1. Вовед
Thank you for choosing the Tasmor 76-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light. Please read this manual thoroughly before use and retain it for future reference.
2. Производот завршиview
2.1 Клучни карактеристики
- Висока осветленост: Equipped with 76 warm white energy-saving LEDs, providing 170 lumens of soft, flicker-free light. Color rendering index (CRI) is over 80.
- Режим на сензор за движење: Features 3 lighting modes (ON/OFF/Auto). In Auto mode, it detects motion within 3 meters (approximately 10 feet) in darkness and automatically turns off after about 18 seconds of no motion. The detection angle is 120°. If ambient brightness is sufficient, the light will not activate.
- USB се полни: Conveniently rechargeable via the included USB cable, eliminating the need for frequent battery replacement.
- Лесна инсталација: Magnetic attachment allows for simple installation and removal. No tools required.
- Разновидна апликација: Ideal for kitchens, stairs, cabinets, offices, walls, mirrors, closets, hallways, basements, workshops, garages, or as an emergency light.
- Издржлива конструкција: Л.amp housing is made of high-quality aluminum alloy, which is rust-proof and easy to clean.
2.2 Содржина на пакетот
- Tasmor 76-LED Motion Sensor Cabinet Light
- USB кабел за полнење
- Magnetic Metal Sheets (for adhesive mounting)
- Упатство за употреба
Image 2.2.1: The Tasmor 76-LED Motion Sensor Cabinet Light, showing the light bar, USB charging cable, and two magnetic metal sheets for installation.
3. Технички спецификации
| Бренд | Тасмор |
| Модел | B08LV41TPC |
| Димензии на производот (Д x Ш x В) | 40.5 x 4 x 0.95 cm (15.9 x 1.6 x 0.4 инчи) |
| Тежина | 220 грама (0.48 lbs) |
| Материјал | Iron (housing) |
| Стил | Современа |
| Светла боја | Топло бело |
| Број на LED диоди | 76 |
| Светлосен флукс | 170 лумени |
| Температура на боја | 3000 илјади |
| Индекс на рендерирање на бои (CRI) | 80.00 |
| Voltage | 3.7 волти |
| Моќ | 3 вати |
| Специјална карактеристика | Детектор на движење |
| Извор на енергија | Напојува со батерија (USB се полни) |
4. Поставување и инсталација
The Tasmor cabinet light is designed for easy, tool-free installation using its magnetic attachment system.
4.1 Чекори за инсталација
- Подгответе ја површината: Темелно исчистете ја саканата површина за инсталација за да се осигурате дека е сува и без прашина или маснотии.
- Attach Metal Sheets: Peel off the protective film from the adhesive side of the provided magnetic metal sheets. Firmly press the metal sheets onto the cleaned surface. Ensure they are spaced appropriately for the length of the light bar.
- Монтирајте ја светлината: The light bar has built-in magnets. Simply align the light bar with the installed metal sheets and allow the magnets to secure it in place.
Image 4.1.1: Step-by-step visual guide for installing the light: 1. Cleaning the surface, 2. Attaching the adhesive metal sheet, 3. Magnetically mounting the light bar.
Магнетниот приклучок овозможува лесно отстранување на светлосната лента за полнење или преместување.
4.2 Прample Апликации
Image 4.2.1: Lights installed inside a closet for enhanced visibility.
Image 4.2.2: Lights providing illumination in a bedroom wardrobe and above a desk.
5. Упатства за работа
The light features a switch to select between three operating modes:
- ВКЛУЧЕН режим: Светлото останува постојано вклучено.
- ИСКЛУЧЕН режим: Светлото останува исклучено.
- АВТОМАТСКИ режим (сензор за движење): The light will automatically turn on when motion is detected in a dark environment. It will turn off approximately 18 seconds after motion ceases. The detection range is up to 3 meters (10 feet) with a 120° angle. The sensor will not activate if the ambient light is sufficient.
Image 5.1.1: The light operating in Auto mode, detecting motion within a 120° angle in a kitchen environment.
6. Полнење на уредот
The Tasmor cabinet light is equipped with a rechargeable battery. When the battery is low, the light output may diminish or cease. To charge:
- Remove the light bar from its magnetic mounting.
- Connect the included USB charging cable to the charging port on the light bar.
- Connect the other end of the USB cable to a standard USB power source (e.g., USB adapter, power bank, computer USB port).
- An indicator light will show the charging status: typically red for charging and blue for fully charged.
Image 6.1.1: Close-up of the light bar showing the USB charging port and indicator lights for 'Recharging' (red) and 'Fully Charged' (blue).
7. Нега и одржување
- Чистење: Use a soft, dry cloth to wipe the surface of the light. For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters the electronic components. Do not use abrasive cleaners or solvents.
- Складирање: If storing the light for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge periodically to maintain battery health.
- Животна средина: Avoid exposing the light to extreme temperatures, direct sunlight, or high humidity.
8. Водич за решавање проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Light does not turn on in AUTO mode. |
|
|
| Светлото не се гаси. |
|
|
| Светлината е слаба. | Батеријата е ниска. | Charge the light fully. |
| Светлината не се полни. |
|
|
9. Гаранција и корисничка поддршка
Information regarding specific warranty terms and conditions for this product is not available in the provided data. For warranty claims, technical support, or any other inquiries, please contact Tasmor customer service through your purchase platform or the official Tasmor webсајт.
