1. Вовед
The Behringer EURORACK PRO RX1602 V2 is a professional, multi-purpose 16-input ultra-low noise line mixer designed for various audio applications. It functions as a flexible sub-mixer, multi-track monitoring mixer, and level translator, offering high-headroom and ultra-transparent audio performance. This manual provides essential information for the proper setup, operation, and maintenance of your RX1602 V2.
Главните карактеристики вклучуваат:
- 16 balanced high-headroom line inputs, configurable for individual stereo or mono use.
- Ultra-low noise (ULN) design for highest possible headroom and transparent audio.
- Dedicated balance and level controls per channel.
- Selectable +4/-10 level operation per channel.
2. Отпакување и првична проверка
Carefully unpack the RX1602 V2 and inspect it for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately. Ensure all components listed in the packaging are present.
Пакетот треба да содржи:
- Behringer EURORACK PRO RX1602 V2 Line Mixer
- Кабел за напојување
- Овој кориснички прирачник
3. Поставување
3.1 Поврзување за напојување
Connect the supplied power cable to the RX1602 V2's power input and then to a suitable AC power outlet. Ensure the power switch is in the OFF position before connecting.
3.2 Аудио врски
The RX1602 V2 features 16 balanced 1/4-inch TRS line inputs, organized into 8 stereo channels. Each channel can be used for individual stereo or mono signals.
- Connect your audio sources (e.g., synthesizers, drum machines, audio interfaces) to the 1/4-inch TRS input jacks on the rear panel.
- For stereo sources, use both inputs of a channel (e.g., 1/L and 2/R for channel 1).
- For mono sources, connect to the left input of a channel (e.g., 1/L for channel 1).
- Connect the main outputs of the RX1602 V2 to your ampосигурувач, звучници со напојување или интерфејс за снимање.
Слика 1: Front panel of the Behringer EURORACK PRO RX1602 V2 line mixer, showing all controls and input/output indicators.
4. Упатства за работа
4.1 Вклучување/исклучување
After all connections are made, press the POWER switch located on the front panel to turn the unit ON. The power indicator LED will illuminate. Always power on your mixer before connecting to an amplifier or powered speakers, and power off after use.
4.2 Контроли на канали
Each of the 8 stereo channels features the following controls:
- Прекинувач MODE: Selects between stereo (depressed) or mono (released) operation for the channel. In mono mode, the signal from the left input is routed to both left and right outputs.
- Контрола на BALANCE: Adjusts the balance between the left and right signals for stereo channels, or acts as a pan control for mono channels.
- Контрола на LEVEL: Sets the output level for the individual channel.
- MUTE Switch: Silences the output of the individual channel.
- CLIP LED: Illuminates when the input signal is too high, indicating potential clipping. Reduce the input level to avoid distortion.
- +4/-10 Level Selection: A switch (often on the rear or recessed on the front) allows selection between +4 dBu (professional line level) and -10 dBV (consumer line level) for optimal signal matching.
4.3 Main Output Controls
- MAIN LEVEL Control: Adjusts the overall output level of the mixer.
- LEFT/RIGHT OUTPUT LEVEL METERS: Provide visual indication of the main output signal levels. Aim for levels that are strong but do not consistently peak into the red.
4.4 Излез за слушалки
Connect headphones to the PHONES jack for monitoring the main mix. The PHONES LEVEL control adjusts the headphone volume.
5. Одржување
The Behringer RX1602 V2 requires minimal maintenance.
- Чистење: Користете мека, сува крпа за чистење на надворешноста на уредот. Избегнувајте абразивни средства за чистење или растворувачи.
- Вентилација: Обезбедете соодветна вентилација околу уредот за да спречите прегревање. Не ги блокирајте отворите за вентилација.
- Складирање: When not in use for extended periods, store the mixer in a dry, dust-free environment.
6 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Нема излез на звук | Power off; incorrect connections; MUTE engaged; low level controls | Check power, cables, MUTE switches, and all LEVEL controls. |
| Искривен звук | Input signal too high; CLIP LED illuminated | Reduce input level from source or adjust channel LEVEL control. Check +4/-10 switch. |
| Брмчење или бучава | Ground loop; unshielded cables; interference | Use balanced cables. Ensure proper grounding. Try isolating power sources. |
| Еден канал не работи | Faulty cable; MUTE engaged; incorrect MODE setting | Test with a different cable. Check MUTE switch and MODE setting for the channel. |
| Уредот не се вклучува | Power cable not connected; faulty power outlet | Ensure power cable is securely connected. Test power outlet with another device. |
| Incorrect stereo imaging | Incorrect BALANCE setting; mono source connected to stereo input | Adjust BALANCE control. Ensure MODE switch is correctly set for stereo or mono sources. |
7. Спецификации
| Карактеристика | Детал |
|---|---|
| Модел | RX1602 V2 |
| Број на канали | 16 (8 stereo) |
| Технологија за поврзување | ТРС |
| Извор на енергија | Електричен со кабел |
| Тежина на ставката | 4.87 фунти (2.21 кг) |
| Димензии на производот | 5.87 x 19.02 x 1.73 инчи (14.9 x 48.3 x 4.4 см) |
| Прво достапно | 26 јули 2019 година |
Слика 2: Size comparison of the Behringer EURORACK PRO RX1602 V2, illustrating its compact 1U rack-mountable design.
8. Гаранција и поддршка
За детални информации за гаранцијата и техничка поддршка, ве молиме погледнете го официјалниот Behringer webлокација или контактирајте го вашиот локален дистрибутер на Behringer. Чувајте ја сметката како доказ за купување за какви било гаранциски побарувања.
You can find further assistance and product registration information at: www.behringer.com
