KeylessOption EZSDEI7141 474V

KeylessOption Keyless Entry Remote Starter Car Key Fob User Manual

Model: EZSDEI7141 474V

Вовед

This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.

Предна страна view of the KeylessOption Key Fob with lock, unlock, AUX, and star buttons.

Слика: напред view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.

Поставување и програмирање

Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.

Програмски чекори:

  1. Open the driver's side door of your vehicle.
  2. Вметнете го клучот во бравата за палење и свртете го на ON position. Do not start the engine.
  3. Locate the Viper system's control button (often a small button with a blue LED indicator).
  4. Притиснете го контролното копче седум пати. На eighth press, hold the button down until the car chirps.
  5. While still holding the control button, press the Заклучување button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
  6. Пуштете го контролното копче.
  7. Свртете го клучот за палење на ИСКЛУЧЕНО поставете го и извадете го.
  8. Close the driver's side door.
  9. Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.

If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.

Видео: Краток прегледview of KeylessOption Key Fob Remotes for Viper systems.

Упатства за работа

Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:

Аголна view of the KeylessOption Key Fob, showing the side profile и распоред на копчиња.

Слика: Под агол view of the KeylessOption Key Fob, highlighting its ergonomic design.

Одржување

Замена на батерија:

If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:

  1. Внимателно одделете ги двете половини од далечинскиот управувач.asing користејќи мал шрафцигер со рамна глава или алатка за дупчење.
  2. Remove the old battery. Note its orientation (+/- sides).
  3. Вметнете ја новата батерија со точна ориентација.
  4. Скршете го далечинскиот управувач casinповторно споени безбедно.
Назад view of the KeylessOption Key Fob, showing the smooth casing.

Слика: Назад view of the KeylessOption Key Fob, indicating where the casing can be opened for battery access.

Решавање проблеми

Спецификации

БрендKeylessOption
Број на моделEZSDEI7141 474V
Компатибилни уредиViper Aftermarket Alarm System
FCC IDEZSDEI7141
Број на копчиња4 (Lock, Unlock, Aux, Panic)
Тежина на ставката0.634 унци
Димензии на пакетот6.77 x 4.65 x 0.47 инчи

Гаранција и поддршка

Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption webсајт.

KeylessOption Warranty Card

Image: KeylessOption Warranty Card, included with each purchase.