1. Вовед
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Richmat Electric Bed Motor. This dual-motor system is designed to provide reliable and powerful adjustment for electric beds, featuring a maximum thrust of 6500N per motor. It includes both wired and wireless remote controls for flexible use.
Figure 1: Richmat Electric Bed Motor with included wireless and wired remote controls.
2. Поставување и инсталација
Before installation, ensure all components are present and undamaged. The motor is designed for easy integration into compatible electric bed frames.
2.1. Димензии и компатибилност
The motor features a robust design with a maximum thrust of 6500N per motor. The center distance between the two mounting rods on the motor is 581 mm. The overall dimensions are 707 mm (length) x 167 mm (width) x 121 mm (height).
Figure 2: Detailed dimensions of the Richmat Electric Bed Motor (measurements in mm).
2.2. Чекори за инсталација
- Подготовка: Ensure the bed frame is stable and accessible. Disconnect power from any existing motor system.
- Монтирање: Align the motor's mounting points with the corresponding points on your bed frame. Secure the motor using appropriate fasteners (not included, typically provided with the bed frame). The mounting hole diameter is 25mm.
- Електрична врска: Connect the motor's power cable to a suitable power outlet. Ensure the connection is secure.
- Поврзување со далечински управувач: Plug in the wired remote control if you intend to use it. The wireless remote control operates via 2.4G frequency and does not require a direct cable connection to the motor.
- Првичен тест: Once installed, carefully test the motor's functions using the remote controls to ensure smooth operation of the head and foot sections.
3. Упатства за работа
The Richmat Electric Bed Motor offers dual control options: a 2.4G wireless handheld controller and a wired handheld controller. You can choose the controller that best suits your preference and environment.
3.1. Безжичен далечински управувач
The wireless remote provides convenient control without physical tethering. It features buttons for adjusting the head and foot sections of the bed.
Figure 3: Wireless Remote Control (Front and Side Viewс).
- Главата горе/долу: Use the designated buttons to raise or lower the head section of the bed.
- Нога нагоре/надолу: Use the designated buttons to raise or lower the foot section of the bed.
- Simultaneous Movement: Some buttons may allow for synchronized movement of both head and foot sections.
3.2. Жичен далечински управувач
The wired remote control offers a reliable connection and similar functionality to the wireless version.
Слика 4: Жичен далечински управувач.
- Главата горе/долу: Press and hold the corresponding buttons to adjust the head section.
- Нога нагоре/надолу: Press and hold the corresponding buttons to adjust the foot section.
4. Одржување
Proper maintenance ensures the longevity and optimal performance of your electric bed motor.
- Чистење: Regularly clean the motor and remote controls with a dry, soft cloth. Avoid using abrasive cleaners or solvents.
- Заштита од влага: Protect the unit from moisture and liquids. Do not expose it to water or high humidity.
- Инспекција на кабел: Periodically inspect all cables for signs of wear, fraying, or damage. Replace damaged cables immediately.
- Подмачкување: The motor is generally maintenance-free regarding internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by a qualified technician.
5 Смена на проблеми
If you encounter issues with your Richmat Electric Bed Motor, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Моторот не реагира на далечинскиот управувач. | No power; Remote control battery low (wireless); Remote control not paired (wireless); Loose cable connection (wired). | Check power outlet and motor connection. Replace remote batteries. Re-pair wireless remote (refer to specific pairing instructions if available). Ensure wired remote cable is securely plugged in. |
| Моторот испушта необични звуци. | Obstruction; Loose mounting; Internal issue. | Check for any obstructions around the motor or moving parts. Ensure the motor is securely mounted. If noise persists, contact support. |
| Bed movement is jerky or inconsistent. | Overload; Obstruction; Power fluctuation. | Ensure the bed is not overloaded beyond its weight capacity. Check for obstructions. Ensure stable power supply. |
Доколку проблемот продолжи откако ќе се обидете со овие решенија, контактирајте ја службата за корисничка поддршка за понатамошна помош.
6. Спецификации
| Карактеристика | Детал |
|---|---|
| Број на модел | HJA1 |
| Производител | Ричмат |
| Димензии (Д x Ш x В) | 70.7 x 16.7 x 12.1 cm |
| Тежина | 5.12 килограми |
| Максимален потисок | 2 x 6500N |
| Дијаметар на дупка за монтирање | 25 мм |
| Center Distance Between Mounting Rods | 581 мм |
| Тип на контрола | 2.4G Wireless Handheld Controller + Wired Handheld Controller |
| Потребно е собрание | Да |
| UPC | 753510673065 |
7. Гаранција и поддршка
This Richmat Electric Bed Motor is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or manufacturer directly. When contacting support, please have your model number (HJA1) and purchase information readily available.
