Вовед
This manual provides detailed instructions for the Transformers Studio Series 66 Leader Class Constructicon Overload action figure. This figure is inspired by the iconic movie scenes from Transformers: Revenge of the Fallen and is designed with specific details to reflect the Transformers movie universe. Constructicon Overload is an 8.5-inch collectible figure that converts between robot and articulated dump truck modes.
The figure is also a component of the larger Constructicon Devastator assembly. Please read all instructions carefully before handling the product.
Информации за безбедност
Warning: Choking Hazard – Small parts may be generated. Not for children under 3 years.
Recommended age for this product is 8 years and up.
Што има во кутијата
Вашиот пакет треба да ги содржи следните ставки:
- 1x Constructicon Overload Action Figure
- 1x Detailed Accessory
- 1x Removable Backdrop (for display)
- 1x Instruction Sheet (this document)
Поставување и трансформација
The Constructicon Overload figure can convert between two primary modes: Robot Mode and Articulated Dump Truck Mode. The transformation process involves 34 steps. Refer to the visual guides and video below for assistance.
Режим на робот
In Robot Mode, Constructicon Overload stands at 8.5 inches tall. This mode features high articulation, allowing for various poses. The included accessory can be attached to the figure in this mode.
Articulated Dump Truck Mode
To convert the figure into its Articulated Dump Truck Mode, carefully follow the 34-step transformation sequence. Ensure all panels and joints are securely tabbed into place to form a cohesive vehicle. This mode is designed to resemble the character's appearance as a dump truck.
Transformation Video Guide
Official video demonstrating the transformation of the Transformers Studio Series Leader Overload figure between robot and vehicle modes.
For a visual walkthrough of the transformation, please refer to the embedded video. Pay close attention to the sequence and ensure all parts are aligned correctly to prevent damage.
Упатства за работа
Позирање на фигурата
The Constructicon Overload figure features multiple points of articulation. Carefully manipulate the joints to achieve desired poses. Avoid excessive force, as this may damage the figure.
Combining with Devastator
Constructicon Overload is designed to combine with other Constructicon figures from the Studio Series to form the larger Constructicon Devastator. This figure typically forms the abdomen section of Devastator. Refer to the individual instruction manuals of the other Constructicon figures for their specific transformation and combination steps. Ensure all connection points are secure when combining figures.
The removable backdrop included with the figure can be used to display Constructicon Overload in the Pyramid Desert Battle scene, enhancing your display options.
Одржување
- Чистење: Use a soft, dry cloth to gently wipe dust from the figure. Avoid using harsh chemicals or abrasive materials, as these can damage the paint or plastic.
- Складирање: Store the figure in a cool, dry place away from direct sunlight and extreme temperatures to prevent discoloration or warping.
- Ракување: Always handle the figure by its main body parts. Avoid pulling or twisting small, delicate components with excessive force.
Решавање проблеми
- Тешкотија при трансформација: If you encounter resistance during transformation, do not force the parts. Re-examine the instruction steps and the transformation video to ensure correct alignment. Sometimes, a specific panel needs to be moved or rotated before another can articulate.
- Лабави зглобови: Over time, some joints may become slightly loose. This is common with articulated figures. For minor looseness, a small amount of clear nail polish or a specialized joint tightener can be applied to the joint and allowed to dry, but proceed with caution.
- Parts Not Tabbing: Ensure all tabs and slots are correctly aligned. Sometimes, a slight adjustment to an adjacent part is needed for a tab to fully engage.
Спецификации
- Димензии на производот: 4.02 x 9.25 x 10.98 инчи
- Тежина на ставката: 1.15 фунти
- Број на модел: Е7217
- Препорачана возраст од производителот: 8 години па нагоре
- Датум на издавање: 28 август 2020 година
- Производител: Хасбро
Гаранција и поддршка
For information regarding product warranty or technical support, please refer to the official Hasbro webстраницата или контактирајте го нивниот оддел за услуги на клиентите. Зачувајте ја сметката за купување како доказ за купување.
Official Transformers Webсајт: Visit the Transformers Store
