Steinel 58678

Steinel LED-spot Way N with Twilight Sensor Instruction Manual

Модел: 58678

Вовед

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Steinel LED-spot Way N with Twilight Sensor. Please read these instructions carefully before use and retain them for future reference.

The Steinel LED-spot Way N is an IP44-rated outdoor path light designed to provide reliable illumination for driveways, access paths, and garden areas. It features an integrated twilight sensor for automatic operation and an adjustable spotlight head for precise light direction.

Инструкции за безбедност

  • Електрична безбедност: Installation must be performed by a qualified electrician in accordance with national wiring regulations. Ensure the power supply is disconnected before installation or maintenance.
  • Voltage: This product operates on 220 - 240 V / 50 - 60 Hz AC mains power.
  • Класа на заштита: The device has an IP44 protection rating, making it suitable for outdoor use and protected against splashing water.
  • Lamp Тип: Користете само GU10 LED lampкако што е наведено. Не ја надминувајте максималната дозволена вредностtage of 9W for replacement GU10 LED lamps.
  • Монтирање: Ensure the mounting surface is stable and capable of supporting the weight of the fixture.
  • Деца: Држете ги материјалите за пакување и малите делови подалеку од дофат на деца.

Поставување и инсталација

1. Отпакување

Carefully remove all components from the packaging. Verify that all parts listed in the 'Included Components' section are present and undamaged.

Steinel LED-spot Way N and its components in packaging

Image: The Steinel LED-spot Way N, its GU10 LED lamp, 2.5m power cable with plug, mounting hardware (screws, plugs), and quick start guide, as received in its packaging.

2. Mounting the Spotlight

The LED-spot Way N is designed for easy floor mounting. Choose a suitable location on a stable surface, such as a patio, pathway, or garden area.

  1. Position the base of the spotlight at the desired location.
  2. Mark the drilling points through the holes in the base.
  3. Drill holes at the marked positions. Insert the provided wall plugs if mounting into masonry or concrete.
  4. Secure the spotlight base to the surface using the supplied screws.

3. Поврзување на енергија

The spotlight comes with a pre-installed 2.5-meter power cable and plug for convenient connection to a standard outdoor power outlet.

2.5 meter power cable with plug for Steinel LED-spot Way N

Image: The included 2.5-meter power cable with a standard European plug, ready for connection to an outdoor power source.

  1. Ensure the power outlet is suitable for outdoor use and has appropriate weather protection.
  2. Plug the power cable into the outdoor outlet.
  3. Ensure the cable is routed safely to prevent tripping hazards and damage.

4. Лamp Инсталација/Замена

The spotlight includes a replaceable GU10 LED lamp. To install or replace the lamp:

  1. Проверете дали напојувањето е исклучено.
  2. Carefully twist and remove the front cover of the spotlight.
  3. Insert the GU10 LED lamp into the socket, aligning the pins, and twist to secure it.
  4. Replace the front cover, ensuring it is securely fastened to maintain the IP44 rating.

Упатства за работа

1. Automatic Twilight Sensor (NightAutomatic)

The Steinel LED-spot Way N features a NightAutomatic function, which means the light will automatically turn on when ambient light levels fall below a set threshold and turn off when it becomes bright enough. This ensures continuous illumination after sunset.

Steinel LED-spot Way N path lights illuminating a pathway at dusk

Image: Multiple Steinel LED-spot Way N lights providing consistent illumination along an outdoor pathway during twilight hours.

2. Adjusting the Twilight Sensor

The twilight sensor sensitivity can be adjusted directly on the spotlight to suit your specific needs (2-1000 lux).

  1. Locate the adjustment dial or switch for the twilight sensor on the fixture.
  2. Turn the dial to increase or decrease the lux threshold. A lower lux setting means the light will turn on earlier in dimmer conditions, while a higher setting means it will turn on later when it's darker.
  3. Test the setting by observing the light's behavior at dusk and dawn.

3. Adjusting the Spotlight Head

The spotlight head offers flexibility in directing the light beam.

Steinel LED-spot Way N spotlight head with arrows indicating adjustment range

Image: Close-up of the Steinel LED-spot Way N's adjustable head, showing its capability to rotate horizontally and vertically for precise light positioning.

  • The spotlight head can be rotated 180° хоризонтално.
  • It can also be tilted 90° вертикално.
  • Gently adjust the head to illuminate your desired area, such as a path, plant, or architectural feature.

Одржување

1. Чистење

To maintain the appearance and performance of your spotlight:

  • Ensure the power supply is disconnected before cleaning.
  • Избришете го апаратот со мека,amp крпа.
  • Do not use abrasive cleaners, solvents, or high-pressure washers, as these can damage the finish or internal components.
  • Regularly clean the twilight sensor lens to ensure accurate light detection.
Rain cloud icon indicating weather resistance

Image: An icon depicting a rain cloud, symbolizing the IP44 weather resistance of the product, which protects it from splashing water.

2. Лamp Замена

Refer to the 'Lamp Installation/Replacement' section under Setup for detailed instructions on how to replace the GU10 LED lamp.

Решавање проблеми

ПроблемМожна причинаРешение
Светлото не се вклучува.Нема напојување.Check the power outlet and circuit breaker. Ensure the plug is fully inserted.
Faulty GU10 LED lamp.Replace the GU10 LED lamp.
Twilight sensor setting is too high (light thinks it's still bright).Adjust the twilight sensor sensitivity to a lower lux value.
Светлината останува вклучена во текот на денот.Twilight sensor setting is too low (light thinks it's still dark).Adjust the twilight sensor sensitivity to a higher lux value.
Sensor lens is dirty or obstructed.Clean the sensor lens and remove any obstructions.

Технички спецификации

КарактеристикаСпецификација
Број на модел58678
Димензии (Д x Ш x В)226 x 140 x 572 mm
Тежина1.23 кг
Мрежна врска220 - 240 V / 50 - 60 Hz
Потрошувачка на енергија7.86 W
Светлосен флукс512 lumens (fixture), 620 lumens (included GU10 lamp)
Температура на боја3000 K (топло бело)
Класа за заштитаIP44
МатеријалАлуминиум
ЗавршиPowder-coated (Anthracite)
Twilight Sensor Range2 - 1000 лукса
Прилагодување на главата на рефлектор180 ° хоризонтално, 90 ° вертикално
Вклучено Лamp ТипGU10 LED (replaceable, max 9W)
Класа за енергетска ефикасностF

Информации за гаранцијата

Steinel products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Steinel webстраница. Зачувајте го доказот за купување за какви било гаранциски побарувања.

Поддршка за корисници

If you encounter any issues or have questions regarding your Steinel LED-spot Way N that are not covered in this manual, please contact Steinel customer support. You can find contact details on the official Steinel webна лице место или преку вашиот продавач.

Онлајн ресурси: For additional information, product registration, or FAQs, please visit the Steinel official webсајт.

Поврзани документи - 58678

Предview STEINEL NightmatIQ & NightmatIQ Plus Dämmerungsschalter Bedienungsanleitung | Инсталација и функција
Umfassende Anleitung für STEINEL NightmatIQ и NightmatIQ Plus Dämmerungsschalter. Ерфахрен Сие мехр über Инсталација, функционалност, мануела и апликација-гестикулација на Ајнстеллунген за Ihre Außenbeleuchtung.
Предview STEINEL L 605 S / L 605 LED Sensorleuchte - Bedienungsanleitung
Umfassende Bedienungsanleitung für die STEINEL L 605 S und L 605 LED Sensorleuchten. Erfahren Sie mehr über Installation, Funktionen, Sicherheitshinweise und Fehlerbehebung für diese Innen- und Außenleuchten mit Bewegungsmelder.
Предview Steinel NightmatIQ & NightmatIQ Plus Quick Start Guide | Twilight Sensors
Quick start guide for Steinel NightmatIQ and NightmatIQ Plus twilight sensors. Learn about installation, technical specifications, and features for intelligent lighting control.
Предview Упатство за употреба и упатство за инсталација на Steinel XLED CAM 1 SC
Сеопфатен водич за LED рефлектор со сензорски прекинувач Steinel XLED CAM 1 SC, кој опфаќа инсталација, конфигурација, употреба и решавање проблеми. Дознајте за неговите карактеристики, технички спецификации и како да го користите преку апликацијата Steinel CAM.
Предview Инсталација на апликацијата Steinel CAM
Eine detaillierte Installationsanleitung für die Steinel CAM-App, die Schritt für Schritt erklärt, wie Sie Ihre Steinel CAM-Sicherheitskamera einrichten, mit Ihrem WLAN verbinden und bedienen. Enthält Anleitungen zur Понtage, App-Einrichtung und Fehlerbehebung.
Предview STEINEL LS 150 S / LS 150 LED-Strahler mit Bewegungsmelder - Bedienungsanleitung
Umfassende Bedienungsanleitung für den STEINEL LS 150 S und LS 150 LED-Strahler mit Bewegungsmelder. Enthält Installationsanweisungen, Sicherheitshinweise, Funktionserklärung und Fehlerbehebung.