1. Вовед
The TRENDnet TC-NTP1 Inline PoE Tester is a compact tool designed for network professionals. It provides accurate testing for various Power over Ethernet (PoE) technologies, including 4PPoE, PoE+, PoE, and passive PoE. This device operates inline between a PoE source (PSE) and a PoE device (PD), offering real-time data on wattagд, томtagе, и amperage. It is compatible with IEEE 802.3af/at/bt PoE devices up to 100W and non-standard passive PoE devices ranging from 11V to 60V.
2. Клучни карактеристики
- PoE Technology Support: Tests 4PPoE, PoE+, PoE, and passive PoE.
- Следење во реално време: Прикажува wattagд, томtagе, и amperage of the connected PoE device.
- Multiple Testing Modes: Includes T-mode for PSE device testing, N-mode for non-standard passive PoE, and I-mode for inline PoE testing.
- Операција погодна за корисниците: Battery-free design for immediate use.
- Компатибилност: Supports IEEE 802.3af/at/bt PoE devices up to 100W and passive PoE from 11V – 60V.
- Step Button Functionality: Allows cycling through and locking display readouts for voltage, ampжестокост и ватtage.
- Гигабитни порти: Equipped with one Gigabit port for PSE connection and one Gigabit port for PoE device connection.
- Усогласеност со NDAA: Suitable for government networking solutions (U.S. and Canada Only).
3. Содржина на пакетот
- TRENDnet TC-NTP1 Inline PoE Tester
- Водич за брза инсталација
4. Производот завршиview
Слика 4.1: Аголна view of the TRENDnet TC-NTP1 Inline PoE Tester, showing the display and ports.
Слика 4.2: Врв view of the TC-NTP1, highlighting the LED display for Mode A (End-span) and Mode B (Mid-span) and the 'STEP' button.
Слика 4.3: Предна страна view of the TC-NTP1, showing the PSE (Power Sourcing Equipment) Gigabit Ethernet port.
Слика 4.4: Долна view of the TC-NTP1, showing the product information label.
5. Поставување
- Ensure the TC-NTP1 is free from any physical damage.
- The device is battery-free and ready for use upon connection. No external power source is required for its operation.
- Identify the Power Sourcing Equipment (PSE) and the Powered Device (PD) in your network setup.
6. Упатства за работа
6.1. Connecting the Tester
- Connect the Ethernet cable from your PoE source (e.g., PoE switch or injector) to the PSE port on the TC-NTP1.
- Поврзете етернет кабел од PD port on the TC-NTP1 to your PoE device (e.g., IP camera, access point).
- The TC-NTP1 will automatically power on and begin displaying information.
6.2. Testing Modes
The TC-NTP1 offers three distinct testing functions:
- T-mode (PSE Device Testing): This mode is used to determine the PoE type and voltage output of your Power Sourcing Equipment (PSE), such as a PoE switch or injector. Connect the PSE directly to the tester's PSE port.
- N-mode (Non-Standard Passive PoE Devices): Designed for testing non-standard passive PoE devices. This mode supports devices with voltage се движи од 11V до 60V.
- I-mode (PoE Inline Testing): For real-time monitoring, connect the tester inline between the PSE and the Powered Device (PD). This mode displays the voltage, ampжестокост и ватtage being delivered to the connected PD.
6.3. Using the Step Button
На ЧЕКОР button on the TC-NTP1 allows you to cycle through the displayed readouts (voltage, ampжестокост и ватtage). Pressing the button repeatedly will switch between these values. You can also press and hold the button to lock the display on a specific readout for continuous monitoring.
7. Спецификации
| Карактеристика | Детал |
|---|---|
| Број на модел | TC-NTP1 |
| Бренд | TRENDnet |
| PoE стандарди | IEEE 802.3af, 802.3at, 802.3bt |
| Supported PoE Types | 4PPoE, PoE+, PoE, Passive PoE |
| Максимална излезна моќност | До 100 W |
| Пасивен PoE Voltagе опсег | 11V – 60V |
| Пристаништа | 1 x Gigabit PSE, 1 x Gigabit PD |
| Приказ | LED (Wattage, Voltage, Amperage, Polarity) |
| Извор на енергија | Battery-Free (Powered by PoE) |
| Димензии (Д x Ш x В) | 3.9 x 1.4 x 1 инчи (99 x 36 x 25 мм) |
| Тежина | 2.82 унци (0.08 кг) |
| Работна температура | 32°F до 122°F (0°C до 50°C) |
| Сертификати | CE, FCC |
8 Смена на проблеми
- Без дисплеј/напојување: Ensure the PoE source is active and providing power. The TC-NTP1 is battery-free and draws power from the PoE connection. Verify the Ethernet cables are properly connected and functional.
- Неточни читања: Double-check that the cables are securely connected to the correct PSE and PD ports. Ensure the PoE source and device are compatible with the tester's supported standards.
- Device Not Powering On (PD): If the PoE device connected to the PD port is not powering on, use T-mode to test the PSE directly to confirm it is supplying power correctly. Then, use I-mode to check the inline power delivery.
- Polarity Issues: The tester indicates polarity. If a "REV" (Reverse Polarity) LED illuminates, there may be an issue with the PoE source or cabling.
9. Одржување
- Чистење: Користете мека, сува крпа за чистење на уредот. Не користете течни или аеросолни средства за чистење.
- Складирање: Чувајте го уредот на ладно и суво место, подалеку од директна сончева светлина и екстремни температури.
- Ракување: Handle the device with care to prevent physical damage to the ports or internal components.
10. Гаранција и поддршка
The TRENDnet TC-NTP1 Inline PoE Tester is backed by a 2-годишна заштита на производителот TRENDnet from the date of purchase. For technical assistance or warranty claims, please contact TRENDnet's customer support.
TRENDnet provides reliable technical support with English-speaking advisors and experts available during normal business hours. For support, visit the official TRENDnet website or refer to the contact information provided in the Quick Installation Guide.
За повеќе информации, посетете ја Продавница TRENDnet на Amazon.
