SHARKOON Elite Shark CA300T Extended ATX PC Case User Manual

1. Вовед

This manual provides comprehensive instructions for the SHARKOON Elite Shark CA300T Extended ATX PC Case. It covers the product's features, setup procedures, operational guidelines, maintenance tips, troubleshooting solutions, and detailed technical specifications. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your PC case.

2. Клучни карактеристики

• Футуристички дизајн: The CA300T features an expressive front panel with a geometric pattern, framed by brushed aluminum, giving it a distinctive and modern aesthetic.
• Advanced Airflow: Equipped with three pre-installed 120mm RGB LED fans at the front and one at the rear, ensuring consistent airflow. The front panel includes a mesh grille for optimal ventilation, and the top panel offers a perforated cover for additional fan/radiator mounting.
• Illuminated I/O Panel: The side-mounted I/O panel includes standard audio ports, USB 3.0 ports, and a USB-C port, all featuring their own RGB illumination.
• Панели од калено стакло: Two tempered glass side panels provide a clear view of internal components. The right-side panel is partially tinted to conceal the power supply tunnel while highlighting SSDs or HDDs.
• Пространа внатрешност: Designed to accommodate large components, including graphics cards up to 42.5 cm, power supplies up to 24 cm, and CPU coolers up to 16.5 cm.
• Ефикасно управување со кабли: Features a spacious, foldable cable compartment and a sliding cable cover to keep wiring organized and out of sight.
• Опции за складирање: Supports up to seven 2.5-inch drives or four 3.5-inch drives.

3. Содржина на пакетот

The SHARKOON Elite Shark CA300T PC Case package typically includes:

• SHARKOON Elite Shark CA300T PC Case (White)
• Pre-installed 120mm RGB LED Fans (3x Front, 1x Rear)
• Кутија за додатоци (шрафови, врвки за кабел, држачи итн.)
• Упатство за употреба (овој документ)

Note: Specific contents may vary slightly. Please check the packaging for a complete list.

4. Упатства за поставување

Follow these steps to set up your SHARKOON Elite Shark CA300T PC case and install your components.

4.1. Подготовка на случајот

1. Распакувајте го куферот: Внимателно извадете го куќиштето на компјутерот од пакувањето.
2. Отстранете ги страничните панели: Unscrew the thumbscrews on the rear of the case for both tempered glass side panels. Gently slide and lift the panels to remove them. Place them on a soft, flat surface to prevent scratches.
3. Кутија за додатоци: Пронајдете ја кутијата со додатоци во внатрешноста на куќиштето, која ги содржи сите потребни завртки и хардвер за монтирање.

4.2. Инсталација на матична плоча

1. Инсталирајте Standoffs: Ensure the correct standoffs are installed for your motherboard form factor (ATX, SSI EEB). The case typically has pre-installed standoffs for standard ATX.
2. Инсталирајте I/O штит: If your motherboard requires an external I/O shield, install it into the rear opening of the case before mounting the motherboard.
3. Монтирање на матична плоча: Carefully place your motherboard onto the standoffs, aligning the screw holes. Secure the motherboard with the provided screws.

4.3. Инсталација на единица за напојување (PSU)

1. Position PSU: The PSU mounts at the rear bottom of the case. Slide your PSU into the designated compartment from the rear.
2. Безбедно напојување: Align the PSU with the screw holes and secure it with the provided screws from the rear of the case.
3. Управување со кабли: Route PSU cables through the cutouts to the back of the motherboard tray for organized cable management.

4.4. Инсталација на диск за складирање

The CA300T supports various drive configurations:

• 2.5-inch Drives (SSDs): Mount SSDs to the dedicated brackets behind the motherboard tray or within the PSU shroud.
• 3.5-inch Drives (HDDs): Install HDDs into the drive cages located under the PSU shroud.

4.5. Инсталација на графичка картичка и картичка за проширување

1. Отстранете ги капаците на слотови: Отстранете ги потребните капаци за слотовите за проширување од задниот дел на куќиштето.
2. Инсталирање на картичка: Вметнете ја вашата графичка картичка или други картички за проширување во соодветните PCIe слотови на матичната плоча.
3. Безбедна картичка: Secure the card with the provided screws.

4.6. Поврзување на каблите на предниот панел

Connect the front panel cables (USB 3.0, USB-C, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

4.7. Завршно собрание

1. Управување со кабли: Use the cable ties and routing channels to organize all internal cables behind the motherboard tray.
2. Повторно прикачете ги страничните панели: Carefully reattach both tempered glass side panels and secure them with the thumbscrews.

Слика 1: Внатрешност view of the CA300T, highlighting component space.

5. Упатства за работа

5.1. Вклучување на вашиот систем

After all components are installed and cables are connected, plug your power supply into a wall outlet and flip the PSU's power switch to the 'ON' position. Press the power button on the case's front I/O panel to start your computer.

5.2. RGB контрола на осветлувањето

The pre-installed RGB fans and illuminated I/O panel can be controlled via your motherboard's RGB software (if compatible) or a dedicated RGB controller if included with your motherboard or purchased separately. Refer to your motherboard manual for specific RGB header locations and software instructions.

Figure 2: The CA300T with its illuminated RGB fans and distinctive front panel.

6. Одржување

Редовното одржување помага да се обезбедат оптимални перформанси и да се продолжи животниот век на компонентите на вашиот компјутер.

6.1. Чистење на филтерот за прашина

The CA300T includes magnetic dust filters. It is recommended to clean these filters every 1-3 months, depending on your environment, to maintain optimal airflow and prevent dust buildup inside the case.

1. Locate Filters: Identify the dust filters on the top, front, and bottom of the case.
2. Отстранете ги филтрите: Gently pull or slide out the magnetic dust filters.
3. Чисти филтри: Use a soft brush, vacuum cleaner, or rinse with water (ensure completely dry before reinstallation) to remove accumulated dust.
4. Повторно инсталирајте ги филтрите: Place the clean filters back into their respective positions.

6.2. Општо чистење

For external surfaces, use a soft, damp cloth to wipe down the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.

Слика 3: Врв view of the CA300T, showing the perforated top panel.

7 Смена на проблеми

Овој дел се однесува на вообичаени проблеми со кои може да се соочите за време на поставувањето или работењето.

7.1. Системот не се вклучува

• Check PSU: Ensure the power supply unit is properly connected to the wall outlet and the PSU's power switch is in the 'ON' position.
• Врски на предниот панел: Verify that the power switch cable from the case's front panel is correctly connected to the motherboard's power header.
• Internal Power Cables: Confirm that all necessary power cables (24-pin ATX, CPU 8-pin, GPU PCIe) are securely connected to the motherboard and components.

7.2. Fans Not Spinning / RGB Not Lighting Up

• Приклучоци за вентилатори: Ensure all fan power cables are securely connected to the motherboard's fan headers or a fan controller.
• RGB Connections: Verify that RGB cables are correctly connected to the motherboard's RGB headers or a dedicated RGB controller.
• Software/Controller: Check your motherboard's BIOS/UEFI settings or RGB software to ensure fans and RGB lighting are enabled and configured correctly.

7.3. USB портите не функционираат

• Internal USB Headers: Confirm that the internal USB 3.0 and USB-C cables from the case's front panel are securely connected to the corresponding headers on your motherboard.
• Драјвери за матична плоча: Ensure all necessary motherboard chipset and USB drivers are installed.

8. Технички спецификации

9. Гаранција и поддршка

9.1. Гаранција на производот

The SHARKOON Elite Shark CA300T PC Case comes with a 2 година гаранција on spare parts. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2. Софтверски ажурирања

Software updates, if applicable for any integrated components or controllers, are guaranteed until 13 април 2030 година.

9.3. Поддршка за корисници

For technical assistance, warranty claims, or further inquiries, please contact Sharkoon customer support through their official website or the retailer where the product was purchased. Have your product model and proof of purchase ready when contacting support.