Fractal Design Pop Mini Air RGB PC Case Instruction Manual

1. Производот завршиview

The Fractal Design Pop Mini Air RGB PC Case (Model: FD-C-POR1M-01) is a mini-tower computer case designed to accommodate mATX and Mini ITX motherboards. It features a tempered glass side panel, three pre-installed 120mm Aspect RGB fans, and a mesh front panel for optimal airflow. The case also includes convenient storage solutions and cable management features.

Предна страна view of the Fractal Design Pop Mini Air RGB PC Case, showcasing the mesh panel and illuminated RGB fans.

Внатрешност view of the Fractal Design Pop Mini Air RGB PC Case, highlighting the spacious layout and component compatibility.

2. Поставување и инсталација

2.1 Unpacking the Case

Внимателно извадете го куќиштето на компјутерот од пакувањето. Проверете дали има оштетувања за време на транспортот. Зачувајте ги сите материјали за пакување за идни транспортни или гарантни барања.

2.2 Отстранување на странични панели

The tempered glass side panel is secured by two thumbscrews at the rear. Unscrew these and gently pull the panel away from the chassis. The opposite side panel can be removed similarly.

Rear angle view of the PC case, showing the thumbscrews for the tempered glass side panel.

2.3 Инсталација на матична плоча

The Pop Mini Air supports mATX and Mini ITX motherboards. Install your motherboard onto the pre-installed standoffs. Ensure all screws are tightened securely.

2.4 Инсталација на напојување

The power supply mounts at the bottom rear of the case. Slide the power supply into its designated bay and secure it with screws from the rear. The case supports ATX power supplies up to 170mm in length.

2.5 Инсталација на диск за складирање

Куферот нуди разновидни опции за складирање:

• SSD Trays: Two SSD trays are located behind the motherboard tray. These trays can be easily removed for installation and can also be mounted on the power supply cover for display.
• HDD/SSD Bays: Two removable storage trays are located in the bottom section of the case, supporting both 3.5-inch and 2.5-inch drives.
• 5.25" Bays: Two neatly concealed 5.25" bays with a storage drawer and magnetic cover are accessible at the front bottom of the case.

Заден ентериер view showing SSDs mounted on the motherboard tray.

2.6 Graphics Card and CPU Cooler Installation

The case supports graphics cards as long as 405mm and CPU coolers up to 170mm tall. Install these components according to their respective manufacturer's instructions.

2.7 Управување со кабли

Utilize the multiple large cable routing channels and pre-installed Velcro cable ties behind the motherboard tray to manage cables effectively. This ensures optimal airflow and a clean build appearance.

Заден ентериер view demonstrating cable management options.

3. Ракување со куќиштето на компјутерот

3.1 Преден влезно/излезен панел

The front I/O panel is located on the top right side of the case and includes:

• 1 x USB Type-C connection (Note: May require an optional accessory for full functionality)
• 2 x USB 3.0 порти
• 1 x USB 2.0 порта
• Приклучок за слушалки
• Приклучок за микрофон
• Small button for RGB controller
• Larger power button

Close-up of the top I/O panel with USB ports, audio jacks, and power/RGB buttons.

3.2 RGB Fan Control

The three pre-installed Aspect RGB fans can be controlled via a dedicated button on the top I/O panel or connected to your motherboard's ARGB header for software control. Pressing the button cycles through various colors and lighting effects. Pressing and holding the button will stop on the current color.

4. Одржување

4.1 Чистење на филтерот за прашина

The case features a removable magnetic dust filter on the top panel and a pull-out filter at the rear for the power supply. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the case.

Top dust filter being removed for cleaning, revealing the fan mounts underneath.

4.2 Општо чистење

Use a soft, dry cloth to wipe down the exterior of the case. For the tempered glass panel, use a glass cleaner and a microfiber cloth to avoid scratches.

5 Смена на проблеми

5.1 Fans Not Spinning/RGB Not Lighting Up

• Check all fan power connections to the motherboard or power supply.
• Ensure ARGB cables are securely connected to the motherboard header or the case's integrated RGB controller.
• If using the integrated controller, press the RGB button on the I/O panel to cycle through modes or ensure it's not turned off.

5.2 Poor Airflow/High Temperatures

• Verify that all fans are spinning correctly and oriented for proper airflow (front fans intake, rear/top fans exhaust).
• Исчистете ги сите филтри за прашина за да обезбедите неограничен проток на воздух.
• Ensure no cables are obstructing fan blades or airflow paths.

5.3 Front I/O Ports Not Functioning

• Check that all front I/O cables (USB, audio) are correctly connected to the corresponding headers on your motherboard.
• Ensure the USB Type-C cable is connected to a compatible header on your motherboard (if applicable, as some models may require an optional accessory).

6. Спецификации

Diagram showing the dimensions of the Fractal Design Pop Mini Air RGB PC Case.

7. Гаранција и поддршка

For warranty information and technical support, please visit the official Fractal Design website or contact their customer service. Keep your purchase receipt and product model number (FD-C-POR1M-01) handy for any inquiries.

Плановите за заштита се достапни за купување одделно:

• 3-годишен план за заштита: 13.49 долари
• 4-годишен план за заштита: 17.99 долари
• Целосна заштита: 16.99 долари месечно (ги опфаќа сите подобни минати и идни купувања)