1. Вовед
The Ledlenser P6R Work is a robust and versatile LED rechargeable torch designed for demanding work environments. It features high dust and water protection (IP68), impact-resistant rubber covers, and chemical resistance, ensuring durability. This manual provides essential information for the proper setup, operation, and maintenance of your P6R Work torch.
2. Производот завршиview
Клучни карактеристики
- Трајност: IP68 dust and water protection, impact-protecting rubber covers, chemical resistance, and a protective lens.
- Напреден систем за фокусирање: Seamless transition between a focused spot beam and a wide flood beam.
- Функции на осветлување: Includes SOS, Strobe, and Boost modes.
- Природна светлина: High CRI 90 for accurate color reproduction.
- Помошна светлина: Diffused, cool white auxiliary light on the side for close-range illumination.
- Долг век на батеријата: Up to 45 hours of lighting on a single charge.
- Emergency Light Mode: Provides illumination during power outagес.
Вклучени компоненти
The Ledlenser P6R Work package typically includes the following items:
- Батерија на полнење
- Кабел за магнетно полнење
- Станица за полнење
- Рачна лента
- Торбичка
- USB адаптер за напојување
- Intelligent Clip (Belt Clip)
3. Поставување
Инсталација на батерија
- Unscrew the end cap of the torch by turning it counter-clockwise.
- Insert the included rechargeable battery with the positive (+) terminal facing towards the head of the torch.
- Screw the end cap back on clockwise until secure.
Почетно полнење
Пред првата употреба, целосно наполнете ја батеријата.
- Connect the magnetic charging cable to the charging port on the torch. The magnetic connector will snap into place.
- Connect the USB end of the charging cable to the USB power adapter, and then plug the adapter into a power outlet. Alternatively, use the charging station by placing the torch onto it.
- The battery indicator light will show the charging status. A full charge is indicated when the light turns green.
4. Упатства за работа
Power On/Off and Brightness Modes
The torch is operated via the main switch button located on the body.
- За вклучување/исклучување: Press the main switch button once.
- To Cycle Brightness Modes: While the torch is on, press the main switch button repeatedly to cycle through different brightness levels (e.g., Low, Medium, High).
- Режим на засилување: A quick double-press of the main switch button may activate a temporary boost mode for maximum brightness.
Special Functions (SOS, Strobe)
Specific sequences of button presses activate special functions:
- Consult the detailed instructions provided in the full product manual for exact button sequences to activate SOS and Strobe modes. These typically involve holding the button or specific multi-press patterns.
Напреден систем за фокусирање
The Advanced Focus System allows you to adjust the light beam from a broad floodlight to a sharply focused spot beam.
- To adjust the focus, slide the head of the torch forward or backward.
- Sliding forward typically narrows the beam for a spot focus.
- Sliding backward widens the beam for a flood illumination.
Помошна светлина
The P6R Work features a diffused, cool white auxiliary light on the side for close-range tasks.
- To activate the auxiliary light, locate the dedicated button or follow the specific button sequence outlined in the full manual.
- This light is ideal for illuminating immediate surroundings without the intensity of the main beam.
5. Одржување
Чистење
- Избришете го телото на факелот со мека, дamp крпа.
- Do not use abrasive cleaners or solvents, as these can damage the finish or rubber components.
- Clean the lens gently with a lens cleaning cloth to avoid scratches.
Нега на батерии
- Charge the battery regularly, even if the torch is not in frequent use, to maintain battery health.
- Store the torch and battery in a cool, dry place.
- If the torch will not be used for an extended period, remove the battery.
Водоотпорност (IP68)
The P6R Work is rated IP68, meaning it is protected against dust ingress and can withstand continuous immersion in water up to a specified depth (typically 1.5 meters for 30 minutes).
- Ensure all caps and covers are securely fastened before exposing the torch to water or dusty environments.
- After exposure to saltwater, rinse the torch with fresh water and dry thoroughly.
6 Смена на проблеми
If you encounter issues with your Ledlenser P6R Work torch, refer to the following common solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Torch does not turn on | Low or depleted battery; improperly installed battery; loose connections. | Charge the battery fully. Ensure the battery is inserted correctly with the correct polarity. Tighten the end cap securely. |
| Светлината е слаба или трепка | Low battery charge; dirty battery contacts. | Recharge the battery. Clean battery contacts with a dry cloth. |
| Torch not charging | Charging cable not properly connected; faulty USB adapter or power source; dirty charging contacts. | Ensure the magnetic charging cable is securely attached. Try a different USB power adapter or power outlet. Clean the charging contacts on both the torch and the cable. |
| Focus system is stiff | Dirt or debris in the focusing mechanism. | Gently clean the exterior of the focusing mechanism. Avoid forcing the movement. |
Доколку проблемот продолжи откако ќе се обидете со овие решенија, контактирајте ја службата за корисници на Ledlenser.
7. Спецификации
| Карактеристика | Спецификација |
|---|---|
| Број на модел | 502186 |
| Светлосна моќност (макс.) | 850 лумени |
| Растојание на зракот (максимум) | 230 метри |
| Живот на батеријата (максимум) | До 45 часа |
| Отпорност на вода | IP68 |
| Тип на извор на светлина | LED (High CRI 90) |
| Извор на енергија | Литиум-јонска батерија на полнење |
| Материјал | Aluminum with rubber protectors |
| Димензии (Д x Ш x В) | 1.57" Д x 1.57" Ш x 6.42" В |
| Тежина на ставката | 6.6 унци (0.19 килограми) |
8. Гаранција и поддршка
Информации за гаранцијата
The Ledlenser P6R Work LED torch comes with a warranty that covers defects in manufacturing. With product registration, this warranty can extend up to 7 years. Please refer to the official Ledlenser website or the warranty card included with your product for full terms and conditions.
Поддршка за корисници
For technical assistance, warranty claims, or further inquiries, please visit the official Ledlenser webвеб-страница или директно контактирајте ја нивната корисничка поддршка. Можете да најдете повеќе информации и производи на Ledlenser Store on Amazon.
