ECOELER Motion Sensor Light Switch User Manual

Вовед

This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER Motion Sensor Light Switch, Model YM2108. This device is designed to provide automatic lighting control in various indoor spaces such as laundry rooms, garages, hallways, and closets, enhancing convenience and energy efficiency.

Image: The ECOELER Motion Sensor Light Switch, Model YM2108, shown installed in a modern bathroom setting, highlighting its compliance with UL, FCC, and California Title 24 standards.

Клучни карактеристики

• Ракување без раце: Detects presence to automatically activate lights, eliminating the need for manual switching.
• Потребна е неутрална жица: Ensures stable performance; designed for single-pole installations only, not for 3-way circuits.
• Occupancy (OCC) & Vacancy (VAC) Modes:
  • OCC Mode: Lights turn on automatically with motion and off when the space is unoccupied.
  • VAC Mode: Requires manual activation, then turns off automatically when no motion is detected.
• Приспособливи поставки: Adjustable time delays, sensitivity, and ambient light level sensing for tailored control.
• High Quality & Compliance: UL Certified, FCC Listed, and California Title 24 Compliant.
• Широка компатибилност: Works with 300W LED, 300W CFL, and 600W incandescent light bulbs.

Image: Visual representation of the hands-free control feature, showing the motion sensor light switch seamlessly integrated into different living spaces.

Водич за инсталација

WARNING: Installation should only be performed by a qualified electrician to ensure safety and compliance with local electrical codes. Always turn off power at the circuit breaker before installation.

The ECOELER Motion Sensor Light Switch (Model YM2108) requires a neutral wire for proper operation. It is designed for single-pole applications only and is not compatible with 3-way circuits.

Инструкции за поврзување:

1. Исклучете го напојувањето на прекинувачот.
2. Отстранете ја постојната ѕидна плоча и прекинувач.
3. Identify the wires in your electrical box: Hot (Black), Load (Red), Neutral (White), and Ground (Green or bare copper).
4. Connect the wires from the ECOELER switch to your house wiring according to the diagram below. Use the provided terminal caps to secure connections.
5. Carefully push the wired switch into the electrical box.
6. Прицврстете ја ѕидната плоча.
7. Вратете го напојувањето на прекинувачот.

Image: A clear wiring guide illustrating the connections for the Hot (Black), Load (Red), Neutral (White), and Ground (Green) wires for the YM2108 switch.

Операција

The ECOELER Motion Sensor Light Switch offers two primary operation modes and several customizable settings to suit your specific needs.

Режими на работа:

• Occupancy Mode (OCC): In this mode, the lights will automatically turn ON when motion is detected and automatically turn OFF after a set delay when no motion is detected. This is ideal for high-traffic areas where automatic lighting is desired.
• Vacancy Mode (VAC): In this mode, the lights must be turned ON manually. They will then automatically turn OFF after a set delay when no motion is detected. This mode is suitable for areas where manual control for turning on the light is preferred, but automatic turn-off is desired for energy saving.

Image: An illustration detailing the Occupancy (Auto on & off) and Vacancy (Manual on & Auto off) modes, with a switch to select between them.

Приспособливи поставки:

The switch features three adjustable dials to fine-tune its performance:

• TIME (Adjustable Delay Time): Sets how long the lights remain ON after the last detected motion. Adjustable from 15 seconds (TEST) to 30 minutes.
• SENSE (Sensor Sensitivity Range): Adjusts the detection range of the motion sensor. Settings range from 1 (approx. 6.56 ft) to 5 (approx. 29.52 ft).
• СВЕТЛИНА (Ниво на амбиентално осветлување): Determines the ambient light level at which the sensor will activate the lights. Settings range from 1 (5 lux) to 5 (all day, meaning it will activate regardless of ambient light).

Слика: Детална view of the customizable settings on the ECOELER Motion Sensor Light Switch, including dials for Time Delay, Sensitivity, and Ambient Light Level.

Одржување

The ECOELER Motion Sensor Light Switch requires minimal maintenance. Periodically, gently wipe the sensor lens and switch surface with a soft, dry cloth to remove dust or debris that may interfere with sensor performance. Do not use abrasive cleaners or solvents.

Решавање проблеми

If you experience issues with your ECOELER Motion Sensor Light Switch, consider the following:

• Lights not turning on/off automatically: Verify the selected operation mode (OCC/VAC) and adjust the 'SENSE' (sensitivity) and 'LIGHT' (ambient light level) settings. Ensure there are no obstructions blocking the sensor's field of view.
• Lights turning off too quickly or staying on too long: Adjust the 'TIME' dial to increase or decrease the delay time.
• Lights not turning on at all: Check the circuit breaker to ensure power is supplied to the switch. Confirm that the wiring connections are secure and correct, especially the neutral wire. Test the connected light bulb to ensure it is functional.

Спецификации

Image: A visual summary of the product specifications and a list of included accessories such as the wall plate, screws, and terminal caps.

Гаранција и поддршка

The ECOELER Motion Sensor Light Switch (Model YM2108) comes with a 1-годишна Ограничена гаранција. This warranty covers manufacturing defects under normal use conditions. In the event of a defect, a replacement or refund may be available.

For warranty claims or technical support, please contact the seller (ECOELER ELECTRIC INC) directly via Amazon for assistance.