BSIDE ADMS7 Smart Digital Multimeter and AVD06 Voltage Упатство за употреба на детектор

1. Вовед

This manual provides detailed instructions for the safe and effective use of the BSIDE ADMS7 Smart Digital Multimeter and the accompanying AVD06 Voltage Detector. The ADMS7 is a compact, auto-identifying digital multimeter designed for various electrical measurements, featuring a large 3-line LCD display and an analog bargraph. The AVD06 is a non-contact voltage detector for identifying live and neutral wires.

2. Информации за безбедност

ПРЕДУПРЕДУВАЊЕ: За да избегнете можен електричен удар, пожар или телесна повреда, прочитајте ги сите безбедносни информации пред да го користите производот.

• Секогаш придржувајте се до локалните и националните безбедносни кодови.
• Do not use the device if it appears damaged or if the test leads are damaged.
• Не применувајте повеќе од оценетиот томtagд, како што е означено на мерачот, помеѓу приклучоците или помеѓу кој било терминал и заземјување.
• Бидете внимателни кога работите со волtagнад 30V AC RMS, 42V врв или 60V DC. Овие волумениtagтие претставуваат опасност од шок.
• Држете ги прстите зад заштитниците за прсти на тест сондите за време на употребата.
• Веднаш заменете ја батеријата кога ќе се појави индикаторот за слаба батерија за да се обезбедат точни мерења.
• Не го користете мерачот во средини со експлозивен гас, пареа или прашина.

3. Карактеристики на производот

This image displays the BSIDE ADMS7 Smart Digital Multimeter on the right, featuring its large LCD screen, function buttons, and test lead inputs. To the left is the AVD06 Voltage Detector, showing its sensitivity dial and LED indicators. Both devices are presented alongside their respective test leads, highlighting the complete kit.

• Phone Size Design: Super-thin body and pocket-size design for portability and ease of use in various settings.
• Large Screen 3-Line Display: The large LCD screen can simultaneously display up to three test results, such as voltage, frequency, and an analog bar graph, for comprehensive readings.
• Automatic Identification Design: Автоматски детектира и мери јачина на звук на AC/DCtage, frequency (Hz), continuity, and resistance without requiring manual mode switching.
• Flashlight Design: Integrated flashlight for improved visibility in dimly lit work areas.
• Hang Hole Design: Allows for convenient storage and portability.
• Дизајн на Unibody: Eliminates the need to plug and unplug probes, saving time and preventing incorrect connections that could damage the multimeter.

4. Компоненти и содржина на пакувањето

Пакетот обично вклучува:

• BSIDE ADMS7 Smart Digital Multimeter
• AVD06 Voltagд Детектор
• Тест кабли (црвена и црна)
• Упатство за употреба (овој документ)
• Carrying Pouch (may vary by package)

5. Поставување

5.1 Battery Installation (ADMS7 Multimeter)

The ADMS7 Multimeter is powered by internal batteries. If the low battery indicator appears on the display, replace the batteries. Refer to the maintenance section for battery replacement instructions.

5.2 Connecting Test Leads (ADMS7 Multimeter)

1. Ensure the multimeter is powered off before connecting or disconnecting test leads.
2. The ADMS7 features a unibody design with integrated test leads. Ensure they are securely attached to the meter.
3. For most measurements, the red lead is for the positive (+) connection and the black lead is for the negative (-) or common connection.

5.3 Battery Installation (AVD06 Voltage Detector)

The AVD06 Voltage Detector requires batteries for operation. Open the battery compartment (usually at the rear or base) and insert the specified battery type, observing polarity. Close the compartment securely.

6. Operating Instructions (BSIDE ADMS7 Multimeter)

6.1 Вклучување/исклучување

Притиснете го копчето за напојување (⏻) to turn the multimeter on or off. The device features an auto-power-off function to conserve battery life.

6.2 Automatic Identification Mode

The ADMS7 automatically identifies the measurement type (AC/DC voltage, resistance, continuity, frequency) when the test leads are connected to a circuit. No manual range or function selection is typically required for these basic measurements.

6.3 AC томtagд и Мерење на фреквенција

This image shows the BSIDE ADMS7 Multimeter displaying an AC voltage reading of "228.8 V" and a frequency reading of "50.0 Hz". The multimeter is held by a gloved hand, with its test leads connected to electrical wiring, demonstrating its capability to automatically identify and display both voltage and frequency simultaneously in AC mode.

1. Проверете дали проводните кабли се правилно поврзани.
2. Touch the red test lead to the live terminal and the black test lead to the neutral terminal of the AC circuit.
3. The multimeter will automatically display the AC voltage and frequency on the screen.

6.4 DC Voltagд Мерење

This image illustrates the BSIDE ADMS7 Multimeter measuring DC voltage. The display shows "12 V", indicating a 12-volt DC reading. The multimeter's test leads are connected to the terminals of a car battery, demonstrating its automatic identification and measurement of DC voltage.

1. Connect the red test lead to the positive (+) terminal and the black test lead to the negative (-) terminal of the DC source.
2. The multimeter will automatically display the DC voltage.

6.5 Мерење на отпор

This image shows the BSIDE ADMS7 Multimeter performing a resistance test. The display reads "88 Ω", indicating a resistance value of 88 ohms. The multimeter's test leads are placed on components of a circuit board, demonstrating its ability to automatically measure resistance.

1. Пред мерење на отпорот, проверете дали колото или компонентата се исклучени од струја.
2. Connect the test leads across the component or circuit where resistance is to be measured.
3. The multimeter will automatically display the resistance value in Ohms (Ω).

6.6 V-Alert (Non-Contact Voltagд откривање)

This image highlights the V-Alert function of the BSIDE ADMS7 Multimeter. The multimeter's screen displays "V-Alert Live", indicating the detection of live voltage without direct contact. A table is included, explaining the different alert ranges: "Low range" (L area, slow alarm), "Mid-range" (M area, quick alarm), and "High-range" (H area, very loud alarm), corresponding to the intensity of the detected voltagе поле.

The V-Alert function allows for non-contact detection of AC voltage. This is useful for quickly identifying live wires without direct contact.

1. Activate the V-Alert mode (if not automatically engaged).
2. Bring the top end of the multimeter close to the wire or outlet you wish to test.
3. The display will show "V-Alert" and an analog bar graph will indicate the strength of the detected voltage. An audible alarm will also sound, with intensity varying based on voltage strength (as per the table in the image).

6.7 Функција HOLD

Притиснете го копчето „ЗАДРЖИ“ за да го замрзнете тековното отчитување на екранот. Притиснете го повторно за да го ослободите задржувањето и да продолжите со отчитувањата во живо.

7. Operating Instructions (AVD06 Voltage Detector)

This image displays the AVD06 Voltage Detector, showcasing its ergonomic design, sensitivity adjustment dial, and LED indicator lights. The device is designed for non-contact voltage detection, providing a safe way to identify live electrical circuits.

This image demonstrates the AVD06 Voltage Detector's capability to distinguish between live and neutral wires within complex electrical wiring. Two panels show the detector's LED indicators: on the left, it indicates a "Neutral Wire" with fewer lit LEDs, and on the right, it indicates a "Live Wire" with more lit LEDs and a stronger alert, providing clear visual feedback for wire identification.

The AVD06 is a non-contact voltage detector used to quickly check for the presence of AC voltage in wires, cables, circuit breakers, lighting fixtures, switches, outlets, and more.

1. Вклучување: Turn the rotary switch to the "ON" position. The indicator lights will briefly flash, and a beep may sound, indicating it's ready.
2. Прилагодување на чувствителност: Use the sensitivity dial to adjust the detection range. Higher sensitivity allows detection from a greater distance, while lower sensitivity requires closer proximity.
3. Откривање: Bring the tip of the detector close to the object to be tested.
4. Индикација: Ако AC voltage is detected, the LED indicators will light up, and an audible alarm will sound. The number of lit LEDs and the frequency of the beep typically increase with the strength of the detected voltage.
5. Distinguishing Live/Neutral: When testing a live wire, more LEDs will illuminate, and the alarm will be more frequent/louder. For a neutral wire, fewer LEDs may light up, or the alarm may be less intense, or no detection may occur depending on the circuit.
6. Исклучено: Turn the rotary switch to the "OFF" position when finished.

8. Одржување

8.1 Чистење

Избришете го случајот со рекламаamp крпа и благ детергент. Не користете абразивни средства или растворувачи. Чувајте ги мерните сонди чисти и без остатоци.

8.2 Battery Replacement (ADMS7 Multimeter)

When the low battery indicator appears on the display, replace the batteries. Open the battery compartment cover on the back of the multimeter, remove the old batteries, and insert new ones of the specified type, observing polarity. Securely close the compartment.

8.3 Складирање

If the device is not used for a long period, remove the batteries to prevent leakage. Store the multimeter and detector in a cool, dry place, away from direct sunlight and extreme temperatures.

9 Смена на проблеми

• Нема екран/вклучување: Проверете ја инсталацијата на батериите и осигурајте се дека батериите не се испразнети. Заменете ги доколку е потребно.
• Неточни читања: Ensure test leads are properly connected. Check battery level. Ensure you are using the correct measurement technique for the circuit.
• No V-Alert Detection: Ensure the V-Alert function is active. Adjust sensitivity if applicable. Ensure the device is close enough to the voltagе извор.
• Multimeter Does Not Respond: Try turning the device off and on again. If issues persist, contact customer support.

10. Спецификации

11. Гаранција и поддршка

For warranty information or technical support, please refer to the product packaging or contact the retailer from whom the product was purchased. Keep your purchase receipt as proof of purchase.