Вовед
This manual provides instructions for the safe and efficient operation of your ProMaster Dually Charger for Sony NP-FW50 batteries. Please read this manual thoroughly before use and retain it for future reference.
Информации за безбедност
- Не отворајте го и не расклопувајте го полначот.
- Do not use near liquids or flammable gases.
- Да се чува подалеку од дофат на деца.
- Користете само со компатибилни батерии Sony NP-FW50.
- Избегнувајте екстремни температури и директна сончева светлина.
- Исклучете го од струја кога не го користите.
Содржина на пакетот
- ProMaster Dually Charger (Model 4511)
- Built-in USB-A input cable
Производот завршиview
The ProMaster Dually Charger is designed to charge two Sony NP-FW50 batteries simultaneously. It features a compact design with a built-in USB-A cable for convenient power input.

Слика 1: Предна страна view of the ProMaster Dually Charger. This image displays the charger's dual battery slots and the LCD screen for charge status.
Клучни карактеристики:
- Двојни слотови за полнење: Charge two Sony NP-FW50 batteries concurrently.
- USB полнење: Flexible power input via USB-A.
- Интелигентна технологија за полнење: Optimizes charging for battery longevity.
- Компактен и пренослив дизајн: Easy to transport with a built-in USB cable.
- LCD дисплеј: Provides real-time battery level and charging progress.
Поставување
- Поврзете напојување: Locate the built-in USB-A cable on the back of the charger. Extend the cable and connect it to a compatible USB power source (e.g., USB wall adapter, power bank, computer USB port). The input requirement is DC 5V 2.2A (Minimum).

Слика 2: Назад view of the charger with the integrated USB-A cable. This image shows how the USB cable is stored and connected.
- Вметнете батерии: Insert one or two Sony NP-FW50 batteries into the designated charging slots (CH1 and CH2) on the charger. Ensure the batteries are inserted with the correct orientation.
Упатства за работа
- Процес на полнење: Once batteries are inserted and power is connected, the charger will automatically begin charging. The LCD display will show the charging status for each channel (CH1 and CH2).
- Следење на статусот на полнење: The LCD display indicates battery charge levels with icons and percentage indicators (25%, 50%, 75%, 100%). A blinking indicator signifies active charging, while a solid light indicates a fully charged battery.
- Време на полнење: Approximately 2 hours 30 minutes for two depleted batteries to reach 100% charge simultaneously.
- Отстранување на батериите: Once charging is complete (100% solid light on the LCD), carefully remove the batteries from the charging slots.
- Исклучување напојување: Disconnect the USB-A cable from the power source when charging is complete or when the charger is not in use.
Одржување
- Чистете го полначот со мека, сува крпа. Не користете груби хемикалии или абразивни материјали.
- Чувајте го полначот на ладно и суво место подалеку од директна сончева светлина и влага.
- Ensure the USB cable is neatly stored in its designated slot when not in use to prevent damage.
Решавање проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Полначот не се вклучува. | No power from USB source or faulty cable. | Ensure USB power source is active. Try a different USB port or adapter. Check cable connection. |
| Батериите не се полнат. | Batteries incorrectly inserted or incompatible. | Re-insert batteries correctly. Verify batteries are Sony NP-FW50 type. |
| Бавно полнење. | USB power source output is too low. | Use a USB power adapter that provides at least DC 5V 2.2A. |
Спецификации
- Модел: 4511
- Влез: DC 5V 2.2A (Min) via USB-A port
- Излез: DC 8.4V, 600mA (per channel)
- Компатибилни батерии: Sony NP-FW50
- Време на полнење: Approximately 2 hours 30 minutes (for two batteries simultaneously)
- Димензии: 3 3/16" x 2 1/4" x 1" / 80 mm x 58 mm x 25 mm
- Тежина: 2 3/8 oz / 67 g
Гаранција и поддршка
For warranty information or technical support, please refer to the ProMaster official website or contact your authorized ProMaster dealer.





