1. Вовед
This manual provides instructions for the installation, operation, and maintenance of the Danfoss DEVIwet #088U2001 Temperature Controller. This device is designed for precise temperature regulation, featuring a clear DEVI DEVIWET display for user interaction.
2. Информации за безбедност
Please read these safety instructions carefully before installing or operating the device. Failure to follow these instructions may result in property damage, injury, or death.
- Инсталацијата мора да ја изврши квалификуван електричар во согласност со локалните електрични прописи и прописи.
- Пред каква било инсталација, одржување или поправка, осигурајте се дека напојувањето е исклучено.
- Не го изложувајте уредот на влага или екстремни температури.
- Не обидувајте се сами да го отворите или поправите уредот. Контактирајте квалификуван сервисер.
- Чувајте ги материјалите за пакување подалеку од деца.
3. Производот завршиview
The DEVIwet #088U2001 is a wall-mounted temperature controller with a digital display and touch controls. It is designed for accurate temperature management in various environments.

Слика 1: Предна страна view of the Danfoss DEVIwet #088U2001 Temperature Controller. The device is white, square, and features a central digital display showing "21.5°" with up/down arrows and a heating icon. A back arrow and the DEVI logo are also visible.

Слика 2: The Danfoss DEVIwet #088U2001 Temperature Controller mounted on a light grey wall. This image provides a perspective of the device's size and appearance in a typical installation setting.

Слика 3: Крупен кадар view of the DEVIwet #088U2001's digital display. The display shows "21.5°" in red, along with touch-sensitive up and down arrows, a heating symbol, and a back arrow. The DEVI logo is located at the bottom right of the display area.
Клучни карактеристики:
- Original DEVI DEVIWET display
- Интерфејс за контрола на допир
- Battery-powered operation (also supports 230V)
- LCD дисплеј со позадинско осветлување
4. Поставување и инсталација
This section outlines the general steps for setting up your DEVIwet #088U2001 Temperature Controller. For detailed wiring diagrams and specific installation requirements, refer to the separate installation guide provided with the product or consult a qualified electrician.
4.1 Напојување
The device can be powered by batteries or connected to a 230 Volts AC power supply. Ensure the correct power source is used and all connections are secure.
- Инсталација на батерија: Open the battery compartment (typically on the rear or side) and insert the required batteries, observing polarity.
- Жична врска: Connect the 230V power supply wires to the designated terminals inside the unit. This step requires professional installation.
4.2 Монтирање
Mount the controller on a flat, vertical surface, away from direct sunlight, drafts, or heat sources that could affect temperature readings. Use appropriate screws and wall plugs for secure mounting.
5. Упатства за работа
The DEVIwet #088U2001 features a user-friendly touch control interface and an LCD display.
5.1 Прикажи надview
The LCD display shows the current temperature, set temperature, heating status, and other operational indicators. The backlight activates upon touch for improved visibility.
5.2 Поставување температура
- Touch the display to activate the backlight and controls.
- Користете го Up (⌃) и Долу (⌄) arrows on the screen to adjust the desired temperature.
- The new set temperature will be saved automatically after a few seconds of inactivity, or you can press the Назад (↶) arrow to confirm and exit.
5.3 Индикатор за греење
A heating symbol (≈) will appear on the display when the controller is actively calling for heat to reach the set temperature.
6. Одржување
Regular maintenance ensures optimal performance and longevity of your temperature controller.
6.1 Чистење
Избришете го екранот и casing со мека, сува или малку дamp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and internal components.
6.2 Замена на батеријата
If the device is battery-powered, replace batteries when the low battery indicator appears on the display. Use only the specified battery type. Dispose of old batteries responsibly.
7 Смена на проблеми
If you encounter issues with your DEVIwet #088U2001, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Екранот е празен или не реагира. | Нема струја или се празни батерии. | Check power supply connection or replace batteries. |
| Отчитувањето на температурата се чини неточно. | Controller located near heat/cold source or draft. | Relocate the controller to a more representative area. Ensure proper sensor connection if external sensor is used. |
| Системот за греење не реагира. | Wiring issue, heating system fault, or set temperature is below ambient. | Verify wiring connections. Check the heating system's power and functionality. Increase the set temperature above the current room temperature. |
Ако проблемот продолжи откако ќе се обидете со овие решенија, контактирајте квалификуван сервисер.
8. Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | ДЕВИ |
| Број на модел | DEVIwet #088U2001 |
| Димензии (Д x Ш x В) | 19 x 12 x 12 cm |
| Тежина | 81.65 грама |
| Voltage | 230 волти |
| Извор на енергија | Напојува со батерија |
| Посебни карактеристики | Touch Control, Battery Operated, Backlight |
| Тип на дисплеј | LCD екран |
| Тип на контролер | Push-button, Touchpad Control |
9. Гаранција и поддршка
Information regarding product warranty and specific support contacts is not available in the provided product data. Please refer to the documentation included with your purchase or visit the official DEVI webстраница за детали за гаранцијата и опции за поддршка на корисници.





