Rydeen CM-MINy3

RYDEEN CM-MINy3 Backup/Front View Прирачник за употреба на камерата

Model: CM-MINy3

1. Вовед

The RYDEEN CM-MINy3 is a versatile camera designed for use as both a backup and front view camera in various vehicles, including cars, pickup trucks, SUVs, RVs, and vans. It features a Super CMOS IV Sensor with NightVision Technology, providing clear images in low-light conditions. Its compact design and durable, waterproof housing ensure reliable performance.

2. Карактеристики на производот

3. Содржина на пакетот

Проверете дали сите компоненти се присутни пред да започнете со инсталацијата.

RYDEEN CM-MINy3 camera and wiring harnesses

Image: The RYDEEN CM-MINy3 camera, power wire harness, compact quick disconnect, and RCA video cable.

4. Водич за инсталација

Professional installation is recommended. Disconnect the vehicle's battery before starting any electrical work.

4.1 Camera Installation Position Options

The camera can be positioned either on the bottom side of the trunk lid or on the face side of the rear trunk lid. It can be mounted using double-sided adhesive tape or by drilling into the deck lid with short sheet metal screws. Disassembly of the camera mounting bracket may be necessary depending on the chosen mounting location.

Diagram showing two camera installation positions: under trunk lip and on trunk face

Image: Diagram illustrating two possible mounting locations for the camera on a vehicle's trunk lid.

4.2 Електрично поврзување

The CM-MINy3 features jumper wires for configuration. Ensure proper connections to the monitor, reverse lamp, and ACC/IGN output as per the desired camera configuration (backup or front view).

Electrical connection diagrams for backup and front cameras

Image: Detailed wiring diagrams for connecting the camera as a backup camera (Scenario A and B) or a front camera (Scenario C).

The camera features a small size connector for easy routing through tight spaces during installation.

RYDEEN CM-MINy3 camera with small connector detail

Image: The camera unit highlighting its compact connector, designed for easier installation.

4.3 Прилагодување на аголот

After mounting the camera, adjust its angle for optimal viewing. Secure the parking brake, shift the vehicle into reverse, and adjust the camera as needed. Once the desired angle is set, tighten the bolt on the camera to secure its position.

Diagram showing camera angle adjustment

Image: Diagram illustrating how to adjust the camera's viewагол на наклон по инсталацијата.

5. Упатства за работа

Once installed and configured, the CM-MINy3 camera operates automatically based on its connection type.

Video: This video demonstrates the features and installation of the RYDEEN CM-MINy3 camera, including its compact design, waterproof rating, and the functionality of parking lines for confident reversing, both day and night. It also shows a comparison of image quality.

6. Одржување

The RYDEEN CM-MINy3 camera is designed for durability and requires minimal maintenance.

7 Смена на проблеми

If you encounter issues with your CM-MINy3 camera, refer to the following common troubleshooting steps:

ПроблемМожна причинаРешение
Нема слика на мониторот
  • Лабава врска со видео кабел.
  • Нема струја до камерата.
  • Избран е неточен влез на мониторот.
  • Damaged camera or cable.
  • Check all RCA video connections.
  • Verify power and ground connections to the camera.
  • Проверете дали мониторот е поставен на точниот видео влез.
  • Inspect camera and cables for visible damage.
Сликата е заматена или искривена
  • Валкана леќа на камерата.
  • Лабава монтажа на камерата.
  • Interference from vehicle electronics.
  • Исчистете ја леќата на камерата.
  • Ensure the camera is securely mounted and adjusted.
  • Check wiring for proper shielding and routing away from power sources.
Parking lines not appearing/incorrect
  • Green loop jumper wire incorrectly configured.
  • Ensure the green loop is disconnected for parking lines ON (default). Connect it to turn parking lines OFF.
Image is mirrored/not mirrored incorrectly
  • White loop jumper wire incorrectly configured.
  • Ensure the white loop is connected for mirror image (rear view, default). Disconnect it for standard image (front view).

8. Спецификации

СпецификацијаВредност
Број на моделCM-MINy3
Тип на сензорSuper CMOS IV Sensor with NightVision Technology
Водоотпорен рејтингIP67 - IP68
Резолуција480 ТВ линии
Минимално осветлување<0.3 Лукс
Видео системNTSC (color)
Viewинголен агол170 степени
Image SelectableMirror/Standard
Паркинг линииИзберете вклучено/исклучено
Димензии на производот0.78"Д x 0.78"Ш x 0.78"В
Тежина на ставката1 фунта
Voltage12 волти
Големина на оптичкиот сензор1/3 инчи
Тип на конекторRCA

9. Гаранција и поддршка

For warranty information or technical support regarding your RYDEEN CM-MINy3 camera, please refer to the documentation included with your purchase or visit the official Rydeen website. You may also contact Rydeen customer service directly for assistance.

Производител: Rydeen

Webсајт: Rydeen Official Store on Amazon

Поврзани документи - CM-MINy3

Предview Упатство за сопственик на самостоен монитор за резервна копија Rydeen M7020P од 7 инчи
Official owner's manual for the Rydeen M7020P 7-inch stand-alone backup monitor. Includes specifications, installation guidance, functions, warranty information, and wiring diagrams.
Предview RYDEEN 360 VIEW Quick Reference Guide - Surround View Цртеж камера
Concise guide for the RYDEEN 360 VIEW задниот делview mirror dashcam, covering installation, features, settings, and support. Learn about its surround view capabilities and user interface.
Предview Rydeen CM-AHD1 Backup Camera Owner's Manual
Official owner's manual for the Rydeen CM-AHD1 high-definition AHD backup camera. Includes specifications, installation instructions, warranty information, and technical support contact details.
Предview Упатство за сопственик и информации за гаранција за адаптер за ранец Rydeen BP1
Официјално упатство за сопственикот и детали за едногодишна ограничена гаранција за адаптерот за ранец Rydeen BP1, дизајниран за задни тркала Rydeen од 10 инчи.view огледала. Вклучува белешки за инсталација и информации за контакт со техничка поддршка.
Предview Систем за мониторинг на ретровизор за замена Rydeen EV486A со автоматско затемнување - упатство за сопственикот
Упатство за сопственикот за системот за резервно огледало Rydeen EV486A со автоматско затемнување. Вклучува информации за инсталација, поврзување, поставување, решавање проблеми и гаранција.
Предview Упатство за сопственик на самостоен монитор за резервна копија Rydeen M7000P од 7 инчи
Официјално упатство за сопственикот за самостоен монитор за резервна копија Rydeen M7000P од 7 инчи. Вклучува информации за гаранцијата, спецификации, шема за поврзување, опции за монтирање, главни функции, ракување со копчиња и детали за далечинско управување за задниот дел од автомобилот.view системи.