1. Вовед
The AstralPool NA6888 is a sophisticated regulator, controller, and display unit designed for integration with AstralPool heat pump systems. This device provides essential control and monitoring functionalities for your heat pump, ensuring efficient and reliable operation. Please note that this unit is not compatible with remote control systems.
This manual provides detailed instructions for the proper installation, operation, and maintenance of your NA6888 unit. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
2. Информации за безбедност
Секогаш почитувајте ги следниве безбедносни упатства за да спречите повреда или оштетување на уредот:
- Електрична безбедност: This unit operates on 220V AC. All electrical connections must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation or maintenance work.
- Заштита на животната средина: The NA6888 unit has an IP65 protection rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, avoid direct high-pressure water jets or submersion.
- Правилна употреба: Use the device only for its intended purpose as a regulator, controller, and display for AstralPool heat pumps. Do not attempt to modify the unit.
- Ракување: Handle the unit with care to avoid physical damage.
3. Карактеристики на производот
The NA6888 unit offers a range of features for comprehensive heat pump management:
- Интегрирана контрола: Combines regulation, control, and display functions in a single compact unit.
- Влезови на сензор: Supports dedicated inputs for a Temperature Sensor (T1) and a Defrost Sensor (T2).
- Влезови за аларм: Features three external alarm signal inputs (S1, S2, S3) for enhanced system monitoring.
- Контрола на излезот: Provides control outputs for key heat pump components including Water Pump, Fan, Valve, and Compressor.
- Издржлив дизајн: IP65 rated enclosure for protection against dust and water splashes.
Слика 3.1: Предна страна view of the NA6888 controller display, showing the digital readout and control buttons.
4. Содржина на пакетот
По отворањето на пакувањето, проверете дали се присутни сите следни компоненти:
- 1x NA6888 Regulator-Controller-Display Unit
- 1x Wiring Harness/Cables
- 2x клипови за монтирање
Figure 4.1: Included wiring harness.
Figure 4.2: Mounting clips.
5. Поставување и инсталација
Installation of the NA6888 unit requires careful attention to electrical connections. It is strongly recommended that installation be performed by a qualified and licensed professional.
5.1. Монтирање на единицата
- Identify a suitable location for the controller, ensuring it is protected from direct sunlight, extreme temperatures, and excessive vibration.
- Cut an appropriate opening in the mounting panel or enclosure, matching the dimensions of the NA6888 unit.
- Insert the NA6888 unit into the opening from the front.
- Secure the unit in place using the provided mounting clips on the sides, ensuring a snug fit.
5.2. Приклучоци за жици
Refer to the wiring diagram printed on the back of the NA6888 unit for precise connection points. Ensure all connections are secure and correctly polarized.
Figure 5.1: NA6888 Wiring Diagram.
Описи на терминалите:
| Терминал | Опис | Белешки |
|---|---|---|
| T1 | Сензор за температура | Connect the main temperature sensor (NTC=5kΩ/25°C). |
| T2 | Сензор за одмрзнување | Connect the defrost sensor. |
| S1, S2, S3 | External Alarm Signals | Inputs for external alarm triggers. |
| 1, 2 | Влез на енергија | Connect to 220V AC power supply. |
| 6, 7 | Water Pump Output | Control output for the water pump. |
| 8, 9 | Излез на вентилаторот | Control output for the fan. |
| 10, 11 | Излез на вентил | Control output for the valve. |
| 11, 12 | Излез на компресорот | Control output for the compressor. Note shared terminal 11 with Valve. |
After all connections are made, double-check the wiring against the diagram to prevent damage to the unit or connected components.
6. Упатства за работа
Once installed and powered on, the NA6888 display will illuminate, showing current system parameters. The unit features several buttons for navigation and setting adjustments:
- горе (^) Копче: Used to increase values or navigate up through menu options.
- долу (v) Копче: Used to decrease values or navigate down through menu options.
- Копче SET: Used to enter a menu, confirm a selection, or save a setting.
- M (Menu) Button: Used to access the main menu or exit a sub-menu.
6.1. Основно работење
- Вклучување: Ensure the unit is correctly wired and power is supplied. The display will show the current temperature or system status.
- ViewПараметри за вклучување: Use the Up/Down buttons to cycle through various displayed parameters (e.g., temperature readings from T1/T2, set points, operational status).
- Прилагодување на поставките:
- Притиснете го ПОСТАВЕТЕ button to enter the setting mode for the currently displayed parameter, or press the M копче за пристап до главното мени.
- Use the Up/Down buttons to adjust the value.
- Притиснете ПОСТАВЕТЕ again to confirm and save the new value.
- Притиснете M to exit the menu or setting mode.
For detailed programming and advanced settings, refer to the specific programming guide for your AstralPool heat pump model, as the NA6888 acts as the interface for these settings.
7. Одржување
The NA6888 unit is designed for low maintenance. Regular checks can help ensure its longevity and proper function:
- Чистење: Периодично бришете го екранот иasing со мек, damp крпа. Не користете абразивни средства за чистење или растворувачи. Уверете се дека течноста не влегува во уредот.
- Проверка на врската: Annually, or if issues arise, have a qualified technician check all electrical connections for tightness and signs of corrosion.
- Еколошки услови: Ensure the unit remains within its specified operating environment (temperature, humidity) and that its IP65 rating is not compromised by physical damage.
8 Смена на проблеми
If you encounter issues with your NA6888 unit, consider the following common troubleshooting steps. For complex problems, always consult a qualified technician.
| Проблем | Можна причина | Решение |
|---|---|---|
| Екранот е празен | No power supply; Loose connection; Unit failure. | Check power source (220V AC). Verify wiring connections. If power is present and connections are secure, the unit may require replacement. |
| Неправилно отчитување на температурата | Faulty sensor (T1 or T2); Loose sensor connection. | Check sensor wiring. Test sensor resistance (NTC=5kΩ/25°C). Replace sensor if faulty. |
| Outputs (Pump, Fan, etc.) not activating | Incorrect settings; Wiring issue; Component failure. | Verify controller settings. Check wiring to the respective component. Test the component itself. |
| External alarm not registering | Incorrect wiring to S1/S2/S3; Faulty external alarm device. | Check wiring to alarm inputs. Test the external alarm device. |
If troubleshooting steps do not resolve the issue, contact AstralPool customer support or a certified service technician. Information regarding spare parts availability is not provided.
9. Спецификации
| Параметар | Вредност |
|---|---|
| Број на модел | NA6888 |
| Бренд | АстралПул |
| Напојување | 220V AC, 2A max |
| Влез во сензорот за температура | T1 (NTC=5kΩ/25°C) |
| Defrost Sensor Input | T2 |
| Надворешни влезови за аларм | S1, S2, S3 |
| Контролни излези | Water Pump, Fan, Valve, Compressor |
| Оценка за заштита | IP65 |
| Категорија на инсталација | CAT II |
| ASIN | B07XGCN44T |
| Прво достапен датум | 21 јуни 2021 година |
10. Гаранција и поддршка
Specific warranty terms for the NA6888 unit are typically provided at the point of purchase or can be obtained directly from AstralPool. Please retain your proof of purchase for warranty claims.
For technical support, service, or inquiries regarding spare parts, please contact AstralPool customer service or your authorized dealer. Contact information can usually be found on the AstralPool official webстраницата или во вашата документација за купување.
