Dlyfull UT4 Universal 4-Slot Battery Charger Instruction Manual

1. Вовед

The Dlyfull UT4 is a versatile 4-slot battery charger designed to accommodate a wide range of rechargeable battery types, including Li-ion, IMR, INR, ICR, Ni-MH, Ni-Cd, and LiFePO4. It features multiple operating modes such as Charge, Discharge, Refresh, and Test, along with a USB power bank function. This manual provides detailed instructions for safe and efficient use of your Dlyfull UT4 charger.

2. Безбедносни мерки на претпазливост

• Use the charger only with compatible battery types as specified in this manual. Attempting to charge incompatible batteries may result in damage or injury.
• Не расклопувајте, не модифицирајте или не предизвикувајте краток спој на полначот.
• Избегнувајте изложување на полначот на вода, висока влажност или екстремни температури.
• Чувајте го полначот подалеку од деца и домашни миленици.
• Обезбедете соодветна вентилација за време на работата за да спречите прегревање.
• Disconnect the power supply when the charger is not in use or during cleaning.
• If any unusual behavior or damage is observed, discontinue use immediately and contact support.
• Забелешка: Batteries are not included with this product.

3. Производот завршиview

3.1 Компоненти

The Dlyfull UT4 charger features four independent charging slots, an LCD display, and two control buttons.

Слика: напред view of the Dlyfull UT4 charger, showing the LCD screen, four battery slots, and two control buttons (MODE and SLOT).

3.2 Клучни карактеристики

• Универзална компатибилност: Supports 3.7V Li-ion, 3.2V LiFePO4, IMR, INR, ICR, and 1.2V Ni-MH/Ni-Cd batteries.
• Повеќе режими на работа: Charge, Discharge, Refresh, and Test.
• Интелигентен LCD дисплеј: A high-resolution LCD screen displays current operating mode, battery type, voltage (V), current (A), capacity (mAh), temperature (°C), and time (h), providing comprehensive status information.
• Брзо полнење: The charger utilizes adaptive current technology, automatically adjusting the charging current up to 2A. A 2000mAh battery can be fully charged in approximately 1 hour. Input: USB Type-C 5V/2A.
• Функција на USB Power Bank: Use a Li-ion battery in slot 1 to charge external devices via the USB output (5V/2A).
• Безбедносна заштита: The charger incorporates overcharge, overcurrent, overvoltage, контрола на температурата и заштита од краток спој.
• Влез USB од тип C: 5V/2A input for power supply.

Image: The Dlyfull UT4 charger with icons representing its safety features: overcharge protection, overcurrent protection, overvoltage protection, temperature control, and short-circuit protection.

4. Поставување

1. Поврзете напојување: Connect the USB Type-C cable to the charger's input port and the other end to a 5V/2A USB power adapter (not included), PC, car charger, or power bank.


Image: The Dlyfull UT4 charger with its USB-C input port, illustrating connection to a USB adapter, PC, car charger, solar panel, or power bank.

2. Вметнете батерии: Carefully insert up to four compatible rechargeable batteries into the charging slots. Ensure correct polarity (+/-). The charger will automatically detect Ni-MH/Ni-Cd/Li-Ion batteries. For LiFePO4 batteries, manual selection is required (see Operating Modes).

5. Работни режими

The Dlyfull UT4 offers four primary operating modes: Charge, Discharge, Refresh, and Test. Use the РЕЖИМ и ПРОЦЕП buttons to navigate and select functions.

Image: The Dlyfull UT4 charger's LCD screen displaying the available modes (Charge, Discharge, Refresh, Test) and battery slot indicators, with labels for battery type, voltage, capacity, temperature, current, and time.

5.1 Избор на режим

1. After inserting a battery, the charger will display information for that slot.
2. Притиснете го ПРОЦЕП button to select the desired battery slot (1, 2, 3, or 4).
3. Притиснете го РЕЖИМ button to cycle through the available operating modes: Charge, Discharge, Refresh, Test.
4. Once the desired mode is selected, the operation will begin automatically after a few seconds of inactivity, or you can press the РЕЖИМ копчето повторно за да потврдите.
5. For LiFePO4 batteries, after inserting, press the РЕЖИМ button to manually select "LiFePO4" as the battery type.

Image: A close-up showing fingers interacting with the 'MODE' and 'SLOT' touch buttons on the Dlyfull UT4 charger's interface.

5.2 Mode Descriptions

• Наплата: Standard charging function. The charger will automatically detect the battery type (except LiFePO4) and apply an adaptive charging current.
• Испуштање: Discharges the battery to eliminate memory effect, particularly useful for Ni-Cd batteries.
• Освежи: Cycles the battery through discharge and charge cycles to restore its maximum capacity, often used for older batteries.
• Тест: Measures and displays the actual capacity of the battery by fully discharging and then fully charging it. This process can take several hours.

5.3 Функција на енергетска банка

The Dlyfull UT4 can function as a power bank to charge external devices. This function is available when a Li-ion battery is inserted into Слот 1.

1. Ensure a charged Li-ion battery is in Slot 1.
2. Disconnect the charger from its main power input (USB-C).
3. Connect your external device (e.g., smartphone, MP3 player, tablet) to the USB-A output port on the charger.
4. The charger will begin supplying 5V/2A power to your device.

Image: The Dlyfull UT4 charger with a Li-ion battery in slot 1, connected via its USB-A output to a smartphone, demonstrating its power bank capability.

6. Compatible Batteries

The Dlyfull UT4 charger supports a wide range of battery sizes and chemistries:

• 3.7V Li-ion / IMR / INR / ICR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123A), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650, 32650.
• 3.2V LiFePO4: (Same sizes as Li-ion, manual selection required).
• 1.2V Ni-MH / Ni-Cd: A, AA, AAA, AAAA, C, SC, D.

Image: A visual representation of the Dlyfull UT4 charger's compatibility with various battery types, including 1.2V Ni-MH/Ni-Cd and 3.6V/3.7V Li-ion, and 3.2V LiFePO4 batteries, listing common sizes.

7. Информации за LCD дисплеј

The intelligent LCD screen provides comprehensive real-time data:

• Режим: Indicates the current operating mode (Charge, Discharge, Refresh, Test).
• Тип на батерија: Displays detected or selected battery chemistry (Li-ion, LiFePO4, Ni-MH/Ni-Cd).
• Voltagд (V): Тековната батерија волtage.
• Струја (А): Current charging or discharging ampбес
• Капацитет (mAh): Accumulated capacity during charge/discharge or tested capacity.
• Температура (°C): Internal temperature of the charger or battery.
• Time (h): Elapsed time for the current operation.
• Број на слот: Indicates which battery slot's information is currently displayed.

8. Одржување

• Clean the charger regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Keep the charging slots free from dust and debris to ensure proper contact.
• Чувајте го полначот на ладно и суво место кога не го користите.
• Избегнувајте испуштање или изложување на полначот на силни удари.

9 Смена на проблеми

10. Спецификации

• Влез: USB Type-C 5V/2A
• Output (Charging): Adaptive current (up to 2A per slot, automatically adjusted)
• Output (USB Power Bank): 5V/2A (from Slot 1 with Li-ion battery)
• Компатибилни типови батерии:
  • 3.7V Li-ion / IMR / INR / ICR (e.g., 18650, 21700, 26650)
  • 3.2V LiFePO4 (manual selection required)
  • 1.2V Ni-MH / Ni-Cd (e.g., AA, AAA, C, D)
• Работни режими: Charge, Discharge, Refresh, Test
• Прикажи: LCD со позадинско осветлување
• Тежина: 279.99 грама
• UPC: 742354393468

11. Гаранција и поддршка

For warranty information and technical support, please refer to the official Dlyfull webлокација или контактирајте го вашиот продавач. Чувајте ја сметката како доказ за купување.

Manufacturer: Dlyfull