БЛС Т401

BLS T401 LED Motion Sensor Closet Light User Manual

Модел: T401

1. Информации за безбедност

Please read all instructions carefully before using the BLS T401 LED Motion Sensor Closet Light. Retain this manual for future reference.

  • Не го изложувајте уредот на екстремни температури или директна сончева светлина.
  • Чувајте го уредот подалеку од вода и висока влажност.
  • Не обидувајте се да го расклопите или модифицирате уредот. Ова може да ја поништи гаранцијата и да претставува ризик за безбедноста.
  • За полнење користете го само испорачаниот кабел за полнење или сертифициран USB-C кабел.
  • Ensure the installation surface is clean and dry before attaching the light using adhesive methods.

2. Производот завршиview

The BLS T401 LED Motion Sensor Closet Light is a versatile, rechargeable lighting solution designed for various indoor applications. It features a motion sensor for automatic illumination and a long-lasting battery.

BLS T401 LED Motion Sensor Closet Light

Figure 2.1: The BLS T401 LED Motion Sensor Closet Light, a sleek silver bar with a central motion sensor and light strip.

Клучни карактеристики:

  • Супер светло осветлување: 200 lumens with 6000K Clean White Glow.
  • Безжична инсталација: No hard wiring required.
  • Сензор за движење: Automatically turns on when motion is detected in dark or low-light conditions.
  • Батерија на полнење: Built-in 4500mAh UL certified battery for extended use.
  • Повеќе опции за монтирање: Magnetic attachment, 3M adhesive tape, or screws.
  • 3-Mode Switch: OFF, ON, and AUTO modes for flexible operation.
BLS T401 LED Motion Sensor Closet Light dimensions and motion detection range

Figure 2.2: Diagram illustrating the dimensions of the BLS T401 light (15.1 inches long, 0.9 inches wide, 0.98 inches high) and its 120-degree motion detection range up to 10 feet.

3. Поставување

The BLS T401 offers flexible installation options to suit various surfaces.

Методи на инсталација:

  1. Магнетен додаток: The light has built-in strong magnets. It can be directly attached to any iron surface without additional mounting hardware.
  2. Леплива лента: For non-magnetic surfaces, use the included 3M adhesive tape. Clean the desired surface thoroughly, peel off the protective film from the adhesive pads, attach them to the metal mounting brackets, and then firmly press the brackets onto the surface. Once the brackets are secure, the light can be magnetically attached to them.
  3. Монтирање на завртка: For a more permanent installation, use the included screws. Mark the positions for the screws through the holes on the metal mounting brackets. Drill pilot holes if necessary, then secure the brackets with screws. Finally, attach the light magnetically to the installed brackets.
Four-step diagram showing installation of BLS T401 LED light using adhesive tape and magnetic attachment

Figure 3.1: Step-by-step guide for installing the light using adhesive tape and magnetic brackets, including an example of magnetic attachment to a refrigerator and under-cabinet placement.

4. Упатства за работа

The BLS T401 features a sliding switch with three modes: OFF, ON, and AUTO.

Избор на режим:

  • ИСКЛУЧЕНО: The light remains off regardless of motion or ambient light.
  • НА: The light stays continuously on.
  • АВТОМАТ: In this mode, the motion sensor activates the light. The light will turn on when it senses motion in both dark and low-light environments. It stays on as long as motion is detected nearby and automatically turns off 18 seconds after motion ceases. A built-in light sensor ensures the light stays off when the ambient environment is bright to conserve battery.

Прилагодување на сензор за движење:

The sensitivity of the motion sensor can be adjusted by rotating the light on its magnetic base. Adjust the angle to achieve optimal lighting and motion detection for your specific environment.

Video 4.1: An official BLS LED video demonstrating the light's features, including its battery and motion sensor functionality.

5. Полнење

The BLS T401 is equipped with a 4500mAh rechargeable lithium-ion battery.

Процес на полнење:

  1. Locate the USB-C charging port on one end of the light.
  2. Connect the provided USB-C charging cable to the light and to a compatible USB power source (e.g., wall adapter, computer USB port).
  3. The charging indicator light will illuminate to show the charging status. Refer to the indicator light guide for specific details (usually red for charging, green for fully charged).
  4. A full charge can last up to 180 days in AUTO mode, based on 10 activations per day, 20 seconds each time.
Comparison of BLS T401 battery life with other LED lights

Figure 5.1: Visual comparison highlighting the BLS T401's 180-day run time with its large 4500mAh rechargeable battery versus other lights with smaller batteries requiring frequent charging.

6. Одржување

To ensure optimal performance and longevity of your BLS T401 LED Motion Sensor Closet Light, follow these maintenance guidelines:

  • Чистење: Wipe the light's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.
  • Нега на батеријата: For best battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably diminishes.
  • Складирање: If storing the light for an extended period, charge it fully and store it in a cool, dry place. Recharge every 3-6 months to maintain battery health.

7 Смена на проблеми

If you encounter any issues with your BLS T401, refer to the following common problems and solutions:

ПроблемМожна причинаРешение
Light does not turn on in AUTO mode.Insufficient ambient light (too bright), no motion detected, or low battery.Ensure the environment is dark enough for AUTO mode. Check for motion within the sensor's range. Recharge the battery.
Светлото се гаси пребрзо или останува вклучено предолго.Motion sensor sensitivity or placement.Adjust the angle of the light on its magnetic base to optimize sensor detection. Ensure no constant motion is within range if it stays on too long.
Светлината е слаба или трепка.Слаба батерија.Наполнете ја батеријата целосно.
Светлината не се полни.Неисправен кабел за полнење или извор на енергија.Try a different USB-C cable and/or a different USB power source.

8. Спецификации

КарактеристикаДетал
БрендBLS
Број на моделТ401
Тип на извор на светлинаLED
Осветленост200 лумени
Температура на боја6000 Kelvin (Clean White)
Капацитет на батеријата4500mAh Lithium Ion (UL Certified)
Извор на енергијаНапојува со батерија
Димензии на производот15.1"Д x 0.9"Ш x 0.98"В
Тежина на ставката8 унци
МатеријалАкрилонитрил бутадиен стирен, алуминиум
Контролен методSlide Switch (OFF/ON/AUTO)
Опсег на сензор за движењеUp to 10 feet, 120° detection angle
Тип на инсталацијаMagnetic, Adhesive, Screw Mount
Внатрешна/надворешна употребаЗатворен

9. Гаранција и поддршка

BLS нуди а One Year Warranty & Lifelong Service for this product. Should you encounter any issues or have questions regarding your BLS T401 LED Motion Sensor Closet Light, please contact customer service via email at cuscare.blscollection@gmail.com. Please provide your order ID for efficient support. The manufacturer is committed to providing worry-free service.

Поврзани документи - Т401

Предview BLS HV25 Visor with Integrated Helmet - Technical Specification
Detailed technical specifications for the BLS HV25 visor, a high-protection helmet compatible with BLS 2700next and 2800next PAPRs, designed for industrial safety.
Предview BLS 400/3 Celoobličejová maska: Technické údaje a vlastnosti
Podrobný přehled celoobličejové masky BLS 400/3, včetně jejích materiálů, technických specifikací, certifikací a vlastností pro bezpečnostní složky. Univerzální připojení RD-40 a vysoký ochranný faktor.
Предview Прирачник за пила за трупци Forest Master BLS-3H за масовно складирање на трупци
Сеопфатен водич за пилата за сечење трупци Forest Master BLS-3H, кој опфаќа информации за склопување, употреба, безбедност и гаранција. Научете како безбедно и ефикасно да сечете повеќе трупци.
Предview Упатство за користење на USB-приемник за Bluetooth предавател и приемник од Шенжен Бо Лиан Шенг BLS-B55
Сеопфатно упатство за корисникот за Shenzhen Bo Lian Sheng BLS-B55, разновиден 3-во-1 Bluetooth предавател, приемник и USB аудио адаптер. Дознајте повеќе за поставувањето, режимите, спецификациите и усогласеноста со FCC.
Предview Упатство за користење на SpeedyBee F7 35A BLS Mini Stack V1.0
User manual for the SpeedyBee F7 35A BLS Mini Stack, detailing its specifications, dimensions, package contents, connection procedures, flight controller and ESC layout, peripheral connections, app usage for configuration and firmware updates, and technical parameters.
Предview Stageworx BLS-315 Pro Lighting Stand B Kit Упатство за користење
Упатство за корисникот за Stageworx BLS-315 Pro Lighting Stand Kit B, со детални упатства за безбедност, карактеристики, работа, поставување, расклопување, технички спецификации и отстранување на животната средина.