1. Вовед
The KPS CONFORTLINE CRONO RF is a digital programmable thermostat designed for heating or air conditioning systems. It features a wireless communication system between its emitter and receiver units, offering flexible placement and remote temperature control. This manual provides essential information for the safe and efficient operation of your thermostat.
2. Информации за безбедност
- Installation should only be performed by qualified personnel to prevent electrical hazards.
- Пред каква било инсталација или одржување, осигурајте се дека главното напојување е исклучено.
- Не го изложувајте уредот на екстремни температури, влажност или директна сончева светлина.
- Чувајте го уредот подалеку од вода и други течности.
- Use only the specified battery type for the emitter unit.
3. Содржина на пакетот
Please check that all components are present in the package:
- 1 x Emitter Unit (Thermostat)
- 1 x Ресивер единица
- Додатоци за монтирање (завртки, ѕидни приклучоци)
- Упатство за употреба
Забелешка: 2 AA 1.5V batteries for the emitter unit are не се вклучени.
4. Поставување
4.1. Монтирање на единиците
The KPS CONFORTLINE CRONO RF system consists of two main units: an emitter (thermostat) and a receiver. The emitter unit is designed for surface wall mounting, allowing flexible placement within your living space. The receiver unit should be connected to your heating system (boiler) and a 230V mains power supply.
The maximum communication range between the emitter and receiver is 100 meters in open air and over 30 meters inside buildings, thanks to its radio frequency communication.
Figure 1: KPS CONFORTLINE CRONO RF Emitter (left) and Receiver (right) Units.
4.2. Напојување на единиците
- Emitter Unit: Insert 2 AA 1.5V batteries (not included) into the battery compartment on the back of the emitter unit.
- Приемник единица: Connect the receiver unit to a 230V 50/60Hz mains power supply and to your heating system (e.g., gas boiler or electric heating). Wiring requires professional electricians.
Слика 2: Назад view of the Receiver Unit with wiring terminals. Professional installation is recommended.
4.3. Првично спарување (доколку е потребно)
The emitter and receiver units are typically pre-paired at the factory. If they do not communicate, refer to the detailed pairing instructions in the full product manual or contact customer support.
Video 1: This video demonstrates the installation and pairing process for a similar RF programmable boiler thermostat. It provides a visual guide to connecting the units and establishing communication.
5. Упатства за работа
The emitter unit features an LCD screen with backlighting and a selection dial for easy navigation and temperature adjustment.
5.1. Екран и контроли
The LCD screen displays ambient temperature, set temperature, time, and current operating mode. Use the selection dial to navigate menus and adjust settings.
Video 2: This video illustrates the general operation and temperature adjustment using a dial on a similar smart thermostat. It highlights the intuitive control for setting desired temperatures.
5.2. Работни режими
The thermostat offers multiple operating modes to suit your needs:
- Автоматски режим: Follows the programmed schedule for temperature control.
- Рачен режим: Allows you to set a constant temperature that overrides the schedule until changed.
- Привремен рачен режим: Sets a temporary temperature that will revert to the automatic schedule after a set period.
- Режим на одмор: Maintains a specific temperature for an extended period, ideal for when you are away.
5.3. Програмирање
The thermostat supports configurable programming with 6 daily intervals. Two pre-configured programs are included for quick setup. Refer to the full manual for detailed instructions on customizing your heating schedule.
Video 3: This video demonstrates the basic operation and temperature adjustment using the dial on a similar smart thermostat, providing a quick overview на неговата функционалност.
5.4. Поставки за приказ
The thermostat's LCD display is backlit for clear visibility. You can adjust settings related to the display, such as keeping it always on, if desired.
Video 4: This video explains how to keep the thermostat's screen always on, a useful feature for continuous monitoring of temperature settings.
6. Одржување
- Clean the thermostat's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Replace the emitter unit batteries when the low battery indicator appears on the display.
- Ensure the receiver unit's power connection is secure.
7 Смена на проблеми
- Без дисплеј/напојување: Check batteries in the emitter unit. Ensure the receiver unit is properly connected to the 230V mains supply.
- No Communication (RF): Verify that both units are powered. Ensure they are within the specified communication range. Re-pair the units if necessary (refer to the full manual).
- Неточно отчитување на температурата: Ensure the emitter unit is not placed near heat sources or in direct sunlight. Calibrate the temperature if an offset is detected (refer to the full manual).
- Системот за греење не реагира: Check the wiring connections between the receiver unit and the boiler. Ensure the thermostat is in an active heating mode (e.g., Manual or Automatic with a set temperature above ambient).
8. Спецификации
| Карактеристика | Спецификација |
|---|---|
| Број на модел | 300300066 |
| Бренд | КПС |
| Тип | Дигитален програмабилен термостат |
| Технологија за поврзување | Радиофреквенција (RF) |
| Опсег на комуникација | Up to 100m (open air), >30m (indoors) |
| Emitter Power Supply | 2 x AA батерии 1.5V (не се вклучени) |
| Ресивер Напојување | 230V 50/60Hz Mains Connection |
| Тип на дисплеј | LCD со задно осветлување |
| Опсег на мерење на температурата | 0ºC - 40ºC |
| Точност на температурата | 0.5ºC |
| Опсег на поставување на температурата | 5ºC - 35ºC |
| Switching Contact | Potential-free, max 5A/230V |
| Работни режими | Automatic, Manual, Temporary Manual, Holiday |
| Програмирање | 6 daily intervals, 2 pre-configured programs |
| Димензии на емитер | 86x86x29 mm |
| Димензии на ресиверот | 86x86x29 mm |
| Тежина | 300 g (total product) |
| Сертификати | EN 60730-1:2011, EN 60730-2-9:2010 |
9. Гаранција и поддршка
This KPS product is covered by a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the documentation provided with your purchase or visit the KPS official webсајт.
For technical support, troubleshooting assistance, or any questions regarding your KPS CONFORTLINE CRONO RF thermostat, please contact KPS customer service through the contact information provided in your product packaging or on the official KPS webсајт.
