BFT Phobos BT A40 (Model 2611950)

BFT Phobos BT A40 Automatic Double Swing Gate Operator User Manual

Model: Phobos BT A40 (Model 2611950)

1. Вовед

This manual provides detailed instructions for the installation, operation, and maintenance of the BFT Phobos BT A40 automatic double swing gate operator. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Complete BFT Phobos BT A40 automatic double swing gate operator kit including actuators, control panel, remote controls, photocells, and flashing lamp.

Слика 1: Готовоview of the BFT Phobos BT A40 Kit Components.

2. Информации за безбедност

Секогаш почитувајте ги следниве безбедносни мерки за да спречите повреда или оштетување на опремата:

  • Инсталацијата мора да ја изврши квалификуван персонал во согласност со локалните прописи.
  • Disconnect power before performing any maintenance or installation work.
  • Држете ги децата и домашните миленици подалеку од областа на портата за време на работата.
  • Do not operate the gate if any part is damaged or malfunctioning.
  • Осигурајте се дека сите безбедносни уреди (фотоќелии, итно сопирање) се правилно инсталирани и функционираат.
  • In case of power failure, use the provided emergency release keys to manually open the gate.

3. Вклучени компоненти

The BFT Phobos BT A40 kit typically includes the following components:

  • 2 x BFT PHOBOS BT A40 electromechanical actuators with fixings.
  • 1 x BFT THALIA LIGHT control panel with integrated radio receiver (memory for 63 manual transmitters).
  • 1 x Control panel housing (hermetic).
  • 3 x BFT MITTO B4 4-channel remote controls.
  • 1 x BFT Radius LED BT A R1 flashing lamp со антена.
  • 1 x Pair of BFT Compacta A20-180 pivoting photocells (transmitter and receiver).
  • 4 x Keys for emergency gate opening in case of power failure.
  • Mounting brackets for posts and gate leaves.
  • Various small parts and accessories for installation (e.g., nuts, bolts, seals).
Various small parts and accessories for the BFT gate operator installation, including nuts, bolts, and seals.

Figure 2: Small Parts and Accessories.

4. Поставување и инсталација

This section outlines the general steps for installing the BFT Phobos BT A40 system. Professional installation is highly recommended.

4.1 Инсталација на актуатор

Install the two BFT PHOBOS BT A40 electromechanical actuators on each gate leaf. Ensure the mounting brackets are securely fastened to both the gate post and the gate leaf. The maximum distance between the edge of the post and the hinge axis should be up to 8 cm.

Two BFT PHOBOS BT A40 electromechanical actuators and the BFT THALIA LIGHT control unit.

Figure 3: BFT PHOBOS BT A40 Actuators and THALIA LIGHT Control Unit.

Metal mounting brackets for attaching the gate operator to the gate and post.

Figure 4: Mounting Brackets.

The magnetic limit switch system ensures maximum operating precision and very easy and quick adjustment. The integrated adjustable limit switch means there is no need to use bumpers screwed to the ground.

4.2 Control Panel Installation

Mount the BFT THALIA LIGHT control panel in its hermetic housing in a protected location, typically near the gate. Connect the actuators, power supply, and all safety devices to the control panel according to the wiring diagram provided in the full installation manual (not included in this summary).

4.3 Инсталација на фотоќелија

Install the BFT Compacta A20-180 pivoting photocells on opposite sides of the gate opening, ensuring they are aligned. These photocells provide a safety barrier, preventing the gate from closing if an obstruction is detected.

A pair of BFT Compacta A20-180 pivoting photocells.

Figure 5: BFT Compacta A20-180 Pivoting Photocell Pair.

4.4 Flashing Lamp Инсталација

Mount the BFT Radius LED BT A R1 flashing lamp in a visible location. This lamp provides a visual warning when the gate is in motion.

A BFT Radius LED BT A R1 flashing lamp with integrated antenna.

Figure 6: BFT Radius LED BT A R1 Flashing Lamp.

5. Упатства за работа

The BFT Phobos BT A40 system is designed for automatic operation of double swing gates.

5.1 Ракување со далечински управувач

Use the BFT MITTO B4 4-channel remote controls to operate the gate. Each button can be programmed for different functions (e.g., open/close both leaves, open/close single leaf, pedestrian access). Refer to the control panel manual for remote control programming instructions.

Three BFT MITTO B4 4-channel remote controls.

Figure 7: BFT MITTO B4 Remote Controls.

5.2 Автоматско работење

Once activated, the gate will open or close automatically. The D-TRACK technology ensures complete application safety by optimally selecting the necessary forces at each point of the automation's operation. The system will detect obstructions via the photocells and reverse or stop to prevent damage or injury.

5.3 Emergency Manual Release

In the event of a power failure, use the provided emergency keys to manually unlock and open the gate. Insert the key into the actuator's release mechanism and turn it as indicated in the actuator's specific manual.

6. Одржување

Regular maintenance ensures the longevity and reliable operation of your BFT gate operator.

  • Месечно: Check the gate's movement for any unusual noises or resistance. Ensure the photocells are clean and unobstructed. Test the safety features.
  • Квартално: Inspect all mounting points and fasteners for tightness. Check the condition of the actuator's screw nut; the modernized design (deeper screw nut) reduces the possibility of accidental contamination of the mechanism, but regular inspection is still advised.
  • Годишно: Have the system inspected by a qualified technician.
  • Keep the area around the gate clear of debris and vegetation.

7 Смена на проблеми

Овој дел се однесува на вообичаени проблеми со кои може да се соочите. За сложени проблеми, контактирајте квалификуван техничар.

ПроблемМожна причинаРешение
Портата не реагира на далечинскиот управувач.Dead remote battery, remote out of range, power failure, remote not programmed.Replace battery, move closer to gate, check power supply, reprogram remote.
Gate stops or reverses during closing.Obstruction detected by photocells, D-TRACK system detecting unusual resistance.Clear obstruction from photocell path, clean photocells, check gate for physical obstructions or binding.
Трепка lamp не работи.Lamp bulb faulty, wiring issue.Check connections, replace lamp доколку е потребно.
Портата работи бавно или со тешкотии.Низок волуменtage, mechanical friction, actuator issue.Check power supply, lubricate gate hinges, contact technician.

8. Спецификации

Key technical specifications for the BFT Phobos BT A40 system:

  • Модел: Phobos BT A40
  • Производител: BFT
  • Тип на активатор: 24V Electromechanical irreversible drive
  • Максимална должина на крилото на вратата: Up to 4 meters (13.1 ft) per leaf
  • Максимална тежина на крилото на вратата: Up to 250 kg (551 lbs) per leaf
  • Димензии на производот (Д x Ш x В): 26 x 18 x 14 cm (10.2 x 7.1 x 5.5 инчи)
  • Тежина на производот: 2.21 кг (4.87 фунти)
  • Боја: Сребрена
  • Референтен број: OGBBFTADB0037
  • Број на модел на артикл: 2611950
Technical drawing showing dimensions of BFT Phobos BT A25 and A40 actuators with a table of measurements.

Figure 8: Actuator Dimensions (Phobos BT A40 relevant).

9. Гаранција и поддршка

Information regarding product warranty and availability of spare parts is not explicitly provided in this manual. Please refer to your purchase documentation or contact your BFT dealer for details on warranty coverage and spare parts availability.

Поврзани документи - Phobos BT A40 (Model 2611950)

Предview Прирачник за инсталација на клипни автоматизации BFT Phobos BT A25/A40 за нишалки
Сеопфатно упатство за инсталација за клипни автоматизации BFT Phobos BT A25 и A40 за нишачки порти. Опфаќа безбедносни упатства, технички спецификации, дијаграми за инсталација, ожичување и одржување.
Предview BFT Phobos BT Kit UL - брз водич
Краток водич за системот за автоматско отворање порти BFT Phobos BT Kit UL, кој опфаќа инсталација, ожичување, програмирање и решавање проблеми.
Предview Прирачник за инсталација BFT THALIA: Quadro Comandi по Automazione Cancelli
Ова е водичотtagLiata illustra l'installazione e la configurazione del quadro Commandi BFT THALIA, progettato per l'automazione di cancelli e porte. Вклучете ја специфичната техника, шемата за колегаментот и оперативниот систем за гаранција и ефикасно функционирање.
Предview BFT GIUNO ULTRA BT A20 / GIUNO ULTRA BT A50 Piston Automation Installation Manual
Comprehensive installation manual for the BFT GIUNO ULTRA BT A20 and GIUNO ULTRA BT A50 hydraulic piston automations for swing gates. Covers technical specifications, mounting, wiring, adjustments, and safety precautions.
Предview Инсталација и упатство за користење на BFT ELI BT A35 V / ELI BT A40 и ELI AC A35 V / ELI AC A40
Сеопфатен водич за инсталација и употреба на електромеханички актуатори BFT ELI BT A35 V, ELI BT A40, ELI AC A35 V и ELI AC A40 за нишалки. Опфаќа безбедносни упатства, процедури за инсталација, технички податоци и одржување.
Предview Упатство за инсталација на автоматизација на подвижна порта BFT VIRGO
Сеопфатно упатство за инсталација и користење на системот за автоматизација на подвижни порти BFT VIRGO, кое опфаќа безбедност, технички спецификации, процедури за инсталација, програмирање и одржување.