1. Вовед
This manual provides essential information for the installation, operation, and maintenance of your Ohlins STX36 Scooter Rear Shock, model HO919. This high-performance shock absorber is designed to enhance the ride quality and handling of your 2019 Honda Z125M. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Информации за безбедност
Предупредување: Installation and service of shock absorbers should only be performed by qualified personnel with appropriate tools and experience. Improper installation or adjustment can lead to serious injury or damage to the vehicle.
- Секогаш носете соодветна лична заштитна опрема (ППЕ) за време на инсталацијата и одржувањето.
- Ensure the vehicle is securely supported before beginning any work.
- Never attempt to disassemble the shock absorber. It contains high-pressure gas and oil, which can cause injury if released improperly.
- Погледнете го сервисното упатство на вашето возило за специфични спецификации и процедури за вртежен момент.
- After installation, always perform a functional check of the suspension and brakes before riding.
3. Производот завршиview
The Ohlins STX36 Scooter Rear Shock (HO919) is a high-quality, adjustable mono-tube shock absorber. It features a 36mm piston diameter, designed for optimal performance and durability. Key components include the spring, spring preload adjuster, and damping adjusters (if equipped).
Image: Two Ohlins STX36 Scooter Rear Shocks, featuring bright yellow springs and silver-colored bodies, designed for rear suspension applications. The shocks are shown side-by-side, highlighting their robust construction and adjustable components.
4. Поставување и инсталација
Забелешка: Професионална инсталација е најпрепорачлива за овој производ.
- Подготовка: Secure the motorcycle on a stand, ensuring the rear wheel is off the ground. Remove any bodywork necessary to access the original rear shock absorber.
- Removal of Original Shock: Carefully unbolt the original shock absorber from its upper and lower mounting points. Retain all original hardware unless new hardware is provided.
- Installation of Ohlins Shock: Position the new Ohlins STX36 shock absorber. Install the upper and lower mounting bolts, ensuring they are correctly aligned. Do not fully tighten bolts at this stage.
- Спецификации за вртежен момент: Refer to your Honda Z125M service manual for the correct torque specifications for the shock mounting bolts. Tighten all bolts to the specified values.
- Проверка на распродажба: Before reassembling bodywork, check for adequate clearance between the shock absorber and all surrounding components throughout the full range of suspension travel.
- Завршно собрание: Reinstall any removed bodywork.
5. Работење и прилагодување
The STX36 shock absorber offers adjustability to fine-tune your scooter's handling characteristics. Always make adjustments in small increments and test the changes in a safe environment.
- Пролетно претходно вчитување: Adjusting the spring preload changes the initial compression of the spring, affecting ride height and sag. Use the provided tool to turn the preload adjusters. Increase preload for a firmer ride or to compensate for heavier loads.
- Отскокнување Дamping (if equipped): Враќање гamping controls the speed at which the shock extends after compression. Adjustments are typically made via a clicker knob at the bottom of the shock. Turn clockwise for slower rebound, counter-clockwise for faster rebound.
- Компресија Дamping (if equipped): Компресија гamping controls the speed at which the shock compresses. Adjustments are typically made via a clicker knob on the reservoir or body. Turn clockwise for firmer compression, counter-clockwise for softer compression.
Consult an Ohlins authorized service center or a suspension specialist for personalized setup advice.
6. Одржување
Regular maintenance ensures the longevity and optimal performance of your Ohlins STX36 rear shock.
- Чистење: Keep the shock absorber clean from dirt, dust, and road grime. Use mild soap and water, then rinse thoroughly. Avoid high-pressure washers directly on seals.
- Инспекција: Periodically inspect the shock for any signs of oil leaks, damage to the shaft, spring, or mounting points. Check for loose bolts.
- Интервали на сервисирање: Ohlins recommends regular service by an authorized service center. Service intervals depend on usage, but typically every 1-2 years or after significant mileage.
- Складирање: If storing the vehicle for an extended period, ensure the shock is clean and stored in a dry environment.
7 Смена на проблеми
This section addresses common issues you might encounter with your rear shock absorber.
| Проблем | Можна причина | Решение |
|---|---|---|
| Poor ride comfort / Harsh ride | Excessive spring preload, too much compression damping, incorrect spring rate. | Reduce spring preload, reduce compression damping, consult a specialist for spring rate. |
| Excessive bottoming out | Insufficient spring preload, too little compression damping, incorrect spring rate. | Increase spring preload, increase compression damping, consult a specialist for spring rate. |
| Rear end feels loose / Unstable | Too fast rebound damping, insufficient compression dampинг. | Зголемете го отскокнувањето гamping (slower), increase compression damping (firmer). |
| Истекување масло | Damaged seals, internal component failure. | Contact an authorized Ohlins service center for inspection and repair. Do not attempt to repair yourself. |
If you experience issues not listed here or if the suggested solutions do not resolve the problem, contact an authorized Ohlins service center.
8. Спецификации
| Бренд | Олинс |
| Модел | HO919 (STX36) |
| Број на дел од производителот | HO919 |
| Тежина на ставката | 8.38 фунти |
| Димензии на производот | 23.3 x 9.3 x 7.3 инчи |
| Позиција на автодел | Заден дел |
| Тип на услуга на возило | Motorcycle (Honda Z125M) |
| Надворешен финиш | Насликани |
9. Гаранција и поддршка
Ohlins products are manufactured to high standards and come with a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official Ohlins website or contact your authorized Ohlins dealer.
For technical support, service, or spare parts, please contact an authorized Ohlins service center or visit the official Ohlins website for dealer locator information. Always provide your product model (HO919) and purchase details when seeking support.
Официјални Олинс Webсајт: www.ohlins.com
