1. Вовед
Thank you for choosing the LEDVANCE 360DEG Wall Sensor. This device is designed to provide efficient and automated lighting control for outdoor environments, enhancing both convenience and energy savings. This manual provides essential information for the safe installation, operation, and maintenance of your sensor.
2. Информации за безбедност
Внимателно прочитајте ги овие безбедносни упатства пред инсталација и работа. Непочитувањето на овие упатства може да резултира со електричен удар, пожар или други опасности.
- Професионална инсталација: Installation must be carried out by a qualified electrician in accordance with all local and national electrical codes.
- Исклучување на струја: Секогаш исклучувајте го напојувањето на прекинувачот пред да го инсталирате, сервисирате или чистите уредот.
- Voltage: Обезбедете снабдување voltage matches the device's requirements (230 Volt AC).
- Еколошки услови: The device has an IP55 protection rating, making it suitable for outdoor use and protected against dust and low-pressure water jets. However, avoid direct exposure to extreme weather conditions beyond its specified operating range (-20°C to +40°C).
- Измена: Do not modify or alter the device in any way. Unauthorized modifications may void the warranty and create safety hazards.
3. Содржина на пакетот
Проверете дали сите компоненти се присутни пред да започнете со инсталацијата:
- 1x LEDVANCE 360DEG Wall Sensor device
4. Карактеристики на производот
- Stand-alone motion and light sensor for wall mounting.
- 360° detection field for comprehensive coverage.
- Optimized for energy saving.
- Three selectable operating modes: continuous light on, activation by motion, or activation by twilight.
- Zero-crossing circuit optimized for the operation of LED luminaires.
- IP55 protection type, suitable for outdoor use.
- Designed to be disassembled for separate control of internal light sources (if applicable).
5. Поставување и инсталација
The LEDVANCE 360DEG Wall Sensor is designed for wall mounting. Refer to the following diagrams and instructions for proper installation.

Слика 5.1: Dimensions of the LEDVANCE 360DEG Wall Sensor. The sensor measures 7.6 cm in width, 9.5 cm in depth, and 11.1 cm in height.

Слика 5.2: Одблиску view of the LEDVANCE 360DEG Wall Sensor unit, showing its black polycarbonate housing and the spherical detection lens at the bottom.
5.1 Локација за монтирање
- Choose a wall location that provides the desired detection coverage. The sensor has a 360° detection field and a maximum detection distance of 10 meters.
- Avoid mounting near heat sources, air conditioning vents, or areas with direct sunlight, as these can interfere with sensor performance.
- Ensure the mounting surface is stable and can support the device's weight (250 grams).
5.2 Електрично поврзување
- ПРЕДУПРЕДУВАЊЕ: Исклучете го напојувањето пред да направите било какви електрични приклучоци.
- Connect the sensor to a 230 Volt AC power supply.
- Follow the wiring diagram provided with the product packaging for correct connections. Ensure all connections are secure and insulated.
- The zero-crossing circuit is optimized for LED luminaires.
6. Упатства за работа
The LEDVANCE 360DEG Wall Sensor offers flexible operation modes and adjustable settings.
6.1 Работни режими
The sensor features three selectable operating modes:
- Continuous Light On: The connected light remains continuously on, bypassing sensor detection.
- Activation by Motion: The connected light turns on when motion is detected within the 360° field.
- Activation by Twilight: The connected light turns on when ambient light levels fall below a set threshold (twilight) and motion is detected.
Refer to the product's internal settings or external switches (if present) to select the desired mode. Note that some settings may require opening the device, which should only be done by a qualified professional.
6.2 Detection Settings
The sensor allows for adjustment of the light duration after detection:
- Времетраење на светлината: The duration for which the light remains on after motion detection can typically be set between 2 seconds and 15 minutes. Adjust this setting according to your preference and energy-saving goals.
7. Одржување
The LEDVANCE 360DEG Wall Sensor requires minimal maintenance.
- Чистење: Периодично чистете ја леќата и куќиштето на сензорот со мека, дamp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
- Инспекција: Regularly inspect the device for any signs of damage or wear. If any damage is found, disconnect power and contact a qualified electrician for repair or replacement.
8 Смена на проблеми
If you experience issues with your LEDVANCE 360DEG Wall Sensor, refer to the following common problems and solutions:
- Светлото не се вклучува:
- Проверете дали напојувањето е поврзано и дали е активно.
- Verify the operating mode is set correctly (e.g., 'Activation by Motion' or 'Activation by Twilight').
- Ensure the detection area is clear of obstructions.
- Adjust the sensitivity settings if available.
- Светлото останува вклучено континуирано:
- Check if the operating mode is set to 'Continuous Light On'.
- Ensure no constant motion is occurring within the detection zone.
- Light turns on unexpectedly:
- Check for environmental factors like moving branches, small animals, or sudden temperature changes that might trigger the sensor.
- Adjust the sensor's sensitivity or detection range if possible.
Ако проблемот продолжи откако ќе се обидете со овие решенија, контактирајте ја службата за корисници или квалификуван електричар.
9. Спецификации
| Бренд | LEDVANCE |
| Број на модел | 4058075244832 |
| Код на производот | SENSOR WALL 360DEG IP55 DG LEDV |
| Димензии (Д x Ш x В) | 7.6 x 9.5 x 11.1 cm |
| Тежина | 250 грама |
| Материјал | Поликарбонат |
| Боја | Црното |
| Voltage | 230 волти |
| Извор на енергија | AC |
| Оценка за заштита | IP55 |
| Тип на монтирање | Монтирање на ѕид |
| Поле за откривање | 360 степени |
| Max. Detection Distance | 10 метри |
| Работни режими | Continuous On, Motion Activated, Twilight Activated |
| Light Duration Adjustment | 2 seconds to 15 minutes (approx.) |
| Компатибилност на типот на сијалица | LED |
10. Гаранција и поддршка
The LEDVANCE 360DEG Wall Sensor comes with a 3-годишна гаранција од производителот од датумот на купување, покривајќи дефекти во материјалите и изработката при нормална употреба.
For technical support, warranty claims, or further assistance, please visit the official LEDVANCE store or contact their customer service department. You can find more information and contact details on the LEDVANCE Brand Store.
Ве молиме зачувајте го доказот за купување за целите на гаранцијата.





