучување/исклучување: Притиснете го Моќ копче за вклучување или исклучување на светлата.
• Избор на боја: Изберете од 16 статични бои користејќи ги наменските копчиња за боја.
• Прилагодување на осветленоста: Користете го V+ и V- buttons to increase or decrease the brightness (16 levels available).
• Режими на осветлување: Select from 4 dynamic lighting modes (e.g., Flash, Strobe, Fade, Smooth) using the corresponding buttons.
• Музички режими: Activate one of the 4 music synchronization modes. The lights will change color and intensity based on ambient sound.
• Поставки за време: Set the lights to automatically turn off after 30, 60, 90, or 120 minutes using the timer buttons.

5.2 Music Mode Operation

The built-in high-sensitivity microphone allows the LED strips to respond to sound, creating a dynamic lighting experience synchronized with music or voice.

• Ensure the IR receiver (which contains the microphone) is not obstructed and is placed in an area where it can pick up sound effectively.
• Select one of the 4 music modes on the remote control.
• The lights will adapt their colors and patterns to the rhythm and melody of the music.

Слика 5.2: Music Mode. This image illustrates the LED strip lights responding to sound, creating a vibrant and synchronized lighting display in different environments.

5.3 Timing and Energy-Saving

Utilize the timing function to conserve energy and manage your lighting schedule.

• Press the 30min, 60min, 90min, or 120min button on the remote to set an automatic shut-off timer.
• The lights will turn off after the selected duration, promoting energy efficiency.

Слика 5.3: Timing & Energy-saving. This image demonstrates the energy-efficient nature of the LED lights and the convenience of the timing functions.

6. Одржување

• Чистење: Gently wipe the LED strips with a dry, soft cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
• Врски: Periodically check all connections (strip to receiver, receiver to adapter) to ensure they are secure and free from corrosion.
• Складирање: If storing the LED strips, ensure they are coiled loosely and kept in a dry, cool place away from direct sunlight.

7 Смена на проблеми

8. Спецификации

• Бренд: Тасмор
• Број на модел: 748323798395
• Тип на светлина: ЛЕД Светло за лента
• Тип на LED: SMD 5050 RGB
• Вкупна должина: 32.8ft (10m) - 2 x 16.4ft rolls
• Боја: RGB (Red, Green, Blue) - Multicolor
• Посебни карактеристики: Dimmable, Music Sync, Timing Function
• Извор на енергија: Електричен со кабел
• Водоотпорна оцена: IP65 (for LED strips only; adapter and receiver are not waterproof)
• Внатрешна/надворешна употреба: Primarily designed for indoor use, but LED strips can be used outdoors with proper protection for non-waterproof components.
• Димензии на пакетот: 17.5 x 16.99 x 7.11 cm
• Тежина на пакетот: 621 гр

9. Гаранција и поддршка

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Tasmor webстраница. Чувајте ја сметката за купување како доказ за купување.