Insta360 Suction Cup Mount Instruction Manual

1. Производот завршиview

The Insta360 Suction Cup Mount is designed for securely attaching your Insta360 camera to smooth, flat surfaces, such as car windows or body panels. Its robust design and adjustable double ball mount allow for versatile camera positioning to capture a wide range of perspectives.

• Designed for Versatility: Ideal for mounting your Insta360 camera inside or on your vehicle.
• Adjustable Double Ball Mount: Provides maximum adjustability for achieving various camera angles.
• Силна вакуумска чаша: Ensures a firm and reliable attachment to smooth, flat surfaces.
• Издржлива конструкција: Made from tough, high-strength aluminum alloy.
• Компактен и пренослив: Small, foldable design for easy storage and transport.

Слика 1: Предна страна view of the Insta360 Suction Cup Mount. This image displays the mount's main components, including the suction cup base, the double ball arm, and the camera attachment point.

2. Упатства за поставување

1. Подгответе ја површината за монтирање: Ensure the surface where the suction cup will be attached is clean, dry, and smooth. Wipe away any dust, dirt, or moisture.
2. Прикачете ја камерата: Secure your Insta360 camera to the mount's attachment point. Ensure it is firmly tightened.
3. Позиционирајте ја вакуумската чаша: Press the suction cup firmly against the prepared surface. Flip the lever on the suction cup base to create a vacuum seal, securing the mount in place.
4. Проверете го вшмукувањето: Gently tug on the mount to ensure it is securely attached before mounting your camera.

Слика 2: Врв view of the suction cup base. This image highlights the lever mechanism used to activate the vacuum seal for secure attachment.

3. Упатства за работа

1. Прилагодување на аголот: Loosen the central knob on the double ball mount to adjust the camera's angle. The double ball design allows for extensive flexibility in positioning.
2. Securing the Angle: Once the desired angle is achieved, tighten the central knob firmly to lock the mount in position.
3. Препорачана употреба: For optimal performance and safety, ensure the mount is used on clean, non-porous, and flat surfaces. Avoid mounting on textured or curved surfaces.

Слика 3: Страна view of the mount, illustrating the double ball joint for angle adjustments. The central knob is used to loosen and tighten the joints.

Figure 4: An Insta360 camera securely mounted on a car hood using the suction cup mount, demonstrating a typical outdoor application.

4. Одржување

• Исчистете ја вшмукувачката чаша: Regularly clean the rubber suction cup with mild soap and water to remove any residue that could impair its grip. Allow it to air dry completely.
• Проверете дали има штета: Periodically check the suction cup and the mount's components for any signs of wear, cracks, or damage. Replace if necessary.
• Складирање: Store the mount in a clean, dry place away from direct sunlight and extreme temperatures to preserve the integrity of the rubber suction cup.

5 Смена на проблеми

• Слабо вшмукување: If the mount does not adhere properly, ensure the mounting surface is perfectly clean, dry, and smooth. Avoid porous or textured surfaces. Extreme temperatures can also affect suction; try to mount in moderate conditions.
• Планината се чувствува лабаво: Re-tighten all adjustment knobs on the double ball mount. Ensure the suction cup lever is fully engaged.

6. Спецификации

7. Гаранција и поддршка

За информации за гаранцијата и техничка поддршка, ве молиме погледнете го официјалниот Insta360 webстраницата или директно контактирајте ја нивната служба за корисници. Зачувајте го доказот за купување за какви било рекламации за гаранција.

Visit the official Insta360 Store: Insta360 Store