Вовед
This manual provides detailed instructions for the installation, operation, and maintenance of the Kicker 46KISLOC2 K-Series Stereo Line-Output Converter. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
The Kicker 46KISLOC2 is designed to integrate aftermarket amplifiers with factory car audio systems by converting speaker-level signals into high-quality RCA line-level signals. It also provides a remote turn-on output for ampказните за слободни животи.
Клучни карактеристики
- Converts speaker-level signals to RCA line-level signals.
- Provides a powerful 100 milli-amp, 12-volt remote turn-on output using DC offset, eliminating the need for a separate switched 12V source.
- Accepts input signals up to 55 watts (16 volts).
- Delivers an output signal up to 8 volts.
- Maintains a flat 20Hz-20kHz frequency response at all volume levels.
- Compatible with standard radios and most smart radios (amplifier output of smart radio must have 60Ω impedance or lower).
- Features an LED indicator for DC offset turn-on.
Содржина на пакетот
Проверете дали сите артикли се присутни во пакувањето:
- Kicker 46KISLOC2 Line-Output Converter unit
- Упатство за употреба (овој документ)
Информации за безбедност
ПРЕДУПРЕДУВАЊЕ:
- Секогаш исклучувајте ја батеријата на возилото пред да изведувате какви било електрични работи.
- Ensure proper wiring and connections to prevent short circuits or damage to the unit or vehicle's electrical system.
- Консултирајте се со професионален инсталатер на аудио системи за автомобили ако не сте сигурни за некои чекори за инсталација.
- Не го изложувајте уредот на влага или екстремни температури.
Поставување и инсталација
The KISLOC2 is designed for straightforward installation. Follow these steps carefully:
Дијаграм за поврзување
Refer to the diagram below for proper wiring connections. The KISLOC2 features input wires for speaker signals and output RCA jacks for line-level signals, plus a remote turn-on wire.
Image: Detailed wiring diagram for the Kicker 46KISLOC2, showing input wires (White: L+, White/BLK: L-, Grey: R+, Grey/BLK: R-, Black: Chassis Gnd) and output connections (Blue: 12V Remote out (100mA), RCAx2: Line level out). A red LED indicates DC offset turn-on activity.
Чекори за поврзување
- Identify Speaker Wires: Locate the speaker wires from your factory radio or amplifier that you intend to use as input for the KISLOC2. Typically, these are the rear speaker wires for subwoofer applications or full-range speakers for multi-channel ampпоставки за лагер.
- Поврзете ги влезните жици:
- Поврзете го Бело wire to the Left (+) speaker wire.
- Поврзете го Бело/Црно wire to the Left (-) speaker wire.
- Поврзете го Греј wire to the Right (+) speaker wire.
- Поврзете го Сиво/Црно wire to the Right (-) speaker wire.
- Поврзете го Црното wire to a reliable chassis ground point in the vehicle.
- Поврзете RCA излези: Plug your RCA cables from the KISLOC2's RCA output jacks into the RCA input jacks of your aftermarket ampживописен.
- Connect Remote Turn-On: Поврзете го Сино wire from the KISLOC2 to the remote turn-on input of your aftermarket amplifier(s). This wire provides a 12V signal to turn on the amplifier when the factory radio is active.
- Обезбедете ја единицата: Mount the KISLOC2 in a secure, dry location away from excessive heat or moisture. Ensure wires are not pinched or exposed to sharp edges.
Слика: напред view of the Kicker 46KISLOC2 Line-Output Converter, showing the main unit with multiple colored wires extending from one end and two RCA output jacks on the other end. The KICKER logo is visible on the top surface.
Слика: Под агол view of the Kicker 46KISLOC2 Line-Output Converter, showcasing the compact black housing, the array of input wires, and the dual RCA output ports. The KICKER branding is visible on the top surface.
Операција
Once properly installed, the KISLOC2 operates automatically. It senses the audio signal from your factory radio and converts it to a line-level signal for your amplifier. The integrated DC offset detection activates the remote turn-on output.
- Вклучување: When your factory radio is turned on, the KISLOC2 will detect the DC offset in the speaker signal and activate its remote turn-on output (blue wire), signaling your amplifier to turn on. A red LED on the unit will illuminate to indicate active DC offset turn-on.
- Аудио излез: The converted line-level audio signal will be sent through the RCA outputs to your ampживописен.
- Исклучено: When the factory radio is turned off, the KISLOC2 will cease to detect the DC offset, and the remote turn-on output will deactivate, turning off your ampживописен.
Одржување
The Kicker 46KISLOC2 is designed for maintenance-free operation. No user-serviceable parts are inside. To ensure longevity:
- Чувајте го уредот чист и без прашина и остатоци.
- Осигурајте се дека сите жичени врски остануваат безбедни и без корозија.
- Избегнувајте изложување на уредот на екстремни температури или директна сончева светлина.
Решавање проблеми
If you experience issues with your KISLOC2, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Ampлафијачот не се вклучува. | No signal from factory radio; faulty remote wire connection; factory radio not compatible with DC offset turn-on. | Ensure factory radio is on and playing audio. Check blue remote wire connection. Verify factory radio's amplifier output impedance is 60Ω or lower. If not, a separate switched 12V source for the amplifier's remote input may be required. |
| No audio output from ampживописен. | Incorrect speaker wire input connections; faulty RCA cables; amplifier settings incorrect. | Double-check all input speaker wire connections (polarity). Test RCA cables. Verify amplifier input settings (e.g., input sensitivity, gain). |
| Искривен звук. | Влезниот сигнал е превисок; ampзасилувањето на лифирачот е поставено превисоко. | Reduce the volume level of the factory radio. Adjust the gain settings on your aftermarket ampживописен. |
| Unit gets hot or smokes. | Преоптоварување или краток спој. | Immediately disconnect power. This indicates a serious issue. Do not re-connect power. Contact Kicker support or a qualified technician. |
Спецификации
| Карактеристика | Спецификација |
|---|---|
| Модел | 46KISLOC2 |
| Влезни канали | 2 (стерео) |
| Максимален влезен сигнал | 55 Watts (16 Volts) |
| Излез Voltage | До 8 волти |
| Фреквентен одговор | 20Hz - 20kHz (Flat) |
| Излез за далечинско вклучување | 100mA, 12V (DC Offset Activated) |
| Димензии (Д x Ш) | 6"L x 5"W (approximate, unit body is compact) |
| Тежина | 2.82 унци |
Информации за гаранцијата
Kicker products are warranted against defects in material and workmanship for a period of one (1) year from the date of original purchase. Please retain your sales receipt as proof of purchase. This warranty is valid only for the original purchaser and is not transferable.
The warranty does not cover damage due to improper installation, accident, misuse, abuse, negligence, normal wear and tear, or unauthorized modification. For full warranty terms and conditions, please refer to the official Kicker website or contact Kicker customer support.
Поддршка за корисници
For technical assistance, troubleshooting, or warranty inquiries, please contact Kicker customer support:
- Webсајт: www.kicker.com
- Телефон: Погледнете го Наводникот webсајт за регионални контакт броеви.
- Е-пошта: Погледнете го Наводникот webстраница за е-адреси за поддршка.
When contacting support, please have your product model number (46KISLOC2) and proof of purchase ready.
