DSC PG9985 PowerSeries Neo Wireless PowerG Flood Detector User Manual

1. Вовед

The DSC PG9985 PowerSeries Neo Wireless PowerG Flood Detector is designed to provide early warning of water leaks and potential flooding in residential and commercial environments. This device utilizes PowerG wireless technology for secure and reliable communication with compatible DSC PowerSeries Neo security systems. It is an essential component for protecting property from water damage by detecting the presence of water at critical locations.

2. Информации за безбедност

Please read and understand all safety instructions before installing and operating this device. Failure to follow these instructions may result in damage to the product, property, or personal injury.

• Ракување со батерии: Use only the specified battery type. Do not mix old and new batteries. Dispose of used batteries according to local regulations.
• Поставување: Ensure the detector is placed in an area where it will not be exposed to extreme temperatures, direct sunlight, or excessive humidity, unless specifically designed for such conditions.
• Одржување: Не обидувајте се да го поправите или модифицирате уредот. Сите сервиси обратете се на квалификуван персонал.
• Изложеност на вода: While designed to detect water, the main unit itself is not waterproof and should not be submerged. Only the sensor probe is designed for direct contact with water.

3. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• DSC PG9985 Wireless Flood Detector Main Unit
• Wired Flood Sensor Probe
• Монтажни материјали (завртки, сидра)
• Водич за инсталација (овој документ)

4. Производот завршиview

The DSC PG9985 consists of a main wireless transmitter unit and a wired flood sensor probe. The main unit communicates with your security system, while the probe detects water.

Слика 1: DSC PG9985 Wireless Flood Detector, showing the main unit connected to the wired sensor probe. The main unit is a compact white rectangular device, and the probe is a flat, white component with two metal contacts at its base, designed to be placed on a surface.

Слика 2: DSC PG9985 Wireless Flood Detector in a vertical orientation, highlighting the connection between the main unit and the wired sensor probe. This view emphasizes the compact design of both components.

4.1. Компоненти

• Главна единица: Houses the wireless transmitter, battery, and status indicator.
• Wired Flood Sensor Probe: Contains two metal contacts that detect the presence of water. It connects to the main unit via a cable.
• Status Indicator (LED): Provides visual feedback on the device's status (e.g., alarm, low battery, communication).
• Дупки за монтирање: Located on the sensor probe for secure installation.

5. Поставување и инсталација

Proper installation is crucial for the reliable operation of the flood detector.

5.1. Инсталација на батерија

1. Отворете го отворот на главната единицаasing.
2. Insert the specified Lithium battery, observing correct polarity.
3. Затворете го вasing securely. The LED may flash to indicate power-up.

5.2. Монтирање на главната единица

The main unit is designed for tabletop mounting or wall mounting near the area to be monitored. Ensure it is placed in a dry location, away from direct contact with water.

• Монтирање на маса: Place the main unit on a flat, stable surface within range of your PowerSeries Neo system.
• Монтирање на Wallид: Use the provided screws and anchors to secure the main unit to a wall. Ensure the mounting location allows for easy access to the battery compartment.

5.3. Placing the Flood Sensor Probe

The flood sensor probe should be placed at the lowest point of the area where water accumulation is expected.

• Position the probe with its metal contacts facing downwards, directly on the surface where water would first appear (e.g., basement floor, near a water heater, under a sink).
• Secure the probe using its mounting holes and screws if necessary, to prevent accidental displacement.
• Ensure the cable connecting the probe to the main unit is not pinched or damaged.

5.4. Enrolling with the PowerSeries Neo System

Refer to your PowerSeries Neo control panel's installation manual for specific enrollment procedures. Generally, the steps involve:

1. Access the system's programming menu.
2. Select the option to add a new wireless device or zone.
3. Activate the flood detector (e.g., by pressing a tamper switch or triggering a flood event) to transmit its unique ID to the panel.
4. Assign the detector to an appropriate zone and configure its attributes (e.g., 24-hour flood zone).
5. Test the communication and flood detection functionality.

6. Упатства за работа

Once installed and enrolled, the PG9985 operates automatically.

6.1. Water Detection

When water bridges the two metal contacts on the sensor probe, the detector will immediately transmit a flood alarm signal to the PowerSeries Neo control panel. The panel will then initiate the programmed response, which may include sounding an alarm, sending notifications, or activating other connected devices.

6.2. Индикатор за статус

The LED on the main unit provides visual status indications:

• Брзо трепкање: Indicates a flood alarm transmission.
• Бавно трепкање: May indicate a low battery condition or a communication issue.
• Без светлина: Normal standby operation or no power.

6.3. Тестирање на детекторот

Regular testing ensures the detector is functioning correctly.

1. Place a small amount of water (e.g., a few drops) on the metal contacts of the sensor probe.
2. Observe the main unit's LED for a rapid flash, indicating an alarm transmission.
3. Verify that your PowerSeries Neo system receives the flood alarm.
4. Dry the sensor probe thoroughly after testing.

7. Одржување

Minimal maintenance is required to keep your flood detector in optimal condition.

7.1. Замена на батеријата

When the system indicates a low battery for the PG9985, replace the battery promptly to ensure continuous protection.

1. Disarm your security system to prevent false alarms during battery replacement.
2. Отворете го отворот на главната единицаasing.
3. Remove the old battery and insert a new Lithium battery of the same type, ensuring correct polarity.
4. Затворете го вasing безбедно.
5. Test the detector after battery replacement to confirm proper operation.

7.2. Чистење

Periodically inspect the sensor probe for dirt, dust, or corrosion on the metal contacts. Clean with a soft, dry cloth. Do not use abrasive cleaners or solvents.

7.3. Редовно тестирање

It is recommended to test the flood detector at least once a month to ensure its functionality. Refer to Section 6.3 for testing procedures.

8 Смена на проблеми

If you encounter issues with your flood detector, refer to the following common problems and solutions.

If troubleshooting steps do not resolve the issue, contact your security system installer or technical support.

9. Спецификации

10. Гаранција и поддршка

For warranty information, please refer to the documentation provided with your DSC PowerSeries Neo security system or contact your authorized DSC dealer. Technical support is typically provided by your security system installer or the dealer from whom you purchased the product.

For further assistance, please contact your local DSC representative or visit the official DSC webсајт.