1. Вовед
This manual provides essential information for the safe and effective operation, assembly, and maintenance of your Einhell TC-TS 2025/2 U Bench-type Circular Saw. This powerful tool is designed for precise cutting of solid wood, wood fiberboard, and similar materials. Please read this manual thoroughly before initial use and keep it for future reference.
2. Информации за безбедност
Секогаш почитувајте ги следниве безбедносни мерки за да спречите повреди и оштетување на алатката:
- Прочитајте го прирачникот: Familiarize yourself with all controls, adjustments, and operating procedures before use.
- Лична заштитна опрема (ЛПЕ): Always wear safety glasses, hearing protection, and a dust mask. Gloves are recommended for handling rough materials, but avoid loose clothing or jewelry that could get caught in moving parts.
- Работна област: Ensure your work area is clean, well-lit, and free of clutter. Keep children and bystanders away.
- Поврзување за напојување: Connect the saw to a properly grounded power outlet. Do not use in damp или влажни услови.
- Безбедност на сечилото: Ensure the saw blade is sharp, clean, and correctly installed. Never operate the saw without the blade guard in place.
- Ракување со материјали: Always use a push stick or push block when feeding small workpieces or when your hands are close to the blade. Never reach over the blade.
- Стабилност: Ensure the saw is stable and securely placed on a level surface before operation.
- Исклучете го кога не се користи: Disconnect the saw from the power supply before making adjustments, changing blades, or performing maintenance.
3. Компоненти надview
Understanding the main components of your circular saw is crucial for safe and effective operation.
Слика 3.1: Севкупно view of the Einhell TC-TS 2025/2 U Bench-type Circular Saw, showing the main table, blade, and stand.
Слика 3.2: A user operating the circular saw, demonstrating typical usage for cutting wood planks.
Слика 3.3: Close-up of the adjustment wheel for controlling the saw blade's height and angle.
Слика 3.4: Detail of the saw blade guard and the flexible hose for dust extraction, showing height and angle adjustment indicators.
Слика 3.5: View of the dust extraction system, including the hose connecting to the saw blade area and the main collection port.
Слика 3.6: Close-up of the parallel stop with its integrated measurement scale for accurate longitudinal cuts.
4. Поставување
Follow these steps for initial assembly and setup of your circular saw:
- Отпакување: Внимателно отстранете ги сите компоненти од пакувањето. Проверете дали има оштетувања или делови што недостасуваат.
- Соберете ја основната рамка: Connect the frame components according to the diagrams provided in the separate assembly guide. Ensure all bolts are securely tightened.
- Mount the Saw Unit: Place the main saw unit onto the assembled base frame. Secure it using the provided fasteners.
- Install Saw Blade: If the blade is not pre-installed, carefully mount the 250mm carbide-tipped precision saw blade, ensuring the rotation direction matches the arrow on the saw. Use the appropriate tools for tightening the blade nut.
- Attach Blade Guard and Dust Extraction: Secure the transparent blade guard over the saw blade. Connect the dust extraction hose to the guard and the main dust port on the saw unit.
- Install Parallel and Angle Stops: Attach the parallel stop to the table and ensure it slides smoothly. Position the angle stop in its designated slot.
- Table Extensions: If desired, attach the left and right table extensions to expand the working surface for larger workpieces.
5. Упатства за работа
Proper operation ensures safety and optimal cutting performance.
5.1 Вклучување/исклучување
- To turn on the saw, press the green 'ON' button.
- To turn off the saw, press the red 'OFF' button. The saw will stop quickly.
5.2 Adjusting Blade Height and Angle
The saw blade's height and angle can be adjusted using a single hand manoeuvre.
- Прилагодување на висината: Rotate the adjustment wheel to raise or lower the blade. For optimal cutting, the blade should extend slightly above the workpiece.
- Прилагодување на аголот: Tilt the saw blade to the desired angle (up to 45°) for miter cuts. The maximum cutting height at 90° is 85mm, and at 45° is 65mm.
Слика 5.1: Icon indicating a 250mm saw blade diameter.
Слика 5.2: Icon showing maximum cutting depth of 85mm at a 90-degree angle.
Слика 5.3: Icon showing maximum cutting depth of 65mm at a 45-degree angle.
5.3 Using the Parallel Stop
The parallel stop is used for precise longitudinal cuts (ripping).
- Position the parallel stop to the desired width using the measurement scale on the table.
- Securely lock the parallel stop in place before starting the cut.
- Feed the workpiece steadily against the parallel stop and into the blade.
5.4 Using the Angle Stop
The angle stop allows for accurate miter cuts.
- Insert the angle stop into the T-slot on the table.
- Adjust the angle stop to the required angle (up to +/- 60°).
- Hold the workpiece firmly against the angle stop and feed it through the blade.
5.5 Екстракција на прашина
For a cleaner work environment and improved visibility, connect a suitable vacuum cleaner to the dust extraction port.
6. Одржување
Редовното одржување обезбедува долготрајност и безбедно работење на вашата пила.
- Чистење: After each use, unplug the saw and remove sawdust and debris from the table, blade guard, and motor housing using a brush or vacuum. Do not use solvents.
- Нега на сечилото: Inspect the saw blade regularly for sharpness and damage. A dull blade can cause kickback and poor cuts. Replace worn or damaged blades promptly.
- Подмачкување: Периодично подмачкувајте ги подвижните делови како што е наведено во деталното упатство за сервисирање (доколку е применливо).
- Инспекција на кабелот: Check the power cord for any signs of damage or fraying. Replace immediately if damaged.
- Guard Functionality: Ensure all safety guards move freely and return to their proper positions.
7 Смена на проблеми
Овој дел се однесува на вообичаени проблеми со кои може да се соочите.
| Проблем | Можна причина | Решение |
|---|---|---|
| Пила не започнува | Нема напојување; неисправен прекинувач; преоптоварување на моторот. | Check power connection and circuit breaker; contact service if switch is faulty; allow motor to cool. |
| Blade not cutting cleanly / burning wood | Dull blade; incorrect blade for material; improper feed rate. | Replace or sharpen blade; use appropriate blade type; adjust feed rate. |
| Прекумерни вибрации | Лабаво сечило; оштетено сечило; нестабилна поставеност. | Tighten blade nut; replace damaged blade; ensure saw is on a stable surface. |
| Лошо извлекување прашина | Clogged hose/port; vacuum not powerful enough. | Clear blockages; use a more powerful dust extractor. |
8. Спецификации
| Карактеристика | Спецификација |
|---|---|
| Модел | TC-TS 2025/2 U |
| Извор на енергија | Електричен со кабел |
| Ватtage | 2000 W |
| Voltage | 230 В |
| Дијаметар на сечилото на пилата | 250 мм |
| Максимална висина на сечење на 90° | 85 мм |
| Максимална висина на сечење на 45° | 65 мм |
| Angle Stop Adjustment | +/- 60 ° |
| Димензии на производот (Д x Ш x В) | 113.5 x 89.6 x 87 cm |
| Тежина на ставката | 19.2 кг |
9. Гаранција и поддршка
Einhell Power Tools come with a 2-year warranty as standard. An additional 1-year warranty is available upon registration of your product. To activate the additional services, Einhell products must be registered on our webсајт во рок од 30 дена од купувањето.
For customer service and support, please contact the helpline at: 0151 649 1500.
For more information and to register your product, please visit the official Einhell webсајт.
