Вовед
This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.
The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.
Информации за безбедност
Секогаш придржувајте се до следните безбедносни упатства за да спречите електричен удар, пожар или повреда:
- Уверете се дека напојувањето е исклучено пред инсталацијата или одржувањето.
- Инсталацијата треба да ја изврши квалификуван електричар во согласност со локалните електрични прописи.
- Не го изложувајте лamp до прекумерна влага или екстремни температури.
- Не обидувајте се да го отворите или измените lamp housing, as this may void the warranty and pose a safety risk.
- Чувајте ги материјалите за пакување подалеку од деца.
Содржина на пакетот
Проверете дали сите компоненти се присутни и неоштетени:
- Beghelli 19432 LED Emergency Lamp единица
- Integrated Li-Fe Battery
- Додатоци за монтирање (завртки, ѕидни приклучоци)
- Упатство за употреба (овој документ)
Поставување и инсталација
The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:
- Изберете локација: Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
- Подгответе ја површината за монтирање: Ensure the wall surface is clean, dry, and capable of supporting the lampтежината на.
- Означете ги точките за дупчење: Користете го lamp's mounting holes as a template to mark the drilling points on the wall.
- Дупчете дупки: Drill holes at the marked points using an appropriate drill bit for the wall plugs.
- Вметнете ги ѕидните приклучоци: Вметнете ги обезбедените ѕидни приклучоци во дупчените дупки.
- Монтирајте го Lamp: Обезбедете го lamp to the wall using the provided screws. Ensure it is firmly attached.
- Поврзете напојување: Поврзете го lamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
- Почетна наплата: After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.

Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.
Упатства за работа
The Beghelli 19432 operates automatically:
- Нормално работење: When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
- Режим за итни случаи: Во случај на прекин на електричната енергија, лamp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
- Враќање во нормала: Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
- Test Button (if applicable): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)
Одржување
Regular maintenance ensures the longevity and reliability of your emergency lamp:
- Чистење: Исчистете го лampИзбришете ја надворешноста со мека, сува крпа. Не користете абразивни средства за чистење или растворувачи.
- Проверка на батеријата: Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
- Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
- Замена на батерија: The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
- Lamp Замена: The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.
Решавање проблеми
Погледнете ја табелата подолу за вообичаени проблеми и нивни решенија:
| Проблем | Можна причина | Решение |
|---|---|---|
| Lamp does not illuminate during power outage. | Батеријата не е наполнета или е неисправна. Неправилно ожичување. Lamp вина. | Обезбедете лamp has been connected to power for at least 24 hours. Проверете ги поврзувањата на жици. Доколку проблемот продолжи, контактирајте квалификуван сервисен персонал. |
| Lamp останува постојано вклучен. | Main power supply issue. Внатрешна грешка. | Verify main power supply is stable. Disconnect and reconnect power. If issue persists, contact qualified service personnel. |
| Reduced illumination duration. | Деградација на батеријата. Недоволно полнење. | Perform annual full discharge/recharge cycle. Ensure continuous power supply for charging. Battery may need replacement by qualified personnel. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Beghelli customer support.
Спецификации
| Карактеристика | Детал |
|---|---|
| Број на модел | 19432 |
| Бренд | Бегели |
| Извор на светлина | LED |
| Светлосен флукс | 1200 лумени |
| Потрошувачка на енергија | 24 вати |
| Тип на батерија | Li-Fe (Lithium Iron) |
| Материјал | Policarbonato (Polycarbonate) |
| Боја | Бело |
| Област на апликација | Commercial, Emergency Exit |
| Тип на монтирање | Wall Mount (Parete) |
| Тип на прекинувач | Автоматски |
| Прво достапно | 16 мај 2019 година |
Гаранција и поддршка
For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.
For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli webна локацијата или на пакувањето на производот.
Информации за рециклирање: For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp recycling and disposal of broken or damaged lamps can often be found on the manufacturer's website or through local waste management services.





