Phanteks Evolv X2 Mid-Tower Gaming Chassis User Manual

Вовед

This manual provides detailed instructions for the Phanteks Evolv X2 Mid-Tower Gaming Chassis. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance of your system.

Слика: Предна страна view of the Phanteks Evolv X2 Mid-Tower Gaming Chassis, showcasing its tempered glass panels and internal structure.

Содржина на пакетот

Проверете дали сите компоненти се присутни пред да продолжите со инсталацијата:

• Phanteks Evolv X2 Chassis
• Accessory Box (screws, zip ties, manual)
• D-RGB Lighting Cables
• Дополнителен хардвер за монтирање

Поставување и инсталација

Follow these steps for proper installation of your components into the Phanteks Evolv X2 chassis.

1. Подготовка на шасијата

Carefully remove the tempered glass panels. Refer to the accessory box for specific instructions on panel removal to prevent damage.

Слика: Внатрешна view of the Phanteks Evolv X2 chassis, showing the spacious layout for component installation.

2. Инсталација на матична плоча

The Evolv X2 supports ATX, Micro ATX, and Mini ITX motherboards. Install standoffs as required for your motherboard form factor. Secure the motherboard using the provided screws.

This chassis also supports ATX rear-connect mainboards, which can simplify cable management by routing connections to the rear of the motherboard tray.

Image: Close-up of the motherboard tray within the Phanteks Evolv X2, highlighting mounting points and cable routing options.

3. Инсталација на напојување

The power supply unit (PSU) is mounted at the front of the chassis. Secure the PSU using the provided screws.

4. Инсталација на диск за складирање

Install your 2.5-inch and 3.5-inch storage drives into the designated bays. Refer to the accessory box for specific mounting hardware and locations.

5. Cooling System Configuration

The Evolv X2 features a vertical cooling system designed for optimal airflow. It supports:

• Bottom Intake: Triple 120mm fan positions for air intake.
• Top Exhaust: Triple 120mm fan positions with dedicated 360mm radiator clearance for exhaust.
• Заден издув: One 120mm fan position.

Ensure fans are oriented correctly for intake and exhaust to maintain efficient airflow.

Слика: View of the bottom fan mounting positions in the Phanteks Evolv X2, designed for air intake.

Слика: Горе view of the Phanteks Evolv X2, showing the fan and radiator mounting area for exhaust.

Image: Diagram illustrating the vertical airflow path within the Phanteks Evolv X2 chassis, with air entering from the bottom and exiting from the top.

6. Инсталација на графичка картичка

Install your graphics card into the appropriate PCIe slot on your motherboard. Ensure it is securely fastened. The chassis provides ample space for high-end GPUs up to 380mm in length.

Слика: Внатрешна view of the Phanteks Evolv X2, showcasing a graphics card installed and integrated D-RGB lighting.

7. Управување со кабли

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics. The design supports ATX rear-connect mainboards for a cleaner setup.

Image: A fully assembled Phanteks Evolv X2 system demonstrating effective cable management and component layout.

8. D-RGB Lighting Connection

Connect the integrated D-RGB lighting cables to your motherboard's D-RGB header or a compatible D-RGB controller. Refer to your motherboard manual for specific D-RGB header locations.

Упатства за работа

Once all components are installed and connected, replace the tempered glass panels. Connect your peripherals and power cable, then power on your system.

The integrated D-RGB lighting can be controlled via compatible motherboard software or an external D-RGB controller, allowing for customization of lighting effects and colors.

Одржување

Regular maintenance helps ensure the longevity and performance of your chassis and components.

• Филтри за прашина: Periodically clean the dust filters located at the intake points (e.g., bottom of the chassis) to maintain optimal airflow and prevent dust buildup inside the system.
• Панели од калено стакло: Clean the tempered glass panels with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that may damage the glass or coatings.
• Чистење на ентериерот: Користете компримиран воздух за отстранување на прашина од внатрешните компоненти и перките на вентилаторот. Пред чистење, проверете дали системот е исклучен од струја и исклучен од струја.

Решавање проблеми

Овој дел се однесува на вообичаени проблеми со кои може да се соочите.

• Системот не се вклучува:
  • Verify all power cables are securely connected to the motherboard, graphics card, and power supply.
  • Осигурајте се дека прекинувачот за напојување е во положба „ВКЛУЧЕНО“.
  • Проверете ги врските на предниот панел со матичната плоча (Power SW, Reset SW).
• D-RGB осветлувањето не работи:
  • Confirm D-RGB cables are correctly connected to the motherboard's D-RGB header or a dedicated controller.
  • Ensure D-RGB software (if applicable) is installed and configured correctly.
• Слаб проток на воздух/високи температури:
  • Check fan orientation; intake fans should draw air in, exhaust fans should push air out.
  • Исчистете ги филтрите за прашина и внатрешните компоненти.
  • Ensure no cables are obstructing airflow paths.

Спецификации

Информации за гаранцијата

For detailed warranty information regarding your Phanteks Evolv X2 chassis, please refer to the official Phanteks webлокација или гарантната картичка вклучена со вашиот производ. Условите за гаранција може да се разликуваат во зависност од регионот.

Поддршка

If you require further assistance or have questions not covered in this manual, please visit the official Phanteks support webстраница за често поставувани прашања, драјвери и информации за контакт.

Visit Phanteks Support