Упатство за користење на преносен стартер за автомобили BuTure BR600

1. Производот завршиview

The BuTure BR600 is a powerful and versatile portable car jump starter designed to provide emergency starting power for 12V vehicles. It also functions as a portable power bank with wireless charging capabilities and a multi-mode LED flashlight. This manual provides essential information for safe and effective use of your device.

Клучни карактеристики:

• Powerful Jump Starting: Delivers 2500A peak current to start all gasoline engines and up to 8.0L diesel engines.
• Батерија со висок капацитет: 27000mAh lithium battery for multiple jump starts and device charging.
• Безжично полнење: Integrated 10W wireless charging pad for compatible smartphones.
• Пренослив Power Bank: Equipped with USB 1 (Quick Charge 3.0: 5V 3A / 9V 2A / 12V 1.5A), USB 2 (5V 2.4A), and USB-C (5V 3A) outputs for charging various electronic devices.
• Smart Protection Clamps: Features intelligent protection against short circuits, overheating, over-voltage, over-charge, deep discharge, over-current, and reverse polarity.
• Multi-mode LED Flashlight: Includes Flashlight, Strobe, SOS, and Warning Light modes for emergencies.
• Издржлив дизајн: Operates effectively in extreme temperatures, including cold winter conditions.

2. Содржина на пакетот

Ве молиме проверете ја содржината на пакувањето по отварањето. Доколку недостасуваат или се оштетени некои предмети, контактирајте ја службата за корисници.

Image: Contents of the BuTure BR600 package.

• 1 x BuTure BR600 Jump Starter
• 1 x Smart Jumper кабли
• 1 x USB-C кабел
• 1 x EC5 Cigarette Lighter Adapter
• 1 x Упатство за употреба
• 1 x кутија за складирање

3. Важни безбедносни информации

Read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Do not immerse the product in water or expose it to rain.
• Do not open or disassemble the product. There are no user-serviceable parts inside.
• Да се ​​чува подалеку од дофат на деца.
• Користете ги само испорачаните паметни кабли за приклучување.
• Не скокајте, стартувајте замрзната батерија.
• Обезбедете правилен поларитет на поврзувањето (црвено кл.)amp до позитивен, црно clamp до негативен).
• Не поврзувајте ги позитивните и негативните clampе заедно.
• If the product becomes excessively hot during use, discontinue use immediately.
• Чувајте го производот на ладно и суво место подалеку од директна сончева светлина.
• Wear eye protection and gloves when jump starting a vehicle.
• Consult your vehicle's owner's manual for specific jump-starting procedures.

Image: The BuTure BR600 features multiple protection modes for safe operation, including error detection and intelligent indicators.

4. Charging the BuTure BR600

Before first use, fully charge the jump starter. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not in use.

4.1. Charging via USB-C Input

1. Connect the provided USB-C cable to the USB-C input port on the jump starter.
2. Поврзете го другиот крај од USB-C кабелот со USB адаптер за ѕид (не е вклучен) или полнач за автомобил.
3. The LED indicator lights will illuminate and flash to show the charging status. All four lights will be solid when fully charged.

4.2. Индикатор за нивото на батеријата

The LED indicator lights on the device show the remaining battery capacity:

• 4 lights: 75% - 100%
• 3 lights: 50% - 75%
• 2 lights: 25% - 50%
• 1 light: 0% - 25% (Recharge immediately)

Image: The BuTure BR600 features a 27000mAh battery designed for long standby times, up to 12 months.

5. Палење на возило со џебови

Ensure the jump starter is at least 50% charged (2 LED lights) before attempting to jump start a vehicle.

1. Подгответе го возилото: Turn off the vehicle's ignition and all accessories (headlights, radio, air conditioning, etc.). Engage the parking brake.
2. Поврзете ги каблите за скокање:
   • Insert the blue plug of the smart jumper cables into the 12V jump start port on the BuTure BR600. Ensure a firm connection.
   • Поврзете го ЦРВЕНО позитивен (+) clamp до позитивниот (+) терминал на батеријата на возилото.
   • Поврзете го ЦРНО негативен (-) clamp до негативниот (-) терминал на батеријата на возилото.
   • Паметниот clamp indicator light will show the connection status. Refer to the smart clamp manual for specific light indications.
3. Стартувајте го возилото: Once the smart clamp indicator shows a safe connection, start your vehicle's engine. If the vehicle does not start immediately, wait 20-30 seconds before trying again. Do not crank the engine for more than 3 seconds per attempt.
4. Remove Jumper Cables: As soon as the vehicle starts, disconnect the ЦРНО негативен (-) clamp прво, па потоа ЦРВЕНО позитивен (+) clamp from the vehicle battery. Finally, unplug the smart jumper cables from the BuTure BR600.

Важно: Ако паметниот клamp indicates an error (e.g., reverse polarity), correct the connection before attempting to start the vehicle.

Image: Illustration of connecting the BuTure BR600 to a car battery for jump starting.

Image: Step-by-step guide showing how to connect the jump starter to the vehicle battery and then start the vehicle.

Image: The BuTure BR600 is designed to perform reliably even in cold winter temperatures down to -20°C.

6. Operating Other Functions

6.1. Using as a Power Bank (USB Output)

The BuTure BR600 can charge various electronic devices via its USB output ports.

• Connect your device's USB charging cable to either the USB 1 (Quick Charge 3.0) or USB 2 port on the jump starter.
• Стартерот автоматски ќе започне со полнење на вашиот уред.

6.2. Безжично полнење

For devices compatible with 10W wireless charging:

• Place your wireless charging compatible device (e.g., smartphone) on the wireless charging pad located on the top surface of the jump starter.
• Осигурајте се дека уредот е центриран на подлогата за оптимално полнење.
• The wireless charging indicator light will illuminate to confirm charging is active.

Image: The BuTure BR600 offers both 10W wireless charging and Quick Charge 3.0 USB output for multiple devices.

6.3. LED светилка

The built-in LED flashlight has multiple modes for different situations.

• Press and hold the power button for 3 seconds to turn on the flashlight (steady light mode).
• Press the power button again to cycle through modes: Strobe → SOS → Warning Light → Off.
• Press and hold the power button again for 3 seconds to turn off the flashlight from any mode.

Image: The BuTure BR600 features an ultra-bright LED flashlight with Flash, SOS, Strobe, and Warning light modes for various emergencies.

7. Одржување

• Чистење: Користете мека, сува крпа за чистење на уредот. Не користете абразивни средства за чистење или растворувачи.
• Складирање: Store the jump starter in a cool, dry place between 0°C and 45°C (32°F and 113°F). Avoid direct sunlight and high humidity.
• Полнење: Recharge the device every 3-6 months to prevent battery degradation, even if not in use.
• Траење на батеријата: The internal lithium battery is designed for long life, but like all rechargeable batteries, its capacity will decrease over time.

8 Смена на проблеми

9. Спецификации

10. Гаранција и корисничка поддршка

BuTure products are designed and manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, product support, or technical assistance, please refer to the warranty card included in your package or visit the official BuTure webсајт.

If you encounter any issues or have questions regarding your BuTure BR600, please contact our customer support team. Provide your model number (BR600) and purchase details for faster service.